# Makefile.in generated by automake 1.7.6 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



srcdir = .
top_srcdir = ..

pkgdatadir = $(datadir)/lighttpd
pkglibdir = $(libdir)/lighttpd
pkgincludedir = $(includedir)/lighttpd
top_builddir = ..

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/ginstall -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_triplet = i686-pc-linux-gnu
ACLOCAL = ${SHELL} /root/lighttpd-1.3.16/missing --run aclocal-1.7
AMDEP_FALSE = #
AMDEP_TRUE = 
AMTAR = ${SHELL} /root/lighttpd-1.3.16/missing --run tar
AR = ar
ATTR_LIB = 
AUTOCONF = ${SHELL} /root/lighttpd-1.3.16/missing --run autoconf
AUTOHEADER = ${SHELL} /root/lighttpd-1.3.16/missing --run autoheader
AUTOMAKE = ${SHELL} /root/lighttpd-1.3.16/missing --run automake-1.7
AWK = gawk
BZ_LIB = -lbz2
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -O2 -march=i586 -mcpu=i686 -Wall -W -Wshadow -pedantic
CHECK_WITH_FASTCGI_FALSE = 
CHECK_WITH_FASTCGI_TRUE = #
CPP = gcc -E
CPPFLAGS =  -D_REENTRANT  -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGE_FILES
CROSS_COMPILING_FALSE = 
CROSS_COMPILING_TRUE = #
CRYPT_LIB = -lcrypt
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -O2 -march=i586 -mcpu=i686
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DL_LIB = -ldl
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = grep -E
EXEEXT = 
F77 = 
FFLAGS = 
GDBM_LIB = 
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
LBER_LIB = 
LDAP_LIB = 
LDFLAGS = 
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LTLIBOBJS = 
LUA_LIB = 
MAINT = #
MAINTAINER_MODE_FALSE = 
MAINTAINER_MODE_TRUE = #
MAKEINFO = ${SHELL} /root/lighttpd-1.3.16/missing --run makeinfo
MEMCACHE_LIB = 
MYSQLCONFIG = /usr/bin/mysql_config
MYSQL_INCLUDE = 
MYSQL_LIBS = 
NO_RDYNAMIC_FALSE = 
NO_RDYNAMIC_TRUE = #
OBJEXT = o
PACKAGE = lighttpd
PACKAGE_BUGREPORT = jan@kneschke.de
PACKAGE_NAME = lighttpd
PACKAGE_STRING = lighttpd 1.3.16
PACKAGE_TARNAME = lighttpd
PACKAGE_VERSION = 1.3.16
PATH_SEPARATOR = :
PCRECONFIG = /usr/bin/pcre-config
PCRE_LIB = -L/usr/lib -lpcre
RANLIB = ranlib
SENDFILE_LIB = 
SET_MAKE = 
SHELL = /bin/sh
SSL_LIB = 
STRIP = strip
U = 
VERSION = 1.3.16
Z_LIB = -lz
ac_ct_AR = ar
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_F77 = 
ac_ct_RANLIB = ranlib
ac_ct_STRIP = strip
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE = 
am__fastdepCXX_FALSE = #
am__fastdepCXX_TRUE = 
am__include = include
am__leading_dot = .
am__quote = 
bindir = ${exec_prefix}/bin
build = i686-pc-linux-gnu
build_alias = 
build_cpu = i686
build_os = linux-gnu
build_vendor = pc
datadir = ${prefix}/share
exec_prefix = ${prefix}
host = i686-pc-linux-gnu
host_alias = 
host_cpu = i686
host_os = linux-gnu
host_vendor = pc
includedir = ${prefix}/include
infodir = ${prefix}/info
install_sh = /root/lighttpd-1.3.16/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = ${prefix}/var
mandir = ${prefix}/man
oldincludedir = /usr/include
prefix = /usr
program_transform_name = s,x,x,
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
sysconfdir = ${prefix}/etc
target = i686-pc-linux-gnu
target_alias = 
target_cpu = i686
target_os = linux-gnu
target_vendor = pc
dist_man1_MANS = lighttpd.1 spawn-fcgi.1

DOCS = accesslog.txt \
authentication.txt \
cgi.txt \
compress.txt \
configuration.txt \
fastcgi-state.txt \
fastcgi.txt \
features.txt \
performance.txt \
plugins.txt \
proxy.txt \
redirect.txt \
rewrite.txt \
secdownload.txt \
security.txt \
simple-vhost.txt \
skeleton.txt \
ssi.txt \
ssl.txt \
state.txt \
rrdtool.txt \
alias.txt \
userdir.txt \
mysqlvhost.txt \
access.txt \
traffic-shaping.txt \
setenv.txt \
status.txt \
scgi.txt \
cml.txt \
trigger_b4_dl.txt


HTMLDOCS = accesslog.html \
	 authentication.html \
	 cgi.html \
	 compress.html \
	 configuration.html \
	 fastcgi-state.html \
	 fastcgi.html \
	 features.html \
	 performance.html \
	 plugins.html \
	 proxy.html \
	 redirect.html \
	 rewrite.html \
	 secdownload.html \
	 security.html \
	 simple-vhost.html \
	 skeleton.html \
	 ssi.html \
	 ssl.html \
	 state.html \
	 rrdtool.html \
	 alias.html \
	 userdir.html \
	 mysqlvhost.html \
	 access.html \
	 traffic-shaping.html \
	 setenv.html \
	 status.html \
	 scgi.html \
	 cml.html \
	 trigger_b4_dl.html


EXTRA_DIST = lighttpd.conf lighttpd.user \
	rc.lighttpd rc.lighttpd.redhat sysconfig.lighttpd \
	rrdtool-graph.sh \
	state.dot fastcgi-state.dot \
	spawn-php.sh \
	newstyle.css \
	oldstyle.css \
	$(DOCS)

subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
DIST_SOURCES =

NROFF = nroff
MANS = $(dist_man1_MANS)
DIST_COMMON = $(dist_man1_MANS) Makefile.am Makefile.in
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: # Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile
Makefile: # $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:

man1dir = $(mandir)/man1
install-man1: $(man1_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(man1dir)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
	done
uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(MANS)

installdirs:
	$(mkinstalldirs) $(DESTDIR)$(man1dir)
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am

distclean-am: clean-am distclean-generic distclean-libtool

dvi: dvi-am

dvi-am:

info: info-am

info-am:

install-data-am: install-man

install-exec-am:

install-info: install-info-am

install-man: install-man1

installcheck-am:

maintainer-clean: maintainer-clean-am

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-info-am uninstall-man

uninstall-man: uninstall-man1

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	clean-local distclean distclean-generic distclean-libtool \
	distdir dvi dvi-am info info-am install install-am install-data \
	install-data-am install-exec install-exec-am install-info \
	install-info-am install-man install-man1 install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-info-am uninstall-man uninstall-man1


%.html: %.txt
	rst2html.py $^ > $@

html: $(HTMLDOCS)

#%.ps.gz: %.ps
#	gzip $^

#%.ps: %.dot
#	dot -Tps -o $@ $^   

clean-local:
	rm -f *.html
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
