chan_mobile

Asterisk Channel Driver to allow Bluetooth Cell/Mobile Phones to be used as FXO devices, and Headsets as FXS devices.


Features :-

Multiple Bluetooth Adapters supported.
Multiple phones can be connected.
Multiple headsets can be connected.
Asterisk automatically connects to each configured mobile phone / headset when it comes in range.
CLI command to discover bluetooth devices.
Inbound calls on the mobile network to the mobile phones are handled by Asterisk, just like inbound calls on a Zap channel.
CLI passed through on inbound calls.
Dial outbound on a mobile phone using Dial(Mobile/device/nnnnnnn) in the dialplan.
Dial a headset using Dial(Mobile/device) in the dialplan.
Application MobileStatus can be used in the dialplan to see if a mobile phone / headset is connected.
Supports devicestate for dialplan hinting.
Supports Inbound and Outbound SMS.
Supports 'channel' groups for implementing 'GSM Gateways'


Requirements :-

In order to use chan_mobile, you must have a working bluetooth subsystem on your Asterisk box.
This means one or more working bluetooth adapters, and the BlueZ packages.

Any bluetooth adapter supported by the Linux kernel will do, including usb bluetooth dongles.

The BlueZ package you need is bluez-utils. If you are using a GUI then you might want to install bluez-pin also.
You also need libbluetooth, and libbluetooth-dev if you are compiling Asterisk from source.

You need to get bluetooth working with your phone before attempting to use chan_mobile.
This means 'pairing' your phone or headset with your Asterisk box. I dont describe how to do this here as the process
differs from distro to distro. You only need to pair once per adapter.

See www.bluez.org for details about setting up Bluetooth under Linux.


Concepts :-

chan_mobile deals with both bluetooth adapters and bluetooth devices. This means you need to tell chan_mobile about the
bluetooth adapters installed in your server as well as the devices (phones / headsets) you wish to use.

chan_mobile currently only allows one device (phone or headset) to be connected to an adapter at a time. This means you need
one adapter for each device you wish to use simultaneously. Much effort has gone into trying to make multiple devices per adapter
work, but in short it doesnt.

Periodically chan_mobile looks at each configured adapter, and if it is not in use (i.e. no device connected) will initiate a
search for devices configured to use this adapater that may be in range. If it finds one it will connect the device and it
will be available for Asterisk to use. When the device goes out of range, chan_mobile will disconnect the device and the adapter
will become available for other devices.


Configuring chan_mobile :-

The configuration file for chan_mobile is /etc/asterisk/mobile.conf. It is a normal Asterisk config file consisting of sections and key=value pairs.

See configs/mobile.conf.sample for an example and an explanation of the configuration.


Using chan_mobile :-

chan_mobile.so must be loaded either by loading it using the Asterisk CLI, or by adding it to /etc/asterisk/modules.conf

Search for your bluetooth devices using the CLI command 'mobile search'. Be patient with this command as
it will take 8 - 10 seconds to do the discovery. This requires a free adapter.

Headsets will generally have to be put into 'pairing' mode before they will show up here.

This will return something like the following :-

*CLI> mobile search
Address           Name                           Usable Type    Port
00:12:56:90:6E:00 LG TU500                       Yes    Phone   4
00:80:C8:35:52:78 Toaster                        No     Headset 0
00:0B:9E:11:74:A5 Hello II Plus                  Yes    Headset 1
00:0F:86:0E:AE:42 Daves Blackberry               Yes    Phone   7

This is a list of all bluetooth devices seen and whether or not they are usable with chan_mobile.
The Address field contains the 'bd address' of the device. This is like an ethernet mac address.
The Name field is whatever is configured into the device as its name.
The Usable field tells you whether or not the device supports the Bluetooth Handsfree Profile or Headset profile.
The Type field tells you whether the device is usable as a Phone line (FXO) or a headset (FXS)
The Port field is the number to put in the configuration file.

Choose which device(s) you want to use and edit /etc/asterisk/mobile.conf. There is a sample included
with the Asterisk-addons source under configs/mobile.conf.sample.

Be sure to configure the right bd address and port number from the search. If you want inbound
calls on a device to go to a specific context, add a context= line, otherwise the default will
be used. The 'id' of the device [bitinbrackets] can be anything you like, just make it unique.

If you are configuring a Headset be sure to include the type=headset line, if left out it defaults
to phone.

The CLI command 'mobile show devices' can be used at any time to show the status of configured devices,
and whether or not the device is capable of sending / receiving SMS via bluetooth.

*CLI> mobile show devices 
ID              Address           Group Adapter         Connected State SMS
headset         00:0B:9E:11:AE:C6 0     blue            No        Init  No 
LGTU550         00:E0:91:7F:46:44 1     dlink           No        Init  No 
*CLI>

As each phone is connected you will see a message on the Asterisk console :-

 Loaded chan_mobile.so => (Bluetooth Mobile Device Channel Driver)
    -- Bluetooth Device blackberry has connected.
    -- Bluetooth Device dave has connected.

To make outbound calls, add something to you Dialplan like the following :- (modify to suit)

; Calls via LGTU5500
exten => _9X.,1,Dial(Mobile/LGTU550/${EXTEN:1},45)
exten => _9X.,n,Hangup

To use channel groups, add an entry to each phones definition in mobile.conf like group=n
where n is a number.

Then if you do something like Dial(Mobile/g1/123456) Asterisk will dial 123456 on the first
connected free phone in group 1.

Phones which do not have a specific 'group=n' will be in group 0.


To dial out on a headset, you need to use some other mechanism, because the headset is not likely
to have all the needed buttons on it. res_clioriginate is good for this :-

*CLI> originate Mobile/headset extension NNNNN@context

This will call your headset, once you answer, Asterisk will call NNNNN at context context

Dialplan hints :-

chan_mobile supports 'device status' so you can do somthing like

exten => 1234,hint,SIP/30&Mobile/dave&Mobile/blackberry


MobileStatus Application :-

chan_mobile also registers an application named MobileStatus. You can use this in your Dialplan
to determine the 'state' of a device.

For example, suppose you wanted to call dave's extension, but only if he was in the office. You could
test to see if his mobile phone was attached to Asterisk, if it is dial his extension, otherwise dial his
mobile phone.

exten => 40,1,MobileStatus(dave,DAVECELL)
exten => 40,2,GotoIf($["${DAVECELL}" = "1"]?3:5)
exten => 40,3,Dial(ZAP/g1/0427466412,45,tT)
exten => 40,4,Hangup
exten => 40,5,Dial(SIP/40,45,tT)
exten => 40,6,Hangup

MobileStatus sets the value of the given variable to :-

1 = Disconnected. i.e. Device not in range of Asterisk, or turned off etc etc
2 = Connected and Not on a call. i.e. Free
3 = Connected and on a call. i.e. Busy


SMS Sending / Receiving

If Asterisk has detected your mobile phone is capable of SMS via bluetooth, you will be able to send and
receive SMS.

Incoming SMS's cause Asterisk to create an inbound call to the context you defined in mobile.conf or the default
context if you did not define one. The call will start at extension 'sms'. Two channel variables will be available,
SMSSRC = the number of the originator of the SMS and SMSTXT which is the text of the SMS.
This is not a voice call, so grab the values of the variables and hang the call up.

So, to handle incoming SMS's, do something like the following in your dialplan

[incoming-mobile]
exten => sms,1,Verbose(Incoming SMS from ${SMSSRC} ${SMSTXT})
exten => sms,n,Hangup()

The above will just print the message on the console.

If you use res_jabber, you could do something like this :-

[incoming-mobile]
exten => sms,1,JabberSend(transport,user@jabber.somewhere.com,SMS from ${SMSRC} ${SMSTXT})
exten => sms,2,Hangup()

To send an SMS, use the application MobileSendSMS like the following :-

exten => 99,1,MobileSendSMS(dave,0427123456,Hello World)

This will send 'Hello World' via device 'dave' to '0427123456'


DTMF Debouncing :-

DTMF detection varies from phone to phone. There is a configuration variable that allows you to tune
this to your needs. e.g. in mobile.conf

[LGTU550]
address=00:12:56:90:6E:00
port=4
context=incoming-mobile
dtmfskip=50

change dtmfskip to suit your phone. The default is 200. The larger the number, the more chance of missed DTMF.
The smaller the number the more chance of multiple digits being detected.


Debugging :-

Different phone manufacturers have different interpretations of the Bluetooth Handsfree Profile Spec.
This means that not all phones work the same way, particularly in the connection setup / initialisation
sequence. I've tried to make chan_mobile as general as possible, but it may need modification to
support some phone i've never tested.

Some phones, most notably Sony Ericsson 'T' series, dont quite conform to the Bluetooth HFP spec.
chan_mobile will detect these and adapt accordingly. The T-610 and T-630 have been tested and
work fine.

If your phone doesnt behave has expected, turn on Asterisk debugging with 'core set debug 1'.

This will log a bunch of debug messages indicating what the phone is doing, importantly the rfcomm
conversation between Asterisk and the phone. This can be used to sort out what your phone is doing
and make chan_mobile support it.

Be aware also, that just about all mobile phones behave differently. For example my LG TU500 wont dial unless
the phone is a the 'idle' screen. i.e. if the phone is showing a 'menu' on the display, when you dial via
Asterisk, the call will not work. chan_mobile handles this, but there may be other phones that do
other things too...

Important: Watch what your mobile phone is doing the first few times. Asterisk wont make random calls but
if chan_mobile fails to hangup for some reason and you get a huge bill from your telco, dont blame me ;)


Feedback, Support, Please can you make Mobile Phone X work... etc :-

as always, bugs should be reported at http://bugs.digium.com

email me at   david.bowerman at gmail.com   or dseeb_ on #asterisk & #asterisk-dev irc.
