<?xml version="1.0" encoding="utf-8"?>
<media_info><info fn="rpmstats-0.7-1mdv2011.0.src"
 sourcerpm=''
 url=''
 license='GPLv2+'>
rpmstats retrieves statistics about installed packages.
</info><info fn="gdb-7.1-3mdv2011.0.src"
 sourcerpm=''
 url='http://www.gnu.org/software/gdb/'
 license='GPLv3+'>
Gdb is a full featured, command driven debugger. Gdb allows you to
trace the execution of programs and examine their internal state at
any time.  Gdb works for C and C++ compiled with the GNU C compiler
gcc.

If you are going to develop C and/or C++ programs and use the GNU gcc
compiler, you may want to install gdb to help you debug your programs.
</info><info fn="deltarpm-3.4-8mdv2011.0.src"
 sourcerpm=''
 url='http://www.novell.com/products/linuxpackages/suselinux/deltarpm.html'
 license='BSD'>
This package contains tools to create and apply deltarpms. A deltarpm
contains the difference between an old and a new version of a rpm,
which makes it possible to recreate the new rpm from the deltarpm and
the old one. You don't have to have a copy of the old rpm, deltarpms
can also work with installed rpms.

Starting from version 2.2, there are also tools to handle ISO diffs.
</info><info fn="x11-driver-video-ati-6.13.99-0.20101217.1mdv2011.0.src"
 sourcerpm=''
 url='http://xorg.freedesktop.org'
 license='MIT'>
x11-driver-video-ati is the X.org driver for ATI Technologies.

Experimental support for Evergreen acceleration.
What's needed:
- "options radeon modeset=1" in /etc/modprobe.conf
- kernel &gt;= 2.6.36
- kernel with CONFIG_DRM_RADEON_KMS=y (aka tmb kernels)
Status:
- KMS works
</info><info fn="perl-URPM-4.4-1mdv2011.0.src"
 sourcerpm=''
 url='http://svn.mandriva.com/cgi-bin/viewvc.cgi/soft/rpm/perl-URPM/'
 license='GPLv2+ or Artistic'>
The URPM module allows you to manipulate rpm files, rpm header files and
hdlist files and manage them in memory.
</info><info fn="glibc-2.13-3.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.gnu.org/software/libc/'
 license='LGPL'>
The glibc package contains standard libraries which are used by
multiple programs on the system. In order to save disk space and
memory, as well as to make upgrading easier, common system code is
kept in one place and shared between programs. This particular package
contains the most important sets of shared libraries: the standard C
library and the standard math library. Without these two libraries, a
Linux system will not function.  The glibc package also contains
national language (locale) support.

This package now also provides ldconfig which was package seperately in
the past. Ldconfig is a basic system program which determines run-time
link bindings between ld.so and shared libraries. Ldconfig scans a running
system and sets up the symbolic links that are used to load shared
libraries properly. It also creates a cache (/etc/ld.so.cache) which
speeds the loading of programs which use shared libraries.
</info><info fn="blender-2.57-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.blender.org/'
 license='GPLv2+'>
Blender is the in-house software of a high quality animation studio.
It has proven to be an extremely fast and versatile design instrument.
The software has a personal touch, offering a unique approach to the
world of three dimensions. Blender can be used to create TV
commercials, to make technical visualizations or business graphics, to
do some morphing, or to design user interfaces. Developers can easily
build and manage complex environments. The renderer is versatile and
extremely fast. All basic animation principles (curves and keys) are
implemented.
</info><info fn="mfs-1.6.20-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.moosefs.org/'
 license='GPL v3'>
MooseFS is an Open Source, easy to deploy and maintain, distributed,
fault tolerant file system for POSIX compliant OSes.
</info><info fn="lvm2-2.02.85-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://sources.redhat.com/lvm2/'
 license='GPL'>
LVM includes all of the support for handling read/write operations on
physical volumes (hard disks, RAID-Systems, magneto optical, etc.,
multiple devices (MD), see mdadm(8) or even loop devices, see losetup(8)),
creating volume groups (kind of virtual disks) from one or more physical
volumes and creating one or more logical volumes (kind of logical partitions)
in volume groups.
</info><info fn="php-pear-HTTP_WebDAV_Server-1.0.0-0.RC6.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://pear.php.net/package/HTTP_WebDAV_Server/'
 license='PHP License'>
Mostly RFC2518 compliant helper class for WebDAV server
implementation.
</info><info fn="dansguardian-2.10.1.1-8.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.dansguardian.org'
 license='GPL'>
DansGuardian is a filtering proxy for Linux, FreeBSD, OpenBSD and Solaris.
It filters using multiple methods. These methods include URL and domain
filtering, content phrase filtering, PICS filtering, MIME filtering, file
extension filtering, POST filtering.

The content phrase filtering will check for pages that contain profanities
and phrases often associated with pornography and other undesirable content.
The POST filtering allows you to block or limit web upload.  The URL and
domain filtering is able to handle huge lists and is significantly faster
than squidGuard.

The filtering has configurable domain, user and ip exception lists.
SSL Tunneling is supported.
</info><info fn="firefox-l10n-6.0-0.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.firefox.com/'
 license='GPL'>
Localizations for Firefox web browser.
</info><info fn="firefox-6.0-0.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.firefox.com/'
 license='MPLv1+'>
Mozilla Firefox is a web browser
</info><info fn="mozilla-thunderbird-6.0-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.mozillamessaging.com/'
 license='MPL'>
Mozilla Thunderbird is a full-featured email, RSS and newsgroup client that
makes emailing safer, faster and easier than ever before.
</info><info fn="indexhtml-2011.0-3.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://start.mandriva.com/'
 license='GPL'>
Mandriva Linux index.html welcome page displayed by web browsers
when they are launched, first mail displayed on mail clients
after installation and "about" information.
</info><info fn="kdeutils4-4.6.5-2.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://utils.kde.org/'
 license='GPL'>
The KDE Utilities are a compilation of various desktop utilities.
</info><info fn="autofs-5.0.6-2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='ftp://ftp.kernel.org/pub/linux/daemons/autofs'
 license='GPL'>
autofs is a daemon which automatically mounts filesystems when you use
them, and unmounts them later when you are not using them.  This can
include network filesystems, CD-ROMs, floppies, and so forth.
</info><info fn="virtuoso-opensource-6.1.3-1.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://virtuoso.openlinksw.com/'
 license='GPLv2'>
Virtuoso is a scalable cross-platform server that combines SQL/RDF/XML
Data Management with Web Application Server and Web Services Platform
functionality.

Virtuoso is at the core a high performance object-relational SQL
database. As a database, it provides transactions, a smart SQL
compiler, powerful stored procedure language with optional Java and
.Net server side hosting, hot backup, SQL 99 and more. It has all
major data access interfaces, as in ODBC, JDBC, ADO .Net and OLE/DB.

Virtuoso has a built-in web server which can serve dynamic web pages
written in Virtuoso's web page language as well as PHP, ASP .Net and
others. This same web server provides SOAP and REST access to Virtuoso
stored procedures, supporting a broad set of WS protocols such as
WS-Security, WS-Reliable Messaging and others. A BPEL4WS run time is
also available as part of Virtuoso's SOA suite.
</info><info fn="f-spot-0.8.2-4.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://f-spot.org'
 license='GPLv2+'>
F-Spot is a full-featured personal photo management application
for the GNOME desktop.

Features:
* Simple user interface
* Photo editor
* Color adjustments
* Tag icon editor
* Create photo cd
* Export to web
</info><info fn="b43-fwcutter-015-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://linuxwireless.org/en/users/Drivers/b43'
 license='BSD'>
Fwcutter allows you to extract the firmware required for Broadcom 43xx chips
out of the .o files available with the card or on the Internet.

Not all versions of the firmwares are supported by this tool.
You can list supported firmwares with :
b43-fwcutter -l

Depending on your chip, you will need a version 3 or 4 firmware.

Useful reading and links to firmwares that can be extracted are available at
http://linuxwireless.org/en/users/Drivers/b43

Extract (as root) with :
b43-fwcutter -w /lib/firmware wl_apsta_mimo.o OR
b43-fwcutter -w /lib/firmware wl_apsta.o (for LP-PHY cards like BCM4312 only!)

It will create files directly at the required place (in either b43legacy or
b43 subdirectory).
</info><info fn="laptop-mode-tools-1.57-3.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.samwel.tk/laptop_mode/laptop_mode'
 license='GPLv2+'>
Userland scripts to control "laptop mode". Laptop mode is a Linux
kernel feature that allows your laptop to save considerable power, by
allowing the hard drive to spin down for longer periods of time. This
package contains the userland scripts that are needed to enable laptop
mode.
</info><info fn="shorewall-4.4.19.4-0.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.shorewall.net/'
 license='GPLv2+'>
The Shoreline Firewall, more commonly known as "Shorewall", is a Netfilter
(iptables) based firewall that can be used on a dedicated firewall system,
a multi-function gateway/ router/server or on a standalone GNU/Linux system.
</info><info fn="lm_sensors-3.3.1-9.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.lm-sensors.org'
 license='LGPLv2+'>
This package contains a collection of user space tools for general SMBus
access and hardware monitoring. SMBus, also known as System Management Bus,
is a protocol for communicating through a I2C ('I squared C') bus. Many modern
mainboards have a System Management Bus. There are a lot of devices which can
be connected to a SMBus; the most notable are modern memory chips with EEPROM
memories and chips for hardware monitoring.

Most modern mainboards incorporate some form of hardware monitoring chips.
These chips read things like chip temperatures, fan rotation speeds and
voltage levels. There are quite a few different chips which can be used
by mainboard builders for approximately the same results.
</info><info fn="gcc4.2-4.2.3-9.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://gcc.gnu.org/'
 license='GPLv3+'>
A compiler aimed at integrating all the optimizations and features
necessary for a high-performance and stable development environment.
This package is required for all other GCC compilers, namely C++,
Fortran 95, Objective C, Java and Ada 95.
</info><info fn="draksnapshot-0.20.4-2.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.mandrivalinux.com'
 license='GPL'>
This is a backup program that uses rsync to take backup snapshots of
filesystems.  It uses hard links to save space on disk.
</info><info fn="qemu-0.15.0-1.0.2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://wiki.qemu.org/Main_Page'
 license='GPL'>
QEMU is a FAST! processor emulator. By using dynamic translation it
achieves a reasonnable speed while being easy to port on new host
CPUs. QEMU has two operating modes:

* User mode emulation. In this mode, QEMU can launch Linux processes
  compiled for one CPU on another CPU. Linux system calls are
  converted because of endianness and 32/64 bit mismatches. Wine
  (Windows emulation) and DOSEMU (DOS emulation) are the main targets
  for QEMU.

* Full system emulation. In this mode, QEMU emulates a full system,
  including a processor and various peripherials. Currently, it is
  only used to launch an x86 Linux kernel on an x86 Linux system. It
  enables easier testing and debugging of system code. It can also be
  used to provide virtual hosting of several virtual PC on a single
  server.
</info><info fn="sqlite3-3.7.7.1-0.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.sqlite.org/'
 license='Public Domain'>
SQLite is a C library that implements an embeddable SQL database
engine. Programs that link with the SQLite library can have SQL
database access without running a separate RDBMS process. The
distribution comes with a standalone command-line access program
(sqlite) that can be used to administer an SQLite database and
which serves as an example of how to use the SQLite library.
</info><info fn="coreutils-8.12-1.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.gnu.org/software/coreutils/'
 license='GPLv3+'>
This package is the union of the old GNU fileutils, sh-utils, and
textutils packages.

These tools are the GNU versions of common useful and popular
file &amp; text utilities which are used for:
- file management
- shell scripts
- modifying text file (spliting, joining, comparing, modifying, ...)

Most of these programs have significant advantages over their Unix
counterparts, such as greater speed, additional options, and fewer
arbitrary limits.
</info><info fn="gaupol-0.18-1.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://home.gna.org/gaupol/'
 license='GPLv3+'>
Editor for text-based subtitle files. It supports multiple subtitle file
formats and provides means of correcting texts and timing subtitles to match
video. The user interface is designed with attention to batch processing of
multiple documents and convenience of translating.
</info><info fn="vobject-0.7.1-3.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://vobject.skyhouseconsulting.com'
 license='ASL 1.1'>
vobject is intended to be a full featured Python package for parsing
and generating vCard and vCalendar files.

Currently, iCalendar files are supported and well tested. vCard 3.0
files are supported, and all data should be imported, but only a few
components are understood in a sophisticated way.
</info><info fn="python-translate-1.9.0-0.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://translate.sourceforge.net/'
 license='GPLv2+'>
The Translate Toolkit is a set of software and documentation designed
to help make the lives of localizers both more productive and less
frustrating.  The Toolkit is part of the translate.sourceforge.net
project, hosted at http://translate.sourceforge.net/

The software includes programs to covert localization formats to the
common PO format and programs to check and manage PO files.  The
documentation includes guides on using the tools, running a
localization project and how to localize various projects from
OpenOffice.org to Mozilla.

At its core the software contains a set of classes for handling
various localization storage formats: DTD, properties, OpenOffice.org
GSI/SDF, CSV and of course PO.  And scripts to convert between these
formats.

Also part of the Toolkit are Python programs to create word counts,
merge translations and perform various checks on PO files.
</info><info fn="libtextcat-2.2-8.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://software.wise-guys.nl/libtextcat'
 license='BSD'>
Libtextcat is a library with functions that implement the classification
technique described in Cavnar &amp; Trenkle, "N-Gram-Based Text Categorization".
It was primarily developed for language guessing, a task on which it is known
to perform with near-perfect accuracy.
</info><info fn="python-levenshtein-0.10.1-2.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://translate.sourceforge.net/'
 license='GPLv2+'>
The Levenshtein Python C extension module contains functions for fast
computation of
- Levenshtein (edit) distance, and edit operations
- string similarity
- approximate median strings, and generally string averaging
- string sequence and set similarity
It supports both normal and Unicode strings.
</info><info fn="python-enchant-1.5.3-2.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.rfk.id.au/software/pyenchant/'
 license='LGPL'>
PyEnchant is a spellchecking library for Python, based on the Enchant
library by Dom Lachowicz.
</info><info fn="file-5.09-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.darwinsys.com/file/'
 license='BSD'>
The file command is used to identify a particular file according to the
type of data contained by the file.  File can identify many different
file types, including ELF binaries, system libraries, RPM packages, and
different graphics formats.

You should install the file package, since the file command is such a
useful utility.
</info><info fn="dev86-0.16.18-2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://homepage.ntlworld.com/robert.debath/'
 license='GPLv2'>
The dev86 package provides an assembler and linker for real mode 80x86
instructions. You'll need to have this package installed in order to
build programs that run in real mode, including LILO and the kernel's
bootstrapping code, from their sources.

You should install dev86 if you intend to build programs that run in real
mode from their source code.
</info><info fn="hostapd-0.7.3-2.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://hostap.epitest.fi/hostapd/'
 license='GPL'>
Hostapd is an optional user space component for Host AP driver. It adds
more features to the basic IEEE 802.11 management included in the kernel
driver: using external RADIUS authentication server for MAC address
based access control, IEEE 802.1X Authenticator and dynamic WEP keying,
RADIUS accounting.
</info><info fn="webkit-1.4.2-0.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.webkitgtk.org'
 license='BSD and LGPLv2+'>
WebKit is an open source web browser engine.
</info><info fn="openbox-3.5.0-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://openbox.org/'
 license='BSD'>
Openbox is a window manager for the X11 windowing system.
It currently runs on a large list of platforms. It was originally
based on blackbox and currently remains very similar, even using
blackbox styles (with available extensions) for its themeing.

Openbox is the spawn of a number of previous blackbox users/hackers.
Being overall pleased with the window manager, but feeling left unable
to contribute, this project was born.The Openbox project is developed,
maintained, and contributed to by these individuals.
</info><info fn="drakx-net-0.93-7.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://wiki.mandriva.com/en/Tools'
 license='GPL'>
This package contains the Mandriva network tools.

net_applet: applet to check network connection
</info><info fn="drakxtools-13.51-13.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://wiki.mandriva.com/en/Development/Docs/drakxtools_dev'
 license='GPLv2+'>
Contains many Mandriva Linux applications simplifying users and
administrators life on a Mandriva Linux machine. Nearly all of
them work both under XFree (graphical environment) and in console
(text environment), allowing easy distant work.

- drakbug: interactive bug report tool
- drakbug_report: help find bugs in DrakX
- drakclock: date &amp; time configurator
- drakfloppy: boot disk creator
- drakfont: import fonts in the system
- draklog: show extracted information from the system logs
- draksec: security options managment
</info><info fn="squidguard-1.4-15.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.squidguard.org'
 license='GPL'>
SquidGuard is a combined filter, redirector and access controller plugin for
Squid. It is free, very flexible, extremely fast, easily installed, portable.
SquidGuard can be used to
- limit the web access for some users to a list of accepted/well known web
servers and/or URLs only.
- block access to some listed or blacklisted web servers and/or URLs for
some users.
- block access to URLs matching a list of regular expressions or words for
some users.
- enforce the use of domainnames/prohibit the use of IP address in URLs.
- redirect blocked URLs to an "intelligent" CGI based info page.
- redirect unregistered user to a registration form.
- redirect popular downloads like Netscape, MSIE etc. to local copies.
- redirect banners to an empty GIF.
- have different access rules based on time of day, day of the week, date
etc.
- have different rules for different user groups.

Neither squidGuard nor Squid can be used to

- filter/censor/edit text inside documents
- filter/censor/edit embeded scripting languages
  like JavaScript or VBscript inside HTML
</info><info fn="florence-0.5.1-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://florence.sourceforge.net'
 license='GPLv2+ and GFDL'>
Florence is an extensible scalable virtual keyboard.

It's designed for GNOME but can be used in any DE (without some features).

You need it if you can't use a real hardware keyboard, for
example because you are disabled, your keyboard is broken or
because you use a tablet PC, but you must be able to use a pointing
device (as a mouse, a trackball or a touchscreen).

In GNOME Florence stays out of your way when you don't need it:
it appears on the screen only when you need it.

A Timer-based auto-click functionality is available
to help disabled people having difficulties to click.

If you have problems switching keyboard layout (language) in KDE4,
reconfigure layouts in KDE4 settings once and it should work.
</info><info fn="subversion-1.7.0-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://subversion.apache.org/'
 license='BSD CC2.0'>
Subversion (SVN) is a concurrent version control system which enables one or
more users to collaborate in developing and maintaining a hierarchy of files
and directories while keeping a history of all changes.  Subversion only stores
the differences between versions, instead of every complete file.  Subversion
also keeps a log of who, when, and why changes occured.

As such it basically does the same thing CVS does (Concurrent Versioning
System) but has major enhancements compared to CVS and fixes a lot of the
annoyances that CVS users face.

This package contains the client, if you're looking for the server end
of things you want subversion-repos.
</info><info fn="mc-4.8.0-2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.midnight-commander.org/'
 license='GPLv2+'>
Midnight Commander is a visual shell much like a file manager, only with way
more features.  It is text mode, but also includes mouse support if you are
running GPM.  Its coolest feature is the ability to ftp, view tar, zip
files, and poke into RPMs for specific files.
</info><info fn="linux-userspace-headers-2.6.39.4-3.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.kernel.org/'
 license='GPL'>
C header files from the Linux kernel. The header files define structures
and constants that are needed for building most standard programs.

This package is not suitable for building kernel modules.
</info><info fn="smplayer-0.6.9-6.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://smplayer.sourceforge.net'
 license='GPLv2+'>
SMPlayer intends to be a complete front-end for MPlayer,
from basic features like playing videos, DVDs, and VCDs
to more advanced features like support for MPlayer filters and more.

One of the most interesting features of SMPlayer: it remembers the
settings of all files you play. So you start to watch a movie but you
have to leave... don't worry, when you open that movie again it will
resume at the same point you left it, and with the same settings:
audio track, subtitles, volume...

Other additional interesting features:

* New GUI. Now there are toolbars, the control at the bottom is different
  (and it changes if the window is made smaller), the icons can be changed
  (several icon themes are available). In fullscreen mode the floating
  control that appears when you move the mouse to the bottom of the screen
  is new too and this time the video doesn't resize when it shows.
* Configurable key shortcuts. A shortcut editor has been added, it's
  located at "Preferences-&gt;Mouse &amp; keyboard". Please read
  Configurable_shortcuts.txt.
* Support for VCD. Now you can also play VCD discs.
* System tray icon. Now it's possible to leave SMPlayer running in the
  system tray. This feature requires Qt 4.2.
* Added some new functions, like pan&amp;scan, stay on top, set the size
  of the window...
* Improved support for subtitles. For instance, now you can load a idx/sub
  file and you'll be able to select among all languages that the file
  provides. You can have a mkv file with embedded subtitles, load an
  idx/sub file (or srt, sub...) and all subtitles will be available.
* New translations. SMPlayer 0.5.0 is translated (totally or partially) to
  the following languages: Bulgarian, Czech, German, Spanish, French,
  Hungarian, Italian, Japanese, Georgian, Dutch, Polish, Brazilian Portuguese,
  Russian, Slovak, Serbian, Swedish, Turkish, Ukrainian, Simplified-Chinese
  and Traditional Chinese. By the way, now it's possible to change the language
  at run-time.

SMPlayer supports themes which can be found in smplayer-themes package.
</info><info fn="kdegames4-4.6.5-1.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://games.kde.org/'
 license='GPL'>
Games for the K Desktop Environment.
This is a compilation of various games for KDE project
 - katomic: build complex atoms with a minimal amount of moves
 - kbattleship: battleship game with built-in game server
 - kblackbox: find atoms in a grid by shooting electrons
 - kbounce: claim areas and don't get disturbed
 - klines: place 5 equal pieces together, but wait, there are 3 new ones
 - mahjongg: a tile laying patience
 - kmines: the classical mine sweeper
 - kolf: a golf game
 - konquest: conquer the planets of your enemy
 - kpat: several patience card games
 - kreversi: the old reversi board game, also known as othello
 - kshisen: patience game where you take away all pieces
 - kspaceduel: two player game with shooting spaceships flying around a sun
 - ktuberling: kids game: make your own potato (NO french fries!)
 - kfourinline: place 4 pieces in a row
 - Lskat: lieutnant skat
 - Ksudoku: Play, create and solve sudoku grids
 - KGoldrunner: a game of action and puzzle solving.
 - KTuberling: "potato editor" game
 - Kiriki: Close of Yahtzee
 - Kjumpingcube: a tactical game for number-crunchers
 - Bovo: classic pen and paper game
 - KSquares: an implementation of the popular paper based game squares
 - Knetwalk: Turn the board pieces to get all computers connected
</info><info fn="graphite2-1.0.3-0.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://sourceforge.net/projects/silgraphite/'
 license='LGPLv2+'>
Graphite2 is a project within SIL's Non-Roman Script Initiative and Language
Software Development groups to provide rendering capabilities for complex
non-Roman writing systems. Graphite can be used to create "smart fonts" capable
of displaying writing systems with various complex behaviors. With respect to
the Text Encoding Model, Graphite handles the "Rendering" aspect of writing
system implementation.
</info><info fn="lxpanel-0.5.8-4.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://lxde.sourceforge.net/'
 license='GPLv2+'>
LXPanel is a lightweight X11 desktop panel contains:
1. User-friendly application menu automatically generated from *.desktop
   files on the system.
2. Launcher bar (Small icons clicked to launch apps)
3. Task bar supporting urgency hint (Can flash when gaim gets new
   incoming messages)
4. Notification area (System tray)
5. Digital clock
6. Run dialog (A dialog let you type a command and run, can be called in
   external programs)
7. Volume control plug-in (optional, written by jserv)
8. lxpanelctl, an external controller let you control lxpanel in other
   programs.
</info><info fn="kernel-2.6.39.4-4.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://wiki.mandriva.com/en/Manbo_Core2_kernel'
 license='GPLv2'>
The kernel package contains the Linux kernel (vmlinuz), the core of
your Manbo Linux operating system. The kernel handles the basic
functions of the operating system: memory allocation, process
allocation, device input and output, etc.

For instructions for update, see:
http://www.mandriva.com/en/security/kernelupdate
</info><info fn="kernel-source-2.6.39.4-4.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.kernel.org'
 license='GPL v2'>
This package provides the whole kernel source files.
</info><info fn="kernel-server-2.6.39.4-4.2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.kernel.org'
 license='GPLv2'>
The Linux Kernel, the operating system core itself
</info><info fn="kernel-desktop-2.6.39.4-4.2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.kernel.org'
 license='GPLv2'>
The Linux Kernel, the operating system core itself
</info><info fn="kernel-generic-2.6.39.4-4.2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.kernel.org'
 license='GPLv2'>
The Linux Kernel, the operating system core itself
</info><info fn="msec-0.80.10-4.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.mandrivalinux.com/'
 license='GPLv2+'>
The Mandriva Linux Security package is designed to provide security features to
the Mandriva Linux users. It allows to select from a set of preconfigured
security levels, and supports custom permission settings, user-specified
levels, and several security utilities.  This packages includes main msec
application and several programs that will be run periodically in order to test
the security of your system and alert you if needed.
</info><info fn="tesseract-3.00-1.0.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://code.google.com/p/tesseract-ocr/'
 license='Apache'>
The Tesseract OCR engine was one of the top 3 engines in the 1995
UNLV Accuracy test. Since then it has had little work done on it,
but it is probably one of the most accurate open source OCR engines
available. The source code will read a binary, grey or color image
and output text. A tiff reader is built in that will read
uncompressed TIFF images, or libtiff can be added to read compressed
images.
</info><info fn="kdeadmin4-4.6.5-1.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.kde.org'
 license='GPL'>
The kdeadmin package contains packages that usually only a system
administrator might need:
	- kcron
    		Editor for the cron command scheduler.
	- kuser
   		An user manager.
</info><info fn="kernel-headers-2.6.39.4-4.2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.kernel.org'
 license='GPL v2'>
C header files from the Linux kernel. The header files define
structures and constants that are needed for building most
standard programs, notably the C library.

This package is not suitable for building kernel modules, you
should use the 'kernel-devel' package instead.
</info><info fn="python-sip-4.13-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.riverbankcomputing.co.uk/software/sip/intro'
 license='GPLv2+'>
SIP is a tool that makes it very easy to create Python bindings for C and C++ libraries. It was
originally developed to create PyQt, the Python bindings for the Qt toolkit, but can be used to
create bindings for any C or C++ library.
</info><info fn="shotwell-0.11.6-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.yorba.org/shotwell/'
 license='LGPLv2+ and CC-BY-SA'>
Shotwell is a digital photo organizer designed for the GNOME desktop
environment. It allows you to import photos from disk or camera,
organize them in various ways, view them in full-window or fullscreen
mode, and export them to share with others.
</info><info fn="potrace-1.10-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://potrace.sourceforge.net/'
 license='GPLv2'>
potrace is a utility for tracing a bitmap, which means, transforming
a bitmap into a smooth, scalable image. The input is a bitmap (PBM,
PGM, PPM, or BMP format), and the output can be EPS (default),
Postscript, SVG ou PGM (for easy antialiasing). A typical use is to
create EPS files from scanned data, such as company or university logos,
handwritten notes, etc. The resulting image is not "jaggy" like a bitmap,
but smooth. It can then be rendered at any resolution.
</info><info fn="asciidoc-8.6.6-2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.methods.co.nz/asciidoc/'
 license='GPLv2+'>
AsciiDoc is a text document format for writing short documents, articles,
books and UNIX man pages.
</info><info fn="draklive-install-1.31-15.src"
 distepoch='2011.0'
 sourcerpm=''
 url='https://svn.mandriva.com/svn/soft/drakx/trunk/live/draklive-install/'
 license='GPL'>
This tool allows to install Mandriva from a running live system.
</info><info fn="testdisk-6.13-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.cgsecurity.org/wiki/TestDisk'
 license='GPLv2+'>
Tool to check and undelete partition. Works with the following
filesystems:
    * BeFS ( BeOS )
    * BSD disklabel ( FreeBSD/OpenBSD/NetBSD )
    * CramFS, Compressed File System
    * DOS/Windows FAT12, FAT16 and FAT32
    * HFS and HFS+, Hierarchical File System
    * JFS, IBM's Journaled File System
    * Linux Ext2 and Ext3
    * Linux Raid
          o RAID 1: mirroring
          o RAID 4: striped array with parity device
          o RAID 5: striped array with distributed parity information
          o RAID 6: striped array with distributed dual redundancy information
    * Linux Swap (versions 1 and 2)
    * LVM and LVM2, Linux Logical Volume Manager
    * Mac partition map
    * Novell Storage Services NSS
    * NTFS ( Windows NT/2K/XP/2003/Vista )
    * ReiserFS 3.5, 3.6 and 4
    * Sun Solaris i386 disklabel
    * Unix File System UFS and UFS2 (Sun/BSD/...)
    * XFS, SGI's Journaled File System
</info><info fn="sphere-client-rosa-1-8.src"
 distepoch='2011.0'
 sourcerpm=''
 url=''
 license='GPLv3'>
sphere-client-rosa
</info><info fn="ldetect-lst-0.1.292-1.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://svn.mandriva.com/cgi-bin/viewvc.cgi/soft/ldetect-lst/trunk/'
 license='GPLv2+'>
The hardware device lists provided by this package are used as lookup
table to get hardware autodetection.
</info><info fn="man-pages-zh-1.5-10.src"
 distepoch='2011.0'
 sourcerpm=''
 url=''
 license='FDL'>
Set of man pages translated into Chinese language
</info><info fn="hplip-3.11.10-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://hplip.sourceforge.net/'
 license='GPLv2+ and MIT'>
This is the HP driver package to supply Linux support for most
Hewlett-Packard DeskJet, LaserJet, PSC, OfficeJet, and PhotoSmart
printers and all-in-one peripherals (also known as Multi-Function
Peripherals or MFPs), which can print, scan, copy, fax, and/or access
flash memory cards.

It is work in progress, but printing, scanning, memory card access,
ink/toner/battery/consumable level checking, and inkjet printer
maintenance are supported on most models, when either connected to the
USB or LAN (built-in interfaces or selected HP JetDirect models) on a
Linux workstation with CUPS printing system.

For status and consumable checking and also for inkjet maintenance
there is the graphical tool "hp-toolbox" available (Menu:
"System"/"Monitoring"/"HP Printer Toolbox").
</info><info fn="libtheora-1.1.1-4.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.theora.org/'
 license='BSD'>
Ogg Theora is a fully open, non-proprietary, patent-and-royalty-free,
general-purpose compressed video format.
</info><info fn="hwloc-1.3-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.open-mpi.org/'
 license='BSD'>
The Portable Hardware Locality (hwloc) software package provides a portable
abstraction (across OS, versions, architectures, ...) of the hierarchical
topology of modern architectures, including NUMA memory nodes, sockets, shared
caches, cores and simultaneous multithreading. It also gathers various system
attributes such as cache and memory information. It primarily aims at helping
applications with gathering information about modern computing hardware so as
to exploit it accordingly and efficiently.
</info><info fn="yasm-1.2.0-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.tortall.net/projects/yasm/'
 license='BSD'>
Yasm is a complete rewrite of the NASM assembler under the "new" BSD
License (some portions are under other licenses, see COPYING for
details). It is designed from the ground up to allow for multiple
assembler syntaxes to be supported (eg, NASM, TASM, GAS, etc.) in
addition to multiple output object formats and even multiple
instruction sets. Another primary module of the overall design is an
optimizer module.
</info><info fn="plasma-applet-stackfolder-0.1.9-13.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.rosalab.ru'
 license='GPL'>
Browse the stack of folders
</info><info fn="psmisc-22.13-3.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://psmisc.sourceforge.net/'
 license='GPLv2+'>
The psmisc package contains utilities for managing processes on your
system: pstree, killall and fuser.  The pstree command displays a tree
structure of all of the running processes on your system.  The killall
command sends a specified signal (SIGTERM if nothing is specified) to
processes identified by name.  The fuser command identifies the PIDs
of processes that are using specified files or filesystems.
</info><info fn="python-httplib2-0.7.2-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://code.google.com/p/httplib2'
 license='MIT'>
A comprehensive HTTP client library that supports many features left
out of other HTTP libraries.
</info><info fn="python-lxml-2.3.2-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://codespeak.net/lxml/'
 license='BSD'>
lxml is a Pythonic binding for the libxml2 and libxslt libraries. It follows
the ElementTree API as much as possible, building it on top of the native
libxml2 tree. It also extends this API to expose libxml2 and libxslt specific
functionality, such as XPath, Relax NG, XML Schema, XSLT, and c14n.
</info><info fn="python-2.7.2-2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.python.org/'
 license='Modified CNRI Open Source License'>
Python is an interpreted, interactive, object-oriented programming
language often compared to Tcl, Perl, Scheme or Java. Python includes
modules, classes, exceptions, very high level dynamic data types and
dynamic typing. Python supports interfaces to many system calls and
libraries, as well as to various windowing systems (X11, Motif, Tk,
Mac and MFC).

Programmers can write new built-in modules for Python in C or C++.
Python can be used as an extension language for applications that
need a programmable interface. This package contains most of the
standard Python modules, as well as modules for interfacing to the
Tix widget set for Tk and RPM.

Note that documentation for Python is provided in the python-docs
package.
</info><info fn="jhead-2.93-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.sentex.net/~mwandel/jhead/'
 license='Public Domain'>
Most digital cameras produce EXIF files, which are JPEG files with extra tags
that contain information about the image.

In contrary to the tools "exif" and "gexif" (and all other libexif-based tools
as "gphoto2") this tool gives a much easier readable summary of camera settings
(shutter speed in 1/x sec, focal length (also the 35-mm camera equivalent),
focal distance, ...), EXIF header manipulation as stripping off the thumbnail
and other info not needed, stripping off the complete header, applying
arbitrary conversion tools to the JPEG image and conserving the header,
renaming JPEG images with the capture date stored in the header, and even
turning the images upright when the camera has an orientation sensor (as Canon
Digital IXUS 400) ...

The tool is very compact, the executable has only a size of around 35 kb, the
whole package (with documentation) occupies 60 kb.

See /usr/share/doc/jhead/usage.html for how to use this program.
</info><info fn="sound-scripts-0.61-3.2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.mandrivalinux.com/cgi-bin/cvsweb.cgi/soft/sound-scripts/'
 license='GPL'>
The sound-scripts package contains the basic system scripts used:
- to setup default sound mixer on first boot
- save sound mixer level on shutdown
- restore sound mixer on bootstrapping
</info><info fn="libreoffice-3.4.3-2.5.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.libreoffice.org'
 license='LGPL'>
LibreOffice is an Open Source, community-developed, multi-platform
office productivity suite. It includes the key desktop applications,
such as a word processor, spreadsheet, presentation manager, formula
editing and drawing program, with a user interface and feature set
similar to other office suites. Sophisticated and flexible,
LibreOffice also works transparently with a variety of file
formats, including Microsoft Office.
</info><info fn="drakconf-12.19.2-2.2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://wiki.mandriva.com/en/ControlCenter'
 license='GPLv2+'>
drakconf includes the Mandriva Linux Control Center which is an interface to
multiple utilities from DrakXtools.
</info><info fn="psyncclient-0.1-30.src"
 distepoch='2011.0'
 sourcerpm=''
 url=''
 license='GPLv2'>
MandrivaSync client
</info><info fn="rosapanel-1.0-23.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://rosalab.ru/'
 license='LGPL v2'>
ROSA panel
</info><info fn="rpm-5.3.12-0.20110712.2.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://rpm5.org/'
 license='LGPLv2.1+'>
RPM is a powerful command line driven package management system capable of
installing, uninstalling, verifying, querying, and updating software packages.
Each software package consists of an archive of files along with information
about the package like its version, a description, etc.
</info><info fn="rosa-icons-1.0.11-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url=''
 license='GPLv2'>
ROSA icons theme. Designed for Mandriva. Based on the original icon theme Elementary by Daniel Fore (Dan Rabbit).
</info><info fn="mandriva-lxde-config-0.5.2-10.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.lxde.org'
 license='GPLv2+'>
Configuration files for Mandriva LXDE desktop environment.
</info><info fn="kdepim4-runtime-4.6.1-1.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://community.kde.org/KDE_PIM'
 license='GPL'>
Information Management applications for the K Desktop Environment runtime libs.
</info><info fn="kdegraphics4-4.6.5-4.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.kde.org'
 license='GPL'>
Graphical tools for the K Desktop Environment.
kdegraphics is a collection of graphic oriented applications
</info><info fn="kdebase4-runtime-4.6.5-9.4.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.kde.org'
 license='GPL'>
KDE 4 application runtime components.
</info><info fn="timezone-2011n-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url=''
 license='GPL'>
This package contains data files with rules for various timezones
around the world.
</info><info fn="libmsn-4.1-6.3.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://sourceforge.net/projects/libmsn'
 license='GPLv2+'>
Libmsn is a reusable, open-source, fully documented library for
connecting to Microsoft's MSN Messenger service.
</info><info fn="kdebase4-workspace-4.6.5-8.4.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.kde.org'
 license='GPL'>
This package contains the KDE 4 application workspace components.
</info><info fn="man-pages-ru-0.98-11.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.linuxshare.ru/projects/trans/mans.html'
 license='Distributable'>
A large collection of man pages (reference material) from the Linux
Documentation Project (LDP), translated to Russian.
</info><info fn="kdenlive-0.8-2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.kdenlive.org/'
 license='GPLv2+'>
Kdenlive is a non-linear video editor for KDE. It relies on a separate
renderer, piave, to handle it's rendering. Kdenlive supports multitrack
editing.
</info><info fn="scribus-1.4.0-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.scribus.net/'
 license='GPLv2+'>
Scribus is a desktop open source page layout program with the aim of
producing commerical grade output in PDF and Postscript, primarily,
though not exclusively, for Linux.

While the goals of the program are ease of use and simple
easy-to-understand tools, Scribus offers support for professional
publishing features, such as CMYK colors, easy PDF creation,
Encapsulated Postscript import and export, and creation of color
separations.
</info><info fn="libpcap-1.2.1-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.tcpdump.org/'
 license='BSD'>
Libpcap provides a portable framework for low-level network monitoring. Libpcap
can provide network statistics collection, security monitoring and network
debugging.  Since almost every system vendor provides a different interface for
packet capture, the libpcap authors created this system-independent API to ease
in porting and to alleviate the need for several system-dependent packet
capture modules in each application.
</info><info fn="smartmontools-5.41-1.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://smartmontools.sourceforge.net/'
 license='GPLv2'>
SMARTmontools controls and monitors storage devices using the Self-Monitoring,
Analysis and Reporting Technology System (S.M.A.R.T.) built into ATA and SCSI
Hard Drives. This is used to check the reliability of the hard drive and
predict drive failures. The suite contains two utilities. The first, smartctl,
is a command-line utility designed to perform simple S.M.A.R.T. tasks. The
second, smartd, is a daemon that periodically monitors smart status and
reports errors to syslog. The package is compatible with the ATA/ATAPI-5
specification. Future releases will be compatible with the ATA/ATAPI-6 and
ATA/ATAPI-7 specifications. The package is intended to incorporate as much
"vendor specific" and "reserved" information as possible about disk drives.
man smartctl and man smartd will provide more information.
</info><info fn="libktorrent-1.1.1-2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://ktorrent.org/'
 license='GPLv2+'>
KTorrent is a BitTorrent program for KDE. It's main features are:
 o Downloads torrent files
 o Upload speed capping, seeing that most people can't upload
   infinite amounts of data.
 o Internet searching using  The Bittorrent website's search engine
 o UDP Trackers
</info><info fn="ktorrent-4.1.1-3.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://ktorrent.org/'
 license='GPLv2+'>
KTorrent is a BitTorrent program for KDE. Its main features are:
 o Downloads torrent files
 o Upload speed capping, seeing that most people can't upload
   infinite amounts of data.
 o Internet searching using  The Bittorrent website's search engine
 o UDP Trackers
</info><info fn="dkms-2.0.19-27.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://linux.dell.com/dkms'
 license='GPL'>
This package contains the framework for the Dynamic
Kernel Module Support (DKMS) method for installing
module RPMS as originally developed by the Dell
Computer Corporation.

This package is intended for building binary kernel
modules with dkms source packages installed
</info><info fn="choqok-1.1-3.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://choqok.gnufolks.org/'
 license='GPLv3'>
Choqok is a Free/Open Source micro-blogging client for K Desktop
</info><info fn="polkit-kde-agent-1-0.99.0-4.src"
 distepoch='2011.0'
 sourcerpm=''
 url='https://projects.kde.org/projects/extragear/base/polkit-kde-agent-1'
 license='GPL'>
PolicyKit authentication agent for KDE
</info><info fn="samba-3.5.12-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.samba.org'
 license='GPLv3'>
Samba provides an SMB server which can be used to provide
network services to SMB (sometimes called "Lan Manager")
clients, including various versions of MS Windows, OS/2,
and other Linux machines. Samba also provides some SMB
clients, which complement the built-in SMB filesystem
in Linux. Samba uses NetBIOS over TCP/IP (NetBT) protocols
and does NOT need NetBEUI (Microsoft Raw NetBIOS frame)
protocol.

Samba-3.0 features working NT Domain Control capability and
includes the SWAT (Samba Web Administration Tool) that
allows samba's smb.conf file to be remotely managed using your
favourite web browser. For the time being this is being
enabled on TCP port 901 via xinetd. SWAT is now included in
it's own subpackage, samba-swat.

Please refer to the WHATSNEW.txt document for fixup information.
This binary release includes encrypted password support.

Please read the smb.conf file and ENCRYPTION.txt in the
docs directory for implementation details.
</info><info fn="plasma-wallpaper-timeoftheday-0.1-8.src"
 distepoch='2011.0'
 sourcerpm=''
 url=''
 license='GPL'>
A Plasma Wallpaper that changes wallpaper based on day hour
</info><info fn="xdg-user-dirs-gtk-0.8-12.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.gnome.org/'
 license='GPLv2+'>
xdg-user-dirs-gtk is a companion to xdg-user-dirs that integrates it into
the Gnome desktop and Gtk+ applications.

It gets run during login and does two things:
* Tracks changes of locale and prompts the user so the directories
  can be changed.
* Creates a default gtk bookmarks file if there is none, based
  on a set of xdg user dirs.
</info><info fn="rosa-launcher-0.34.8-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.rosalab.ru/'
 license='GPLv3'>
ROSA Desktop Application Launcher
</info><info fn="urpmi-6.68-6.2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://wiki.mandriva.com/en/Tools/urpmi'
 license='GPLv2+'>
urpmi is Mandriva Linux's console-based software installation tool. You can
use it to install software from the console in the same way as you use the
graphical Install Software tool (rpmdrake) to install software from the
desktop. urpmi will follow package dependencies -- in other words, it will
install all the other software required by the software you ask it to
install -- and it's capable of obtaining packages from a variety of media,
including the Mandriva Linux installation CD-ROMs, your local hard disk,
and remote sources such as web or FTP sites.
</info><info fn="qt4-4.7.4-2.5.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://qt.nokia.com/'
 license='LGPLv2 with exceptions or GPLv3 with exceptions'>
Qt is a GUI software toolkit which simplifies the task of writing and
maintaining GUI (Graphical User Interface) applications for the X
Window System. Qt is written in C++ and is fully object-oriented.

This package contains the shared library needed to run Qt
applications, as well as the README files for Qt.
</info><info fn="plasma-applet-yawp-0.3.6-3.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.kde-look.org/content/show.php?content=94106'
 license='GPLv2+'>
Yet Another Weather Plasmoid
Plasma applet that allow to see the weather.
</info><info fn="kdenetwork4-4.6.5-2.2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.kde.org'
 license='GPL'>
Networking applications for the K Desktop Environment.

- kdict: graphical client for the DICT protocol.
- kit: AOL instant messenger client, using the TOC protocol
- kpf: public fileserver applet
- krfb: Desktop Sharing server, allow others to access your desktop via VNC
- krdc: a client for Desktop Sharing and other VNC servers
</info><info fn="kdebase4-4.6.5-13.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.kde.org'
 license='GPL'>
This meta package requires all base kdebase 4 packages.
</info><info fn="gnome-power-manager-2.32.0-3.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.gnome.org/projects/gnome-power-manager/'
 license='GPLv2+'>
GNOME Power Manager uses the information and facilities provided by Upower
displaying icons and handling user callbacks in an interactive GNOME session.
GNOME Power Preferences allows authorised users to set policy and
change preferences.
</info><info fn="xmlto-0.0.23-6.src"
 distepoch='2011.0'
 sourcerpm=''
 url='https://fedorahosted.org/xmlto/'
 license='GPLv2+'>
This is a package for converting XML files to various formats using XSL
stylesheets.
</info><info fn="ifmetric-0.3-10.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://0pointer.de/lennart/projects/ifmetric/'
 license='GPLv2'>
ifmetric is a Linux tool for setting the metrics of all IPv4 routes
attached to a given network interface at once. This may be used to
change the priority of routing IPv4 traffic over the interface.
Lower metrics correlate with higher priorities.
</info><info fn="knetworkmanager-0.9-0.20110912.2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.kde.org'
 license='(GPLv2 or GPLv3) and GPLv2+ and LGPLv2+ and LGPLv2'>
KNetworkManager is a system tray applet for controlling network
connections on systems that use the NetworkManager daemon.
</info><info fn="xlockmore-5.38-0.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.tux.org/~bagleyd/xlockmore.html'
 license='BSD'>
The xlockmore utility is an enhanced version of the standard xlock
program, which allows you to lock an X session so that other users
can't access it.  Xlockmore runs a provided screensaver until you type
in your password.

Install the xlockmore package if you need a locking program to secure
X sessions.
</info><info fn="rpmdrake-5.26.11-0.5.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://wiki.mandriva.com/en/Installing_and_removing_software'
 license='GPLv2+'>
This package contains the Mandriva graphical software manipulation
tools.

Rpmdrake provides a simple interface that makes it easy to install
and remove software.

MandrivaUpdate is a single-purpose application for keeping your system
up to date with the latest official updates.

There is also a tool for configuring package sources (medias), which can
be run independently or accessed from within rpmdrake.
</info><info fn="abrt-1.1.14-12.src"
 distepoch='2011.0'
 sourcerpm=''
 url='https://fedorahosted.org/abrt/'
 license='GPLv2+'>
abrt is a tool to help users to detect defects in applications and
to create a bug report with all informations needed by maintainer to fix it.
It uses plugin system to extend its functionality.
</info><info fn="acl-2.2.51-3.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://savannah.nongnu.org/projects/acl'
 license='GPLv2+ and LGPLv2'>
This package contains the getfacl and setfacl utilities needed for
manipulating access control lists.
</info><info fn="bluedevil-1.1-3.src"
 distepoch='2011.0'
 sourcerpm=''
 url='https://projects.kde.org/projects/extragear/base/bluedevil'
 license='GPL'>
BlueDevil is the new bluetooth stack for KDE, it's composed of:
KCM, KDED, KIO, Library and some other small applications.
</info><info fn="systemd-29-8.4.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.freedesktop.org/wiki/Software/systemd'
 license='GPLv2+'>
systemd is a system and session manager for Linux, compatible with
SysV and LSB init scripts. systemd provides aggressive parallelization
capabilities, uses socket and D-Bus activation for starting services,
offers on-demand starting of daemons, keeps track of processes using
Linux cgroups, supports snapshotting and restoring of the system
state, maintains mount and automount points and implements an
elaborate transactional dependency-based service control logic. It can
work as a drop-in replacement for sysvinit.
</info><info fn="kde4-style-qtcurve-1.8.7-2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.kde-look.org/content/show.php?content=40492'
 license='GPLv2'>
QtCurve theme for KDE 4
</info><info fn="man-1.6g-2.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://primates.ximian.com/~flucifredi/man/'
 license='GPLv2'>
The man package includes three tools for finding information and/or
documentation about your Linux system: man, apropos and whatis. The man
system formats and displays on-line manual pages about commands or
functions on your system. Apropos searches the whatis database
(containing short descriptions of system commands) for a string. Whatis
searches its own database for a complete word.

The man package should be installed on your system because it is the
primary way for find documentation on a Mandriva Linux system.
</info><info fn="initscripts-9.25-8.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://svn.mandriva.com/cgi-bin/viewvc.cgi/soft/initscripts/trunk/'
 license='GPLv2 and GPLv2+'>
The initscripts package contains the basic system scripts used to boot
your Mandriva Linux system, change run levels, and shut the system
down cleanly.  Initscripts also contains the scripts that activate and
deactivate most network interfaces.
</info><info fn="gcc-4.6.1-3.2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://gcc.gnu.org/'
 license='GPLv3+ and GPLv3+ with exceptions and GPLv2+ with exceptions and LGPLv2+ and BSD'>
The gcc package contains the GNU Compiler Collection version 4.6.
</info><info fn="pidgin-2.10.4-1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.pidgin.im/'
 license='GPLv2+'>
Pidgin allows you to talk to anyone using a variety of messaging
protocols including AIM, MSN, Yahoo!, Jabber, Bonjour, Gadu-Gadu,
ICQ, IRC, Novell Groupwise, QQ, Lotus Sametime, SILC, Simple and
Zephyr.  These protocols are implemented using a modular, easy to
use design.  To use a protocol, just add an account using the
account editor.

Pidgin supports many common features of other clients, as well as many
unique features, such as perl scripting, TCL scripting and C plugins.

Pidgin is not affiliated with or endorsed by America Online, Inc.,
Microsoft Corporation, Yahoo! Inc., or ICQ Inc.
</info><info fn="ruby-1.8.7.p334-5.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.ruby-lang.org/'
 license='Ruby or GPLv2'>
Ruby is the interpreted scripting language for quick and
easy object-oriented programming.  It has many features to
process text files and to do system management tasks (as in
Perl).  It is simple, straight-forward, and extensible.
</info><info fn="webmin-1.590-1.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.webmin.com/webmin/'
 license='BSD'>
A web-based administration interface for Unix systems. Using Webmin you can
configure DNS, Samba, NFS, local/remote filesystems, Apache, Sendmail/Postfix,
and more using your web browser.

After installation, enter the URL https://localhost:10000/ into your browser
and login as root with your root password. Please consider logging in and
modify your password for security issue.

PLEASE NOTE THAT THIS VERSION NOW USES SECURE WEB TRANSACTIONS: YOU HAVE TO
LOGIN TO "https://localhost:10000/" AND NOT "http://localhost:10000/".
</info><info fn="libxslt-1.1.26-4.3.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://xmlsoft.org/XSLT/'
 license='MIT'>
This C library allows to transform XML files into other XML files
(or HTML, text, ...) using the standard XSLT stylesheet transformation
mechanism.
</info><info fn="dhcp-4.2.4-0.P2.1.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='https://www.isc.org/software/dhcp'
 license='Distributable'>
DHCP (Dynamic Host Configuration Protocol) is a protocol which allows
individual devices on an IP network to get their own network configuration
information (IP address, subnetmask, broadcast address, etc.) from a DHCP
server. The overall purpose of DHCP is to make it easier to administer a
large network. The dhcp package includes the DHCP server and a DHCP relay
agent. You will also need to install the dhcp-client or dhcpcd package,
or pump or dhcpxd, which provides the DHCP client daemon, on client machines.

If you want the DHCP server and/or relay, you will also need to install the
dhcp-server and/or dhcp-relay packages.
</info><info fn="openjpeg-1.3-8.2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.openjpeg.org/'
 license='BSD'>
The OpenJPEG library is an open-source JPEG 2000 codec written in C
language. It has been developed in order to promote the use of JPEG
2000, the new still-image compression standard from the Joint
Photographic Experts Group (JPEG).
</info><info fn="graphicsmagick-1.3.12-4.2.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.graphicsmagick.org/'
 license='GPLv2+'>
GraphicsMagick is the swiss army knife of image processing. It
provides a robust collection of tools and libraries which support
reading, writing, and manipulating an image in over 88 major formats
including important formats like DPX, GIF, JPEG, JPEG-2000, PNG, PDF,
SVG, and TIFF. GraphicsMagick supports huge images on systems that
support large files, and has been tested with gigapixel-size images.
GraphicsMagick can create new images on the fly, making it suitable
for building dynamic Web applications. GraphicsMagick may be used to
resize, rotate, sharpen, color reduce, or add special effects to an
image and save the result in the same or differing image format.
Image processing operations are available from the command line, as
well as through C, C++, Perl, or Windows COM programming interfaces.
Extensions are available from third-parties to support programming in
Python, Tcl, and Ruby. With some modification, language extensions for
ImageMagick may be used.
</info><info fn="apache-conf-2.2.23-0.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.mandriva.com'
 license='Apache License'>
This package contains configuration files for apache. It is necessary for
operation of the apache webserver. Having those files into a separate modules
provides better customization for OEMs and ISPs, who can modify the look and
feel of the apache webserver without having to re-compile the whole suite to
change a logo or config file.
</info><info fn="apache-2.2.23-0.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.apache.org'
 license='Apache License'>
This package contains the main binary of apache, a powerful, full-featured,
efficient and freely-available Web server. Apache is also the most popular Web
server on the Internet.

This version of apache is fully modular, and many modules are available in
pre-compiled formats, like PHP and mod_auth_external.

This package defaults to a maximum of 128 dynamically loadable modules.
This package defaults to a ServerLimit of 1024.

You can change these values at RPM build time by using for example:

--define 'maxmodules 512' --define 'serverlimit 2048'

The package was built to support a maximum of 128 dynamically loadable modules.
The package was built with a ServerLimit of 1024.
</info><info fn="apache-mod_suexec-2.2.23-0.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://httpd.apache.org/docs/suexec.html'
 license='Apache License'>
This module, in combination with the suexec support program
allows CGI scripts to run as a specified user and Group.

Normally, when a CGI or SSI program executes, it runs as the
same user who is running the web server.
</info><info fn="php-5.3.17-0.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.php.net'
 license='PHP License'>
PHP5 is an HTML-embeddable scripting language. PHP5 offers built-in database
integration for several commercial and non-commercial database management
systems, so writing a database-enabled script with PHP5 is fairly simple. The
most common use of PHP5 coding is probably as a replacement for CGI scripts.

This version of php has the suhosin patch 0.9.10 applied. Please
report bugs here: http://qa.mandriva.com/ so that the official maintainer of
this Mandriva package can help you. More information regarding the
suhosin patch 0.9.10 here: http://www.suhosin.org/
</info><info fn="php-ini-5.3.16-0.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.php.net'
 license='PHP License'>
The php-ini package contains the ini file required for PHP.
</info><info fn="wireshark-1.6.11-0.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.wireshark.org'
 license='GPLv2+ and GPLv3'>
Wireshark is a network traffic analyzer for Unix-ish operating systems. It is
based on GTK+, a graphical user interface library, and libpcap, a packet
capture and filtering library.

Wireshark is a fork of Ethereal(tm)
</info><info fn="postgresql9.0-9.0.10-0.1.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.postgresql.org/'
 license='BSD'>
PostgreSQL is an advanced Object-Relational database management system (DBMS)
that supports almost all SQL constructs (including transactions, subselects and
user-defined types and functions). The postgresql package includes the client
programs and libraries that you'll need to access a PostgreSQL DBMS server.
These PostgreSQL client programs are programs that directly manipulate the
internal structure of PostgreSQL databases on a PostgreSQL server. These client
programs can be located on the same machine with the PostgreSQL server, or may
be on a remote machine which accesses a PostgreSQL server over a network
connection. This package contains the client libraries for C and C++, as well
as command-line utilities for managing PostgreSQL databases on a PostgreSQL
server.

If you want to manipulate a PostgreSQL database on a remote PostgreSQL server,
you need this package. You also need to install this package if you're
installing the postgresql-server package.
</info><info fn="libtiff-3.9.5-1.4.src"
 distepoch='2011.0'
 sourcerpm=''
 url='http://www.remotesensing.org/libtiff/'
 license='BSD-like'>
The libtiff package contains a library of functions for manipulating TIFF
(Tagged Image File Format) image format files. TIFF is a widely used file
format for bitmapped images. TIFF files usually end in the .tif extension
and they are often quite large.
</info></media_info>
