[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14.4-gnuowen (sam@judas) (gcc version 4.8.2 (Debian 4.8.2-16) ) #19 SMP PREEMPT Fri May 23 08:56:34 MDT 2014
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000c0000-0x000000003f6cffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003f6d0000-0x000000003f7fffff] type 16
[    0.000000] BIOS-e820: [mem 0x000000003f800000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 1703WMF/1703WMF, BIOS CBET4000 7BETC7WW (2.08 ) 06/04/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3f6d0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 0C0000000 write-back
[    0.000000]   1 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   2 base 0D0000000 mask 0F0000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] found SMP MP-table at [mem 0x000f0400-0x000f040f] mapped at [c00f0400]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x36400000-0x367fffff]
[    0.000000]  [mem 0x36400000-0x367fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x30000000-0x363fffff]
[    0.000000]  [mem 0x30000000-0x363fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x2fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x36800000-0x377fdfff]
[    0.000000]  [mem 0x36800000-0x373fffff] page 2M
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] BRK [0x017cb000, 0x017cbfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36bca000-0x375dcfff]
[    0.000000] ACPI: RSDP 000f0800 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 3f6e28e0 00004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 3f6e2a10 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 3f6e2a50 000068 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: MCFG 3f6e2ac0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 3f6e5d10 0000F4 (v03 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 3f6e2b40 0030CA (v03 COREv4 COREBOOT 20090419 INTL 20140114)
[    0.000000] ACPI: FACS 3f6e2b00 000040
[    0.000000] ACPI: SSDT 3f6e5e10 0002FC (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 126MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] BRK [0x017cc000, 0x017ccfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0x3f6cffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009ffff]
[    0.000000]   node   0: [mem 0x00100000-0x3f6cffff]
[    0.000000] On node 0 totalpages: 259695
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 254 pages used for memmap
[    0.000000]   HighMem zone: 32466 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xefffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f75de000 s31360 r0 d21888 u53248
[    0.000000] pcpu-alloc: s31360 r0 d21888 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257919
[    0.000000] Kernel command line: BOOT_IMAGE=(ahci0,1)/boot/vmlinuz-3.14.4-gnuowen root=/dev/sda1 processor.max_cstate=2 drm.debug=0x06 console=tty0 console=ttyS0,115200n8
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0003f6d0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1011284K/1038780K available (4113K kernel code, 324K rwdata, 1560K rodata, 480K init, 1448K bss, 27496K reserved, 129864K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff8e000 - 0xfffff000   ( 452 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc15de000 - 0xc1656000   ( 480 kB)
[    0.000000]       .data : 0xc14049c3 - 0xc15dd200   (1890 kB)
[    0.000000]       .text : 0xc1000000 - 0xc14049c3   (4114 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1662.566 MHz processor
[    0.002012] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.13 BogoMIPS (lpj=1662566)
[    0.004005] pid_max: default: 32768 minimum: 301
[    0.005016] ACPI: Core revision 20131218
[    0.009723] ACPI: All ACPI Tables successfully acquired
[    0.012958] Security Framework initialized
[    0.013016] SELinux:  Disabled at boot.
[    0.014020] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.015006] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.016286] Initializing cgroup subsys memory
[    0.017010] Initializing cgroup subsys devices
[    0.018005] Initializing cgroup subsys freezer
[    0.019005] Initializing cgroup subsys net_cls
[    0.020005] Initializing cgroup subsys blkio
[    0.021004] Initializing cgroup subsys perf_event
[    0.022033] Disabled fast string operations
[    0.023008] CPU: Physical Processor ID: 0
[    0.024004] CPU: Processor Core ID: 0
[    0.025005] mce: CPU supports 6 MCE banks
[    0.026013] CPU0: Thermal monitoring enabled (TM2)
[    0.027015] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.027015] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[    0.027015] tlb_flushall_shift: 6
[    0.028102] Freeing SMP alternatives memory: 12K (c1656000 - c1659000)
[    0.030075] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.031412] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.042917] smpboot: CPU0: Intel(R) Core(TM) Duo CPU      L2400  @ 1.66GHz (fam: 06, model: 0e, stepping: 0c)
[    0.047000] Performance Events: Core events, core PMU driver.
[    0.049003] ... version:                1
[    0.050002] ... bit width:              40
[    0.051002] ... generic registers:      2
[    0.052002] ... value mask:             000000ffffffffff
[    0.053002] ... max period:             000000007fffffff
[    0.054002] ... fixed-purpose events:   0
[    0.055002] ... event mask:             0000000000000003
[    0.062083] CPU 1 irqstacks, hard=f62a4000 soft=f62a6000
[    0.062086] x86: Booting SMP configuration:
[    0.063004] .... node  #0, CPUs:      #1
[    0.003000] Initializing CPU#1
[    0.003000] Disabled fast string operations
[    0.084096] x86: Booted up 1 node, 2 CPUs
[    0.085004] smpboot: Total of 2 processors activated (6650.26 BogoMIPS)
[    0.088135] devtmpfs: initialized
[    0.092424] regulator-dummy: no parameters
[    0.096082] NET: Registered protocol family 16
[    0.101199] cpuidle: using governor ladder
[    0.105003] cpuidle: using governor menu
[    0.109084] ACPI: bus type PCI registered
[    0.113075] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.123004] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.129002] PCI: Using MMCONFIG for extended config space
[    0.135002] PCI: Using configuration type 1 for base access
[    0.143036] bio: create slab <bio-0> at 0
[    0.144064] ACPI: Added _OSI(Module Device)
[    0.145003] ACPI: Added _OSI(Processor Device)
[    0.146002] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.147002] ACPI: Added _OSI(Processor Aggregator Device)
[    0.151729] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.153220] ACPI: Interpreter enabled
[    0.154014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    0.157003] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    0.160019] ACPI: (supports S0 S3 S4 S5)
[    0.161002] ACPI: Using IOAPIC for interrupt routing
[    0.162038] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.163318] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.173757] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.174010] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.175115] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.176137] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.177052] PCI host bridge to bus 0000:00
[    0.178005] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.179004] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.180004] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.181004] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.182004] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.183004] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.184004] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.185004] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.186004] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.187004] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.188004] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.189004] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.190004] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.191004] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.192004] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.193004] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.194004] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.195004] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[    0.196004] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.197015] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[    0.197174] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[    0.197190] pci 0000:00:02.0: reg 0x10: [mem 0xe4300000-0xe437ffff]
[    0.197199] pci 0000:00:02.0: reg 0x14: [io  0x50a0-0x50a7]
[    0.197208] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[    0.197217] pci 0000:00:02.0: reg 0x1c: [mem 0xe4400000-0xe443ffff]
[    0.197361] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.197374] pci 0000:00:02.1: reg 0x10: [mem 0xe4380000-0xe43fffff]
[    0.197579] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.197605] pci 0000:00:1b.0: reg 0x10: [mem 0xe4440000-0xe4443fff 64bit]
[    0.197725] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.197797] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.198079] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.198204] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.198353] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.198475] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.199129] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.199247] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.199391] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.199506] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.199651] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.199711] pci 0000:00:1d.0: reg 0x20: [io  0x5000-0x501f]
[    0.199820] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.200074] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.200133] pci 0000:00:1d.1: reg 0x20: [io  0x5020-0x503f]
[    0.200242] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.201074] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.201134] pci 0000:00:1d.2: reg 0x20: [io  0x5040-0x505f]
[    0.201240] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.202071] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.202131] pci 0000:00:1d.3: reg 0x20: [io  0x5060-0x507f]
[    0.202237] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.203087] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.203114] pci 0000:00:1d.7: reg 0x10: [mem 0xe4444000-0xe44443ff]
[    0.203225] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.203293] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.204079] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.204268] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.204387] pci 0000:00:1f.0: address space collision: [io  0x0500-0x057f] conflicts with ACPI CPU throttle [??? 0x00000510-0x00000515 flags 0x80000000]
[    0.205009] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.206006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[    0.207005] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[    0.208005] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[    0.209156] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.209176] pci 0000:00:1f.1: reg 0x10: [io  0x50a8-0x50af]
[    0.209190] pci 0000:00:1f.1: reg 0x14: [io  0x50c8-0x50cb]
[    0.209205] pci 0000:00:1f.1: reg 0x18: [io  0x50b0-0x50b7]
[    0.209219] pci 0000:00:1f.1: reg 0x1c: [io  0x50cc-0x50cf]
[    0.209233] pci 0000:00:1f.1: reg 0x20: [io  0x5080-0x508f]
[    0.209380] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[    0.209407] pci 0000:00:1f.2: reg 0x10: [io  0x50b8-0x50bf]
[    0.209421] pci 0000:00:1f.2: reg 0x14: [io  0x50d0-0x50d3]
[    0.209435] pci 0000:00:1f.2: reg 0x18: [io  0x50c0-0x50c7]
[    0.209449] pci 0000:00:1f.2: reg 0x1c: [io  0x50d4-0x50d7]
[    0.209463] pci 0000:00:1f.2: reg 0x20: [io  0x5090-0x509f]
[    0.209477] pci 0000:00:1f.2: reg 0x24: [mem 0xe4444400-0xe44447ff]
[    0.209539] pci 0000:00:1f.2: PME# supported from D3hot
[    0.209671] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.209748] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.210064] pci 0000:01:00.0: [8086:109a] type 00 class 0x020000
[    0.210098] pci 0000:01:00.0: reg 0x10: [mem 0xe4100000-0xe411ffff]
[    0.210142] pci 0000:01:00.0: reg 0x18: [io  0x4000-0x401f]
[    0.210347] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.210448] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.211021] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.212007] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.212014] pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.212138] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.212173] pci 0000:02:00.0: reg 0x10: [mem 0xe4200000-0xe420ffff 64bit]
[    0.212351] pci 0000:02:00.0: supports D1
[    0.212355] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.214021] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.216005] pci 0000:00:1c.1:   bridge window [mem 0xe4200000-0xe42fffff]
[    0.216107] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.217104] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.218085] pci 0000:05:00.0: [1180:0476] type 02 class 0x060700
[    0.218108] pci 0000:05:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[    0.219004] pci 0000:05:00.0: MMC cards are now supported by standard SDHCI controller
[    0.220018] pci 0000:05:00.0: reg 0x10: [mem 0xe2000000-0xe2000fff]
[    0.220057] pci 0000:05:00.0: supports D1 D2
[    0.220061] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.220102] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.221080] pci 0000:05:00.1: [1180:0552] type 00 class 0x0c0010
[    0.221105] pci 0000:05:00.1: reg 0x10: [mem 0xe2001000-0xe20017ff]
[    0.221208] pci 0000:05:00.1: supports D1 D2
[    0.221211] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.221312] pci 0000:05:00.2: [1180:0822] type 00 class 0x080500
[    0.221337] pci 0000:05:00.2: reg 0x10: [mem 0xe2001800-0xe20018ff]
[    0.221442] pci 0000:05:00.2: supports D1 D2
[    0.222004] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.222154] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
[    0.223007] pci 0000:00:1e.0:   bridge window [io  0x2000-0x3fff]
[    0.223014] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe20fffff]
[    0.223025] pci 0000:00:1e.0:   bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.223029] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.223033] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.223038] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.223042] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[    0.223046] pci 0000:00:1e.0:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[    0.223050] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[    0.223055] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
[    0.223059] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.223063] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.223067] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.223071] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.223076] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.223080] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.223084] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[    0.223088] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[    0.223093] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[    0.223097] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    0.223101] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.223169] pci_bus 0000:06: busn_res: can not insert [bus 06-ff] under [bus 05-06] (conflicts with (null) [bus 05-06])
[    0.223177] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
[    0.223182] pci_bus 0000:06: busn_res: can not insert [bus 06-09] under [bus 05-06] (conflicts with (null) [bus 05-06])
[    0.223189] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05-06]
[    0.224045] pci_bus 0000:00: on NUMA node 0
[    0.224167] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.228274] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.231675] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.235272] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.238663] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.242274] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.246671] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.250275] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.255250] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.256077] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.257010] vgaarb: loaded
[    0.258002] vgaarb: bridge control possible 0000:00:02.0
[    0.259136] SCSI subsystem initialized
[    0.260037] libata version 3.00 loaded.
[    0.260072] PCI: Using ACPI for IRQ routing
[    0.264091] PCI: pci_cache_line_size set to 64 bytes
[    0.264186] e820: reserve RAM buffer [mem 0x3f6d0000-0x3fffffff]
[    0.264442] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.265008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.267203] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.270028] Switched to clocksource hpet
[    0.279409] pnp: PnP ACPI init
[    0.282515] ACPI: bus type PNP registered
[    0.286680] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.293305] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.299932] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.306562] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.313192] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.319820] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.326444] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.333073] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.339703] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.340287] pnp 00:01: [dma 4]
[    0.340336] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.340392] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.340552] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.347178] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.347251] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.347342] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.353277] system 00:05: [io  0x0500-0x057f] could not be reserved
[    0.359557] system 00:05: [io  0x0480-0x04bf] has been reserved
[    0.365488] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.365549] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.365627] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.365699] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.365746] pnp: PnP ACPI: found 9 devices
[    0.369861] ACPI: bus type PNP unregistered
[    0.412710] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.412763] pci 0000:00:1f.0: BAR 13: [io  0x0500-0x057f] has bogus alignment
[    0.419915] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.419931] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[    0.427773] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.432755] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.438862] pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.445662] pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x401fffff 64bit pref]
[    0.453422] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.458402] pci 0000:00:1c.1:   bridge window [mem 0xe4200000-0xe42fffff]
[    0.465210] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.470198] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.475194] pci 0000:05:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.475199] pci 0000:05:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.475203] pci 0000:05:00.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.475208] pci 0000:05:00.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.475223] pci 0000:05:00.0: BAR 15: assigned [mem 0x44000000-0x47ffffff pref]
[    0.482554] pci 0000:05:00.0: BAR 16: assigned [mem 0x48000000-0x4bffffff]
[    0.489444] pci 0000:05:00.0: BAR 13: assigned [io  0x2000-0x20ff]
[    0.495639] pci 0000:05:00.0: BAR 14: assigned [io  0x2400-0x24ff]
[    0.501828] pci 0000:05:00.0: CardBus bridge to [bus 06-09]
[    0.507418] pci 0000:05:00.0:   bridge window [io  0x2000-0x20ff]
[    0.513530] pci 0000:05:00.0:   bridge window [io  0x2400-0x24ff]
[    0.519639] pci 0000:05:00.0:   bridge window [mem 0x44000000-0x47ffffff pref]
[    0.526879] pci 0000:05:00.0:   bridge window [mem 0x48000000-0x4bffffff]
[    0.533678] pci 0000:00:1e.0: PCI bridge to [bus 05-06]
[    0.538920] pci 0000:00:1e.0:   bridge window [io  0x2000-0x3fff]
[    0.545026] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe20fffff]
[    0.551825] pci 0000:00:1e.0:   bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.559588] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.559592] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.559597] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.559601] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.559605] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.559609] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.559613] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.559617] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.559621] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.559625] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.559629] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.559633] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.559637] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.559641] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.559645] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.559649] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.559653] pci_bus 0000:00: resource 20 [mem 0x40000000-0xfebfffff]
[    0.559657] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.559662] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.559666] pci_bus 0000:01: resource 1 [mem 0xe4100000-0xe41fffff]
[    0.559670] pci_bus 0000:01: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[    0.559674] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe42fffff]
[    0.559678] pci_bus 0000:05: resource 0 [io  0x2000-0x3fff]
[    0.559682] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe20fffff]
[    0.559687] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.559691] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.559695] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.559699] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.559703] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.559707] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.559711] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.559715] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff]
[    0.559719] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.559723] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.559727] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.559731] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
[    0.559735] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.559739] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.559744] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.559748] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff]
[    0.559752] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff]
[    0.559756] pci_bus 0000:05: resource 20 [mem 0x40000000-0xfebfffff]
[    0.559760] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.559764] pci_bus 0000:06: resource 0 [io  0x2000-0x20ff]
[    0.559768] pci_bus 0000:06: resource 1 [io  0x2400-0x24ff]
[    0.559772] pci_bus 0000:06: resource 2 [mem 0x44000000-0x47ffffff pref]
[    0.559776] pci_bus 0000:06: resource 3 [mem 0x48000000-0x4bffffff]
[    0.559822] NET: Registered protocol family 2
[    0.564399] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.571483] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.577981] TCP: Hash tables configured (established 8192 bind 8192)
[    0.584383] TCP: reno registered
[    0.587626] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.593563] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.600019] NET: Registered protocol family 1
[    0.604403] pci 0000:00:02.0: Boot video device
[    0.605706] PCI: CLS 64 bytes, default 64
[    0.605774] Unpacking initramfs...
[    0.954532] Freeing initrd memory: 10316K (f6bca000 - f75dd000)
[    0.961159] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.967314] audit: initializing netlink subsys (disabled)
[    0.972753] audit: type=2000 audit(1401898856.971:1): initialized
[    0.979287] bounce pool size: 64 pages
[    0.983055] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.992894] VFS: Disk quotas dquot_6.5.2
[    0.996916] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.004268] msgmni has been set to 1741
[    1.008621] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.016031] io scheduler noop registered
[    1.019971] io scheduler deadline registered
[    1.024372] io scheduler cfq registered (default)
[    1.029416] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.029717] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    1.029984] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    1.030264] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    1.030449] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.037429] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.043970] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    1.044011] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    1.050986] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.057525] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    1.057561] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    1.064536] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    1.064568] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    1.071550] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    1.071609] intel_idle: does not run on family 6 model 14
[    1.071731] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0E:00/input/input0
[    1.082700] ACPI: Sleep Button [SLPB]
[    1.086474] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0D:00/input/input1
[    1.097415] ACPI: Lid Switch [LID]
[    1.100934] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.108348] ACPI: Power Button [PWRF]
[    1.112307] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.119370] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.128452] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.155594] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.164012] Linux agpgart interface v0.103
[    1.168171] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    1.173805] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.182823] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.189378] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.196247] [drm] Initialized drm 1.1.0 20060810
[    1.201439] [drm:i915_dump_device_info], i915 device info: gen=3, pciid=0x27a2 flags=is_mobile,is_i945gm,has_fbc,has_hotplug,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,
[    1.201495] [drm:intel_detect_pch], No PCH found.
[    1.201499] [drm] Memory usable by graphics device = 256M
[    1.206910] [drm:i915_gem_gtt_init], GMADR size = 256M
[    1.206913] [drm:i915_gem_gtt_init], GTT stolen size = 8M
[    1.207194] [drm:intel_opregion_setup], graphic opregion physical addr: 0x0
[    1.207198] [drm:intel_opregion_setup], ACPI OpRegion not supported!
[    1.207225] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.213850] [drm] Driver supports precise vblank timestamp query.
[    1.219957] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz
[    1.219962] i915 0000:00:02.0: Invalid ROM contents
[    1.224851] [drm:intel_parse_bios], VBT signature missing
[    1.224854] [drm] failed to find VBIOS tables
[    1.229229] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[    1.229239] [drm:i915_gem_init_stolen], found 8388608 bytes of stolen memory at 3f800000
[    1.229276] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[    1.230216] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[    1.230216] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[    1.230216] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[    1.230216] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[    1.230216] i915: render error detected, EIR: 0x00000010
[    1.230216] i915: page table error
[    1.230216] i915:   PGTBL_ER: 0x00000012
[    1.230216] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[    1.230216] i915: render error detected, EIR: 0x00000010
[    1.230216] i915: page table error
[    1.230216] i915:   PGTBL_ER: 0x00000012
[    1.305256] [drm:intel_modeset_init], 2 display pipes available.
[    1.305264] [drm:intel_crtc_init], swapping pipes & planes for FBC
[    1.305267] [drm:intel_modeset_init], pipe A sprite A init failed: -19
[    1.305273] [drm:intel_crtc_init], swapping pipes & planes for FBC
[    1.305276] [drm:intel_modeset_init], pipe B sprite B init failed: -19
[    1.305282] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.366014] [drm] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
[    1.403117] [drm:intel_lvds_init], using preferred mode from EDID: 
[    1.403123] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    1.403129] [drm:intel_lvds_init], detected single-link lvds configuration
[    1.403174] [drm:intel_panel_setup_backlight], failed to setup backlight for connector LVDS-1
[    1.403286] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, ffff000]
[    1.405682] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[    1.405688] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
[    1.405813] [drm] initialized overlay support
[    1.410184] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
[    1.410193] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled
[    1.410198] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B
[    1.410203] [drm:intel_modeset_readout_hw_state], [ENCODER:17:DAC-17] hw state readout: disabled, pipe A
[    1.410208] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TV-19] hw state readout: disabled, pipe A
[    1.410212] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled
[    1.410216] [drm:intel_modeset_readout_hw_state], [CONNECTOR:16:VGA-1] hw state readout: disabled
[    1.410220] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:SVIDEO-1] hw state readout: disabled
[    1.410226] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[    1.410229] [drm:intel_dump_pipe_config], cpu_transcoder: A
[    1.410232] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[    1.410236] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.410240] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.410243] [drm:intel_dump_pipe_config], requested mode:
[    1.410248] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    1.410251] [drm:intel_dump_pipe_config], adjusted mode:
[    1.410256] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    1.410260] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[    1.410263] [drm:intel_dump_pipe_config], port clock: 0
[    1.410266] [drm:intel_dump_pipe_config], pipe src size: 0x0
[    1.410270] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    1.410273] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    1.410276] [drm:intel_dump_pipe_config], ips: 0
[    1.410279] [drm:intel_dump_pipe_config], double wide: 0
[    1.410283] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
[    1.410286] [drm:intel_dump_pipe_config], cpu_transcoder: B
[    1.410289] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[    1.410293] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.410297] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.410300] [drm:intel_dump_pipe_config], requested mode:
[    1.410305] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1024 0 0 0 768 0 0 0 0x0 0x0
[    1.410308] [drm:intel_dump_pipe_config], adjusted mode:
[    1.410313] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[    1.410318] [drm:intel_dump_crtc_timings], crtc timings: 54167 1024 1048 1184 1344 768 771 777 806, type: 0x0 flags: 0xa
[    1.410321] [drm:intel_dump_pipe_config], port clock: 54167
[    1.410324] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[    1.410328] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[    1.410331] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    1.410334] [drm:intel_dump_pipe_config], ips: 0
[    1.410337] [drm:intel_dump_pipe_config], double wide: 0
[    1.410341] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    1.410346] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    1.410350] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    1.410353] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    1.410357] [drm:check_crtc_state], [CRTC:3]
[    1.410360] [drm:check_crtc_state], [CRTC:4]
[    1.410377] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    1.410380] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[    1.410395] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    1.410401] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    1.410407] [drm:drm_mode_debug_printmodeline], Modeline 12:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    1.410413] [drm:drm_mode_debug_printmodeline], Modeline 9:"1024x768" 40 43330 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    1.410418] [drm:drm_mode_debug_printmodeline], Modeline 10:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    1.410424] [drm:drm_mode_debug_printmodeline], Modeline 11:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    1.410428] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:VGA-1]
[    1.410432] [drm:intel_crt_detect], [CONNECTOR:16:VGA-1] force=1
[    1.422017] [drm:intel_crt_detect], CRT not detected via hotplug
[    1.473014] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[    1.481393] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    1.481396] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[    1.481400] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:VGA-1] disconnected
[    1.481404] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:SVIDEO-1]
[    1.481408] [drm:intel_tv_detect], [CONNECTOR:18:SVIDEO-1] force=1
[    1.481413] [drm:intel_get_load_detect_pipe], [CONNECTOR:18:SVIDEO-1], [ENCODER:19:TV-19]
[    1.481416] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[    1.481427] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    1.481432] [drm:connected_sink_compute_bpp], [CONNECTOR:18:SVIDEO-1] checking for sink bpp constrains
[    1.481436] [drm:intel_tv_compute_config], forcing bpc to 8 for TV
[    1.481440] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[    1.481443] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[    1.481446] [drm:intel_dump_pipe_config], cpu_transcoder: A
[    1.481449] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[    1.481453] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.481457] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.481460] [drm:intel_dump_pipe_config], requested mode:
[    1.481465] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[    1.481468] [drm:intel_dump_pipe_config], adjusted mode:
[    1.481474] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[    1.481479] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
[    1.481482] [drm:intel_dump_pipe_config], port clock: 108000
[    1.481485] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
[    1.481489] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    1.481492] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    1.481495] [drm:intel_dump_pipe_config], ips: 0
[    1.481498] [drm:intel_dump_pipe_config], double wide: 0
[    1.488679] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 5120
[    1.488685] [drm:intel_update_fbc], no output, disabling
[    1.488692] [drm:intel_crtc_mode_set], [ENCODER:19:TV-19] set [MODE:0:NTSC 480i]
[    1.494458] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    1.494462] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    1.494465] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[    1.494468] [drm:intel_calculate_wm], FIFO watermark level: -5
[    1.494472] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[    1.494475] [drm:i9xx_update_wm], self-refresh entries: 80
[    1.494478] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 47
[    1.494481] [drm:i9xx_update_wm], memory self refresh enabled
[    1.526017] [drm:intel_update_fbc], disabled per chip default
[    1.526025] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    1.526030] [drm:intel_connector_check_state], [CONNECTOR:18:SVIDEO-1]
[    1.526034] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    1.526038] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    1.526041] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    1.526045] [drm:check_crtc_state], [CRTC:3]
[    1.526055] [drm:check_crtc_state], [CRTC:4]
[    1.560017] [drm:intel_tv_detect_type], TV detected: c0007, 7f0000aa
[    1.560021] [drm:intel_tv_detect_type], Unrecognised TV connection
[    1.590018] [drm:intel_release_load_detect_pipe], [CONNECTOR:18:SVIDEO-1], [ENCODER:19:TV-19]
[    1.590023] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[    1.634020] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    1.634024] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    1.634027] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[    1.634030] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[    1.634033] [drm:i9xx_update_wm], memory self refresh disabled
[    1.634036] [drm:intel_update_fbc], no output, disabling
[    1.634043] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    1.634047] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    1.634051] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    1.634055] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    1.634058] [drm:check_crtc_state], [CRTC:3]
[    1.634061] [drm:check_crtc_state], [CRTC:4]
[    1.634242] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:SVIDEO-1] disconnected
[    1.634247] [drm:drm_setup_crtcs], 
[    1.634251] [drm:drm_enable_connectors], connector 5 enabled? yes
[    1.634254] [drm:drm_enable_connectors], connector 16 enabled? no
[    1.634257] [drm:drm_enable_connectors], connector 18 enabled? no
[    1.634261] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[    1.634264] [drm:drm_target_preferred], looking for preferred mode on connector 5
[    1.634267] [drm:drm_target_preferred], found mode 1024x768
[    1.634270] [drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
[    1.634274] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 4
[    1.634279] [drm:intelfb_create], no BIOS fb, allocating a new one
[    1.634283] [drm:i915_gem_object_create_stolen], creating stolen object: size=300000
[    1.634288] [drm:i915_pages_create_for_stolen], offset=0x20000, size=3145728
[    1.636637] [drm:intelfb_create], allocated 1024x768 fb: 0x00020000, bo f4a9e900
[    1.636753] fbcon: inteldrmfb (fb0) is primary device
[    1.636805] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
[    1.636809] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    1.636811] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.636814] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    1.636816] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[    1.636818] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[    1.636822] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    1.636826] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    1.636828] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
[    1.636830] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.636834] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[    1.636838] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
[    1.636841] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
[    1.636844] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[    1.636846] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
[    1.636848] [drm:intel_dump_pipe_config], cpu_transcoder: B
[    1.636849] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[    1.636852] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.636854] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.636856] [drm:intel_dump_pipe_config], requested mode:
[    1.636860] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    1.636861] [drm:intel_dump_pipe_config], adjusted mode:
[    1.636865] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    1.636868] [drm:intel_dump_crtc_timings], crtc timings: 54160 1024 1048 1184 1344 768 771 777 806, type: 0x48 flags: 0xa
[    1.636870] [drm:intel_dump_pipe_config], port clock: 54160
[    1.636871] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[    1.636873] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[    1.636876] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    1.636877] [drm:intel_dump_pipe_config], ips: 0
[    1.636878] [drm:intel_dump_pipe_config], double wide: 0
[    1.914019] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000008
[    1.914022] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    1.914025] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    1.914026] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[    1.914029] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[    1.914030] [drm:i9xx_update_wm], memory self refresh disabled
[    1.914035] [drm:i9xx_get_refclk], using SSC reference clock of 100000 kHz
[    1.914244] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 4096
[    1.914248] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x768]
[    1.914890] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    1.914892] [drm:intel_calculate_wm], FIFO entries required for mode: 17
[    1.914893] [drm:intel_calculate_wm], FIFO watermark level: 9
[    1.914895] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    1.914897] [drm:i9xx_update_wm], FIFO watermarks - A: 9, B: 29
[    1.914898] [drm:i9xx_update_wm], self-refresh entries: 64
[    1.914900] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 9, B: 29, C: 2, SR 63
[    1.914902] [drm:i9xx_update_wm], memory self refresh enabled
[    1.936017] [drm:intel_update_fbc], disabled per chip default
[    1.963018] tsc: Refined TSC clocksource calibration: 1662.499 MHz
[    2.216019] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    2.216022] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    2.216024] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    2.216026] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    2.216028] [drm:check_crtc_state], [CRTC:3]
[    2.216030] [drm:check_crtc_state], [CRTC:4]
[    2.216060] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    2.216063] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    2.216065] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.221447] Console: switching to colour frame buffer device 128x48
[    2.221452] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    2.221455] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    2.221457] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.244229] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.250483] i915 0000:00:02.0: registered panic notifier
[    2.255873] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.263281] ahci 0000:00:1f.2: version 3.0
[    2.263489] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    2.263529] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.270253] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[    2.278613] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    2.287466] scsi0 : ahci
[    2.290230] scsi1 : ahci
[    2.292976] scsi2 : ahci
[    2.295724] scsi3 : ahci
[    2.298390] ata1: SATA max UDMA/133 abar m1024@0xe4444400 port 0xe4444500 irq 44
[    2.305876] ata2: DUMMY
[    2.308362] ata3: DUMMY
[    2.310849] ata4: DUMMY
[    2.313465] ata_piix 0000:00:1f.1: version 2.13
[    2.314231] scsi4 : ata_piix
[    2.317341] scsi5 : ata_piix
[    2.322472] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14
[    2.331665] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15
[    2.340915] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.351340] ata6: port disabled--ignoring
[    2.363610] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.370786] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.378122] mousedev: PS/2 mouse device common for all mice
[    2.385866] rtc_cmos 00:06: RTC can wake from S4
[    2.392754] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.400931] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.410793] device-mapper: uevent: version 1.0.3
[    2.417599] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    2.428353] TCP: cubic registered
[    2.434032] NET: Registered protocol family 10
[    2.440918] mip6: Mobile IPv6
[    2.445983] NET: Registered protocol family 17
[    2.452595] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.463399] Key type dns_resolver registered
[    2.470070] Using IPI No-Shortcut mode
[    2.476063] registered taskstats version 1
[    2.482743] regulator-dummy: disabling
[    2.488650] rtc_cmos 00:06: setting system clock to 2014-06-04 16:20:59 UTC (1401898859)
[    2.494736] ata5.00: ATAPI: DVD/CDRW UJDA775, CB03, max UDMA/33
[    2.500615] ata5.00: configured for UDMA/33
[    2.775040] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.783540] ata1.00: ATA-7: INTEL SSDSA2M040G2GC, 2CV102M3, max UDMA/133
[    2.792312] ata1.00: 78165360 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    2.801258] ata1.00: configured for UDMA/133
[    2.807747] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2M040 2CV1 PQ: 0 ANSI: 5
[    2.818165] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    2.828015] sd 0:0:0:0: [sda] Write Protect is off
[    2.834900] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.834920] scsi 4:0:0:0: CD-ROM            MATSHITA DVD/CDRW UJDA775 CB03 PQ: 0 ANSI: 5
[    2.834937] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.835723]  sda: sda1 sda2
[    2.836180] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.879219] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    2.888199] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.895938] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.896655] Freeing unused kernel memory: 480K (c15de000 - c1656000)
[    2.905309] Write protecting the kernel text: 4116k
[    2.912471] Write protecting the kernel read-only data: 1564k
[    2.941537] udevd[85]: starting version 175
[    2.953237] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    2.953243] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    2.953246] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.963278] Switched to clocksource tsc
[    3.004416] ACPI: bus type USB registered
[    3.015707] pps_core: LinuxPPS API ver. 1 registered
[    3.023405] usbcore: registered new interface driver usbfs
[    3.033132] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.050835] PTP clock support registered
[    3.067447] usbcore: registered new interface driver hub
[    3.081257] thermal LNXTHERM:00: registered as thermal_zone0
[    3.089873] ACPI: Thermal Zone [THM0] (54 C)
[    3.125021] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    3.125026] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    3.125030] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    3.136159] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    3.143059] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    3.150377] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    3.162108] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
[    3.162268] thermal LNXTHERM:01: registered as thermal_zone1
[    3.168054] usbcore: registered new device driver usb
[    3.176233] sdhci: Secure Digital Host Controller Interface driver
[    3.181205] uhci_hcd: USB Universal Host Controller Interface driver
[    3.181426] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.181435] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    3.181483] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000
[    3.181574] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    3.181577] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.181580] usb usb1: Product: UHCI Host Controller
[    3.181582] usb usb1: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    3.181584] usb usb1: SerialNumber: 0000:00:1d.0
[    3.181613] ACPI: Thermal Zone [THM1] (47 C)
[    3.193243] hub 1-0:1.0: USB hub found
[    3.193254] hub 1-0:1.0: 2 ports detected
[    3.193576] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.193584] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    3.193655] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005020
[    3.193734] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.193737] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.193739] usb usb2: Product: UHCI Host Controller
[    3.193741] usb usb2: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    3.193743] usb usb2: SerialNumber: 0000:00:1d.1
[    3.193920] hub 2-0:1.0: USB hub found
[    3.193932] hub 2-0:1.0: 2 ports detected
[    3.194253] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.194260] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    3.194323] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[    3.194399] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.194402] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.194404] usb usb3: Product: UHCI Host Controller
[    3.194406] usb usb3: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    3.194409] usb usb3: SerialNumber: 0000:00:1d.2
[    3.194585] hub 3-0:1.0: USB hub found
[    3.194596] hub 3-0:1.0: 2 ports detected
[    3.194905] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.194912] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    3.194976] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
[    3.195070] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.195073] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.195075] usb usb4: Product: UHCI Host Controller
[    3.195077] usb usb4: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    3.195080] usb usb4: SerialNumber: 0000:00:1d.3
[    3.195262] hub 4-0:1.0: USB hub found
[    3.195276] hub 4-0:1.0: 2 ports detected
[    3.196302] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[    3.432379] sdhci: Copyright(c) Pierre Ossman
[    3.433382] xor: measuring software checksum speed
[    3.443005]    pIII_sse  :  4296.000 MB/sec
[    3.453025]    prefetch64-sse:  4668.000 MB/sec
[    3.459632] xor: using function: prefetch64-sse (4668.000 MB/sec)
[    3.482270] firewire_ohci 0000:05:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    3.485006] raid6: mmxx1     1617 MB/s
[    3.500763] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:3d:c3:60
[    3.502136] raid6: mmxx2     1683 MB/s
[    3.517075] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
[    3.519026] raid6: sse1x1    1199 MB/s
[    3.532585] sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 18)
[    3.536030] raid6: sse1x2    1570 MB/s
[    3.548717] e1000e 0000:01:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005302-003
[    3.553037] raid6: sse2x1    1843 MB/s
[    3.565680] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    3.570033] raid6: sse2x2    1960 MB/s
[    3.570035] raid6: using algorithm sse2x2 (1960 MB/s)
[    3.570036] raid6: using intx1 recovery algorithm
[    3.575094] bio: create slab <bio-1> at 1
[    3.575491] Btrfs loaded
[    3.575531] BTRFS: selftest: Running btrfs free space cache tests
[    3.575532] BTRFS: selftest: Running extent only tests
[    3.575542] BTRFS: selftest: Running bitmap only tests
[    3.575553] BTRFS: selftest: Running bitmap and extent tests
[    3.575567] BTRFS: selftest: Free space cache tests finished
[    3.575570] BTRFS: selftest: Running extent buffer operation tests
[    3.575570] BTRFS: selftest: Running btrfs_split_item tests
[    3.575594] BTRFS: selftest: Running find delalloc tests
[    3.674976] mmc0: no vqmmc regulator found
[    3.681368] mmc0: no vmmc regulator found
[    3.689090] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    3.704225] mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA
[    3.722819] BTRFS: selftest: Running btrfs_get_extent tests
[    3.724035] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    3.739759] BTRFS: selftest: Running hole first btrfs_get_extent test
[    3.855382] usb 3-2: New USB device found, idVendor=17ef, idProduct=1000
[    3.865204] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.877459] hub 3-2:1.0: USB hub found
[    3.879790] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.896377] hub 3-2:1.0: 4 ports detected
[    4.007354] random: init urandom read with 99 bits of entropy available
[    4.017031] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[    4.033163] firewire_core 0000:05:00.1: created device fw0: GUID 0000000000000000, S400
[    4.180046] random: nonblocking pool is initialized
[    4.187728] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2110
[    4.197141] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.207633] usb 4-1: Product: BCM2045B
[    4.213263] Adding 3906556k swap on /dev/sda2.  Priority:-1 extents:1 across:3906556k SS
[    4.226100] usb 4-1: Manufacturer: Broadcom Corp
[    4.263445] udevd[429]: starting version 175
[    4.325739] lp: driver loaded but no devices found
[    4.338048] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[    4.390468] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.390473] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    4.390725] ACPI: processor limited to max C-state 2
[    4.391342] Monitor-Mwait will be used to enter C-1 state
[    4.395666] ACPI Warning: SystemIO range 0x00000528-0x0000052f conflicts with OpRegion 0x00000500-0x0000057f (\PMIO) (20131218/utaddress-258)
[    4.395680] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.395685] ACPI Warning: SystemIO range 0x000004b0-0x000004bf conflicts with OpRegion 0x00000480-0x000004bb (\GPIO) (20131218/utaddress-258)
[    4.395693] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.395696] ACPI Warning: SystemIO range 0x00000480-0x000004af conflicts with OpRegion 0x00000480-0x000004bb (\GPIO) (20131218/utaddress-258)
[    4.395703] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.395706] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.395734] tsc: Marking TSC unstable due to TSC halts in idle
[    4.395779] ACPI: acpi_idle registered with cpuidle
[    4.396121] ehci-pci: EHCI PCI platform driver
[    4.398049] Switched to clocksource hpet
[    4.417648] ACPI: AC Adapter [AC] (on-line)
[    4.418336] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20131218/ac-77)
[    4.431324] cfg80211: Calling CRDA to update world regulatory domain
[    4.431907] yenta_cardbus 0000:05:00.0: CardBus bridge found [0000:0000]
[    4.444525] usb 3-2: USB disconnect, device number 2
[    4.483760] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    4.504222] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
[    4.504229] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.504233] usb 4-2: Product: Biometric Coprocessor
[    4.504237] usb 4-2: Manufacturer: STMicroelectronics
[    4.509093] usb 4-1: USB disconnect, device number 2
[    4.509713] usb 4-2: USB disconnect, device number 3
[    4.511294] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    4.511313] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    4.511337] ehci-pci 0000:00:1d.7: debug port 1
[    4.515268] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    4.515286] ehci-pci 0000:00:1d.7: irq 19, io mem 0xe4444000
[    4.521037] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.521113] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    4.521118] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.521122] usb usb5: Product: EHCI Host Controller
[    4.521125] usb usb5: Manufacturer: Linux 3.14.4-gnuowen ehci_hcd
[    4.521129] usb usb5: SerialNumber: 0000:00:1d.7
[    4.521572] hub 5-0:1.0: USB hub found
[    4.521586] hub 5-0:1.0: 8 ports detected
[    4.555997] yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0ca8, PCI irq 16
[    4.556019] yenta_cardbus 0000:05:00.0: Socket status: 30000006
[    4.556025] pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #06 to #09
[    4.556039] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [io  0x2000-0x3fff]
[    4.556044] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe20fffff]
[    4.556049] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe20fffff:
[    4.556063]  excluding 0xe1ef0000-0xe20fffff
[    4.556069] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe2100000-0xe40fffff 64bit pref]
[    4.556074] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe2100000-0xe40fffff:
[    4.556109]  excluding 0xe2100000-0xe40fffff
[    4.571697] hub 1-0:1.0: USB hub found
[    4.571725] hub 1-0:1.0: 2 ports detected
[    4.593186] hub 2-0:1.0: USB hub found
[    4.593203] hub 2-0:1.0: 2 ports detected
[    4.607470] ACPI: Battery Slot [BAT0] (battery absent)
[    4.607586] ACPI: Battery Slot [BAT1] (battery absent)
[    4.618112] hub 3-0:1.0: USB hub found
[    4.618243] hub 3-0:1.0: 2 ports detected
[    4.620793] ath: phy0: Enable LNA combining
[    4.622361] ath: EEPROM regdomain: 0x60
[    4.622364] ath: EEPROM indicates we should expect a direct regpair map
[    4.622368] ath: Country alpha2 being used: 00
[    4.622370] ath: Regpair used: 0x60
[    4.628859] Non-volatile memory driver v1.3
[    4.643845] hub 4-0:1.0: USB hub found
[    4.643864] hub 4-0:1.0: 2 ports detected
[    4.644115] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    4.644119] thinkpad_acpi: http://ibm-acpi.sf.net/
[    4.644121] thinkpad_acpi: ThinkPad BIOS CBET4000 7BETC7WW (2.08 ), EC 7BHT37WW-3.4
[    4.644124] thinkpad_acpi: Lenovo ThinkPad X60, model 1703WMF
[    4.673309] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    4.681203] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.682073] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf92a0000, irq=17
[    4.702639] ppdev: user-space parallel port driver
[    4.707440] parport0: PC-style at 0x3bc (0x7bc)
[    4.725085] Bluetooth: Core ver 2.18
[    4.725111] NET: Registered protocol family 31
[    4.725114] Bluetooth: HCI device and connection manager initialized
[    4.725124] Bluetooth: HCI socket layer initialized
[    4.725128] Bluetooth: L2CAP socket layer initialized
[    4.725143] Bluetooth: SCO socket layer initialized
[    4.741337] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.741343] Bluetooth: BNEP filters: protocol multicast
[    4.741354] Bluetooth: BNEP socket layer initialized
[    4.746957] usbcore: registered new interface driver btusb
[    4.747155] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    4.756490] Bluetooth: RFCOMM TTY layer initialized
[    4.756504] Bluetooth: RFCOMM socket layer initialized
[    4.756513] Bluetooth: RFCOMM ver 1.11
[    4.780058] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[    4.824060] usb 5-6: new high-speed USB device number 2 using ehci-pci
[    4.829535]  [PCSPP,TRISTATE]
[    4.829544] parport0: irq 7 detected
[    4.863916] init: failsafe main process (671) killed by TERM signal
[    4.913775] lp0: using parport0 (polling).
[    4.913777] lp0: console ready
[    4.938470] usb 5-6: New USB device found, idVendor=17ef, idProduct=1000
[    4.938476] usb 5-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.938772] hub 5-6:1.0: USB hub found
[    4.938840] hub 5-6:1.0: 4 ports detected
[    5.120101] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    5.184473] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[    5.184536] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    5.185278] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
