[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14.4-gnuowen (sam@judas) (gcc version 4.8.2 (Debian 4.8.2-16) ) #19 SMP PREEMPT Fri May 23 08:56:34 MDT 2014
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000bf6cffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf6d0000-0x00000000bf7fffff] type 16
[    0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 1703WMF/1703WMF, BIOS CBET4000 7BETC7WW (2.08 ) 06/04/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xbf6d0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 080000000 write-back
[    0.000000]   1 base 080000000 mask 0C0000000 write-back
[    0.000000]   2 base 0BF800000 mask 0FF800000 uncachable
[    0.000000]   3 base 0D0000000 mask 0F0000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] found SMP MP-table at [mem 0x000f0400-0x000f040f] mapped at [c00f0400]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x36400000-0x367fffff]
[    0.000000]  [mem 0x36400000-0x367fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x30000000-0x363fffff]
[    0.000000]  [mem 0x30000000-0x363fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x2fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x36800000-0x377fdfff]
[    0.000000]  [mem 0x36800000-0x373fffff] page 2M
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] BRK [0x017cb000, 0x017cbfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36bca000-0x375dcfff]
[    0.000000] ACPI: RSDP 000f0800 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT bf6e28e0 00004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET bf6e2a10 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC bf6e2a50 000068 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: MCFG bf6e2ac0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP bf6e5d10 0000F4 (v03 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT bf6e2b40 0030CA (v03 COREv4 COREBOOT 20090419 INTL 20140114)
[    0.000000] ACPI: FACS bf6e2b00 000040
[    0.000000] ACPI: SSDT bf6e5e10 0002FC (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2174MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] BRK [0x017cc000, 0x017ccfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0xbf6cffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009ffff]
[    0.000000]   node   0: [mem 0x00100000-0xbf6cffff]
[    0.000000] On node 0 totalpages: 783983
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4350 pages used for memmap
[    0.000000]   HighMem zone: 556754 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f55b0000 s31360 r0 d21888 u53248
[    0.000000] pcpu-alloc: s31360 r0 d21888 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 782207
[    0.000000] Kernel command line: BOOT_IMAGE=(ahci0,1)/boot/vmlinuz-3.14.4-gnuowen root=/dev/sda1 processor.max_cstate=2 drm.debug=0x06 console=tty0 console=ttyS0,115200n8
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:000bf6d0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 3092004K/3135932K available (4113K kernel code, 324K rwdata, 1560K rodata, 480K init, 1448K bss, 43928K reserved, 2227016K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff8e000 - 0xfffff000   ( 452 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc15de000 - 0xc1656000   ( 480 kB)
[    0.000000]       .data : 0xc14049c3 - 0xc15dd200   (1890 kB)
[    0.000000]       .text : 0xc1000000 - 0xc14049c3   (4114 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 6291456 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1662.394 MHz processor
[    0.002011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.78 BogoMIPS (lpj=1662394)
[    0.004005] pid_max: default: 32768 minimum: 301
[    0.005017] ACPI: Core revision 20131218
[    0.009344] ACPI: All ACPI Tables successfully acquired
[    0.012050] Security Framework initialized
[    0.013008] SELinux:  Disabled at boot.
[    0.014020] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.015006] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.016284] Initializing cgroup subsys memory
[    0.017010] Initializing cgroup subsys devices
[    0.018005] Initializing cgroup subsys freezer
[    0.019005] Initializing cgroup subsys net_cls
[    0.020004] Initializing cgroup subsys blkio
[    0.021004] Initializing cgroup subsys perf_event
[    0.022032] Disabled fast string operations
[    0.023008] CPU: Physical Processor ID: 0
[    0.024004] CPU: Processor Core ID: 0
[    0.025005] mce: CPU supports 6 MCE banks
[    0.026013] CPU0: Thermal monitoring enabled (TM2)
[    0.027015] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.027015] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[    0.027015] tlb_flushall_shift: 6
[    0.029030] Freeing SMP alternatives memory: 12K (c1656000 - c1659000)
[    0.030075] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.031420] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.042496] smpboot: CPU0: Intel(R) Core(TM) Duo CPU      L2400  @ 1.66GHz (fam: 06, model: 0e, stepping: 0c)
[    0.047000] Performance Events: Core events, core PMU driver.
[    0.049003] ... version:                1
[    0.050002] ... bit width:              40
[    0.051002] ... generic registers:      2
[    0.052002] ... value mask:             000000ffffffffff
[    0.053002] ... max period:             000000007fffffff
[    0.054002] ... fixed-purpose events:   0
[    0.055002] ... event mask:             0000000000000003
[    0.062082] CPU 1 irqstacks, hard=f4aa4000 soft=f4aa6000
[    0.062085] x86: Booting SMP configuration:
[    0.063004] .... node  #0, CPUs:      #1
[    0.003000] Initializing CPU#1
[    0.003000] Disabled fast string operations
[    0.084090] x86: Booted up 1 node, 2 CPUs
[    0.085004] smpboot: Total of 2 processors activated (6649.57 BogoMIPS)
[    0.088135] devtmpfs: initialized
[    0.092423] regulator-dummy: no parameters
[    0.096082] NET: Registered protocol family 16
[    0.101199] cpuidle: using governor ladder
[    0.105003] cpuidle: using governor menu
[    0.109084] ACPI: bus type PCI registered
[    0.113076] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.123004] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.129002] PCI: Using MMCONFIG for extended config space
[    0.135002] PCI: Using configuration type 1 for base access
[    0.143024] bio: create slab <bio-0> at 0
[    0.144064] ACPI: Added _OSI(Module Device)
[    0.145003] ACPI: Added _OSI(Processor Device)
[    0.146002] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.147002] ACPI: Added _OSI(Processor Aggregator Device)
[    0.152706] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.154195] ACPI: Interpreter enabled
[    0.155014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    0.158003] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    0.161019] ACPI: (supports S0 S3 S4 S5)
[    0.162002] ACPI: Using IOAPIC for interrupt routing
[    0.163039] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.164318] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.174701] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.175010] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.176116] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.177137] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.178052] PCI host bridge to bus 0000:00
[    0.179005] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.180004] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.181004] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.182004] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.183004] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.184004] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.185004] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.186004] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.187004] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.188004] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.189004] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.190004] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.191004] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.192004] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.193004] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.194004] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.195004] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.196004] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[    0.197004] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.199009] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[    0.199168] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[    0.199184] pci 0000:00:02.0: reg 0x10: [mem 0xe4300000-0xe437ffff]
[    0.199192] pci 0000:00:02.0: reg 0x14: [io  0x50a0-0x50a7]
[    0.199202] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[    0.199210] pci 0000:00:02.0: reg 0x1c: [mem 0xe4400000-0xe443ffff]
[    0.199355] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.199368] pci 0000:00:02.1: reg 0x10: [mem 0xe4380000-0xe43fffff]
[    0.199573] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.199600] pci 0000:00:1b.0: reg 0x10: [mem 0xe4440000-0xe4443fff 64bit]
[    0.199719] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.199792] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.200078] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.200204] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.200353] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.200482] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.201094] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.201209] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.201353] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.201467] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.201613] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.201672] pci 0000:00:1d.0: reg 0x20: [io  0x5000-0x501f]
[    0.201782] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.202074] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.202133] pci 0000:00:1d.1: reg 0x20: [io  0x5020-0x503f]
[    0.202241] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.203074] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.203133] pci 0000:00:1d.2: reg 0x20: [io  0x5040-0x505f]
[    0.203240] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.204071] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.204130] pci 0000:00:1d.3: reg 0x20: [io  0x5060-0x507f]
[    0.204237] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.205087] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.205114] pci 0000:00:1d.7: reg 0x10: [mem 0xe4444000-0xe44443ff]
[    0.205225] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.205293] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.206078] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.206267] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.206386] pci 0000:00:1f.0: address space collision: [io  0x0500-0x057f] conflicts with ACPI CPU throttle [??? 0x00000510-0x00000515 flags 0x80000000]
[    0.207009] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.208006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[    0.209005] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[    0.210005] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[    0.212157] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.212176] pci 0000:00:1f.1: reg 0x10: [io  0x50a8-0x50af]
[    0.212190] pci 0000:00:1f.1: reg 0x14: [io  0x50c8-0x50cb]
[    0.212204] pci 0000:00:1f.1: reg 0x18: [io  0x50b0-0x50b7]
[    0.212218] pci 0000:00:1f.1: reg 0x1c: [io  0x50cc-0x50cf]
[    0.212232] pci 0000:00:1f.1: reg 0x20: [io  0x5080-0x508f]
[    0.212380] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[    0.212406] pci 0000:00:1f.2: reg 0x10: [io  0x50b8-0x50bf]
[    0.212420] pci 0000:00:1f.2: reg 0x14: [io  0x50d0-0x50d3]
[    0.212434] pci 0000:00:1f.2: reg 0x18: [io  0x50c0-0x50c7]
[    0.212448] pci 0000:00:1f.2: reg 0x1c: [io  0x50d4-0x50d7]
[    0.212462] pci 0000:00:1f.2: reg 0x20: [io  0x5090-0x509f]
[    0.212477] pci 0000:00:1f.2: reg 0x24: [mem 0xe4444400-0xe44447ff]
[    0.212538] pci 0000:00:1f.2: PME# supported from D3hot
[    0.212671] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.212747] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.213015] pci 0000:01:00.0: [8086:109a] type 00 class 0x020000
[    0.213050] pci 0000:01:00.0: reg 0x10: [mem 0xe4100000-0xe411ffff]
[    0.213094] pci 0000:01:00.0: reg 0x18: [io  0x4000-0x401f]
[    0.213297] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.213398] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.214021] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.215007] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.215014] pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.215138] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.215172] pci 0000:02:00.0: reg 0x10: [mem 0xe4200000-0xe420ffff 64bit]
[    0.215351] pci 0000:02:00.0: supports D1
[    0.215355] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.217021] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.219005] pci 0000:00:1c.1:   bridge window [mem 0xe4200000-0xe42fffff]
[    0.219102] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.220100] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.221084] pci 0000:05:00.0: [1180:0476] type 02 class 0x060700
[    0.221111] pci 0000:05:00.0: reg 0x10: [mem 0xe2000000-0xe2000fff]
[    0.221152] pci 0000:05:00.0: supports D1 D2
[    0.221156] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.221195] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.223080] pci 0000:05:00.1: [1180:0552] type 00 class 0x0c0010
[    0.223106] pci 0000:05:00.1: reg 0x10: [mem 0xe2001000-0xe20017ff]
[    0.223209] pci 0000:05:00.1: supports D1 D2
[    0.223213] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.223313] pci 0000:05:00.2: [1180:0822] type 00 class 0x080500
[    0.223337] pci 0000:05:00.2: reg 0x10: [mem 0xe2001800-0xe20018ff]
[    0.223440] pci 0000:05:00.2: supports D1 D2
[    0.223443] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.223599] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
[    0.224008] pci 0000:00:1e.0:   bridge window [io  0x2000-0x3fff]
[    0.224015] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe20fffff]
[    0.224025] pci 0000:00:1e.0:   bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.224029] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.224033] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.224038] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.224042] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[    0.224046] pci 0000:00:1e.0:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[    0.224050] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[    0.224055] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
[    0.224059] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.224063] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.224067] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.224072] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.224076] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.224080] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.224084] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[    0.224089] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[    0.224093] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[    0.224097] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    0.224101] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.224170] pci_bus 0000:06: busn_res: can not insert [bus 06-ff] under [bus 05-06] (conflicts with (null) [bus 05-06])
[    0.224178] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
[    0.224183] pci_bus 0000:06: busn_res: can not insert [bus 06-09] under [bus 05-06] (conflicts with (null) [bus 05-06])
[    0.224190] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05-06]
[    0.225045] pci_bus 0000:00: on NUMA node 0
[    0.225167] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.230008] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.234277] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.238748] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.242275] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.246757] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.250076] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.254762] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.258297] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.259077] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.260010] vgaarb: loaded
[    0.261002] vgaarb: bridge control possible 0000:00:02.0
[    0.262136] SCSI subsystem initialized
[    0.263037] libata version 3.00 loaded.
[    0.263072] PCI: Using ACPI for IRQ routing
[    0.266520] PCI: pci_cache_line_size set to 64 bytes
[    0.266613] e820: reserve RAM buffer [mem 0xbf6d0000-0xbfffffff]
[    0.266869] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.267008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.269773] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.272028] Switched to clocksource hpet
[    0.281403] pnp: PnP ACPI init
[    0.284502] ACPI: bus type PNP registered
[    0.288660] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.295293] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.301920] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.308550] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.315178] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.321801] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.328430] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.335058] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.341681] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.342221] pnp 00:01: [dma 4]
[    0.342271] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.342326] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.342485] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.349119] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.349192] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.349283] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.355221] system 00:05: [io  0x0500-0x057f] could not be reserved
[    0.361498] system 00:05: [io  0x0480-0x04bf] has been reserved
[    0.367428] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.367489] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.367567] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.367638] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.367686] pnp: PnP ACPI: found 9 devices
[    0.371793] ACPI: bus type PNP unregistered
[    0.414640] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.414691] pci 0000:00:1f.0: BAR 13: [io  0x0500-0x057f] has bogus alignment
[    0.421845] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.421861] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.429704] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.434684] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.440790] pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.447592] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.455353] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.460339] pci 0000:00:1c.1:   bridge window [mem 0xe4200000-0xe42fffff]
[    0.467148] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.472141] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.477137] pci 0000:05:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.477142] pci 0000:05:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.477147] pci 0000:05:00.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.477151] pci 0000:05:00.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.477166] pci 0000:05:00.0: BAR 15: assigned [mem 0xc4000000-0xc7ffffff pref]
[    0.484499] pci 0000:05:00.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
[    0.491388] pci 0000:05:00.0: BAR 13: assigned [io  0x2000-0x20ff]
[    0.497584] pci 0000:05:00.0: BAR 14: assigned [io  0x2400-0x24ff]
[    0.503780] pci 0000:05:00.0: CardBus bridge to [bus 06-09]
[    0.509368] pci 0000:05:00.0:   bridge window [io  0x2000-0x20ff]
[    0.515472] pci 0000:05:00.0:   bridge window [io  0x2400-0x24ff]
[    0.521582] pci 0000:05:00.0:   bridge window [mem 0xc4000000-0xc7ffffff pref]
[    0.528822] pci 0000:05:00.0:   bridge window [mem 0xc8000000-0xcbffffff]
[    0.535623] pci 0000:00:1e.0: PCI bridge to [bus 05-06]
[    0.540861] pci 0000:00:1e.0:   bridge window [io  0x2000-0x3fff]
[    0.546966] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe20fffff]
[    0.553770] pci 0000:00:1e.0:   bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.561531] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.561536] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.561540] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.561544] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.561548] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.561552] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.561556] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.561560] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.561564] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.561568] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.561572] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.561576] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.561580] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.561584] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.561588] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.561592] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.561596] pci_bus 0000:00: resource 20 [mem 0xc0000000-0xfebfffff]
[    0.561600] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.561605] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.561609] pci_bus 0000:01: resource 1 [mem 0xe4100000-0xe41fffff]
[    0.561613] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[    0.561617] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe42fffff]
[    0.561621] pci_bus 0000:05: resource 0 [io  0x2000-0x3fff]
[    0.561625] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe20fffff]
[    0.561630] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.561634] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.561638] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.561642] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.561646] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.561650] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.561654] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.561658] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff]
[    0.561662] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.561666] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.561670] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.561674] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
[    0.561678] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.561682] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.561686] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.561691] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff]
[    0.561695] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff]
[    0.561699] pci_bus 0000:05: resource 20 [mem 0xc0000000-0xfebfffff]
[    0.561703] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.561707] pci_bus 0000:06: resource 0 [io  0x2000-0x20ff]
[    0.561711] pci_bus 0000:06: resource 1 [io  0x2400-0x24ff]
[    0.561715] pci_bus 0000:06: resource 2 [mem 0xc4000000-0xc7ffffff pref]
[    0.561719] pci_bus 0000:06: resource 3 [mem 0xc8000000-0xcbffffff]
[    0.561765] NET: Registered protocol family 2
[    0.566345] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.573432] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.579930] TCP: Hash tables configured (established 8192 bind 8192)
[    0.586332] TCP: reno registered
[    0.589576] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.595522] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.601966] NET: Registered protocol family 1
[    0.606353] pci 0000:00:02.0: Boot video device
[    0.607649] PCI: CLS 64 bytes, default 64
[    0.607716] Unpacking initramfs...
[    0.957273] Freeing initrd memory: 10316K (f6bca000 - f75dd000)
[    0.963864] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.970029] audit: initializing netlink subsys (disabled)
[    0.975467] audit: type=2000 audit(1401888356.974:1): initialized
[    0.981975] bounce pool size: 64 pages
[    0.985744] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.995583] VFS: Disk quotas dquot_6.5.2
[    0.999615] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.006959] msgmni has been set to 1709
[    1.011305] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.018717] io scheduler noop registered
[    1.022657] io scheduler deadline registered
[    1.027075] io scheduler cfq registered (default)
[    1.032132] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.032431] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    1.032698] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    1.032963] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    1.033159] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.040137] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.046682] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    1.046714] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    1.053691] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.060235] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    1.060270] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    1.067248] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    1.067280] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    1.074260] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    1.074319] intel_idle: does not run on family 6 model 14
[    1.074439] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0E:00/input/input0
[    1.085414] ACPI: Sleep Button [SLPB]
[    1.089190] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0D:00/input/input1
[    1.100116] ACPI: Lid Switch [LID]
[    1.103635] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.111046] ACPI: Power Button [PWRF]
[    1.115013] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.122085] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.131165] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.158309] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.166714] Linux agpgart interface v0.103
[    1.170881] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    1.176509] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.185508] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.192071] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.198936] [drm] Initialized drm 1.1.0 20060810
[    1.204138] [drm:i915_dump_device_info], i915 device info: gen=3, pciid=0x27a2 flags=is_mobile,is_i945gm,has_fbc,has_hotplug,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,
[    1.204194] [drm:intel_detect_pch], No PCH found.
[    1.204199] [drm] Memory usable by graphics device = 256M
[    1.209612] [drm:i915_gem_gtt_init], GMADR size = 256M
[    1.209615] [drm:i915_gem_gtt_init], GTT stolen size = 8M
[    1.209879] [drm:intel_opregion_setup], graphic opregion physical addr: 0x0
[    1.209882] [drm:intel_opregion_setup], ACPI OpRegion not supported!
[    1.209909] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.216538] [drm] Driver supports precise vblank timestamp query.
[    1.222645] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz
[    1.222650] i915 0000:00:02.0: Invalid ROM contents
[    1.227541] [drm:intel_parse_bios], VBT signature missing
[    1.227543] [drm] failed to find VBIOS tables
[    1.231920] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[    1.231931] [drm:i915_gem_init_stolen], found 8388608 bytes of stolen memory at bf800000
[    1.231967] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[    1.232910] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[    1.232910] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[    1.232910] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[    1.232910] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[    1.232910] i915: render error detected, EIR: 0x00000010
[    1.232910] i915: page table error
[    1.232910] i915:   PGTBL_ER: 0x00000012
[    1.232910] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[    1.232910] i915: render error detected, EIR: 0x00000010
[    1.232910] i915: page table error
[    1.232910] i915:   PGTBL_ER: 0x00000012
[    1.307938] [drm:intel_modeset_init], 2 display pipes available.
[    1.307946] [drm:intel_crtc_init], swapping pipes & planes for FBC
[    1.307949] [drm:intel_modeset_init], pipe A sprite A init failed: -19
[    1.307955] [drm:intel_crtc_init], swapping pipes & planes for FBC
[    1.307958] [drm:intel_modeset_init], pipe B sprite B init failed: -19
[    1.307965] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.368014] [drm] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
[    1.405116] [drm:intel_lvds_init], using preferred mode from EDID: 
[    1.405122] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    1.405127] [drm:intel_lvds_init], detected single-link lvds configuration
[    1.405174] [drm:intel_panel_setup_backlight], failed to setup backlight for connector LVDS-1
[    1.405285] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, ffff000]
[    1.407681] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[    1.407686] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
[    1.407815] [drm] initialized overlay support
[    1.412194] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
[    1.412203] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled
[    1.412208] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B
[    1.412213] [drm:intel_modeset_readout_hw_state], [ENCODER:17:DAC-17] hw state readout: disabled, pipe A
[    1.412217] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TV-19] hw state readout: disabled, pipe A
[    1.412222] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled
[    1.412226] [drm:intel_modeset_readout_hw_state], [CONNECTOR:16:VGA-1] hw state readout: disabled
[    1.412230] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:SVIDEO-1] hw state readout: disabled
[    1.412236] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[    1.412239] [drm:intel_dump_pipe_config], cpu_transcoder: A
[    1.412242] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[    1.412246] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.412250] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.412253] [drm:intel_dump_pipe_config], requested mode:
[    1.412258] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    1.412261] [drm:intel_dump_pipe_config], adjusted mode:
[    1.412265] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    1.412270] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[    1.412273] [drm:intel_dump_pipe_config], port clock: 0
[    1.412276] [drm:intel_dump_pipe_config], pipe src size: 0x0
[    1.412280] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    1.412283] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    1.412286] [drm:intel_dump_pipe_config], ips: 0
[    1.412289] [drm:intel_dump_pipe_config], double wide: 0
[    1.412293] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
[    1.412296] [drm:intel_dump_pipe_config], cpu_transcoder: B
[    1.412299] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[    1.412303] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.412307] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.412310] [drm:intel_dump_pipe_config], requested mode:
[    1.412315] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1024 0 0 0 768 0 0 0 0x0 0x0
[    1.412318] [drm:intel_dump_pipe_config], adjusted mode:
[    1.412323] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[    1.412328] [drm:intel_dump_crtc_timings], crtc timings: 54167 1024 1048 1184 1344 768 771 777 806, type: 0x0 flags: 0xa
[    1.412331] [drm:intel_dump_pipe_config], port clock: 54167
[    1.412334] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[    1.412337] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[    1.412341] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    1.412344] [drm:intel_dump_pipe_config], ips: 0
[    1.412347] [drm:intel_dump_pipe_config], double wide: 0
[    1.412351] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    1.412355] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    1.412359] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    1.412363] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    1.412367] [drm:check_crtc_state], [CRTC:3]
[    1.412370] [drm:check_crtc_state], [CRTC:4]
[    1.412387] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    1.412390] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[    1.412405] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    1.412411] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    1.412417] [drm:drm_mode_debug_printmodeline], Modeline 12:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    1.412423] [drm:drm_mode_debug_printmodeline], Modeline 9:"1024x768" 40 43330 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    1.412428] [drm:drm_mode_debug_printmodeline], Modeline 10:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    1.412434] [drm:drm_mode_debug_printmodeline], Modeline 11:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    1.412438] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:VGA-1]
[    1.412442] [drm:intel_crt_detect], [CONNECTOR:16:VGA-1] force=1
[    1.424017] [drm:intel_crt_detect], CRT not detected via hotplug
[    1.475013] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[    1.483386] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    1.483390] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[    1.483394] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:VGA-1] disconnected
[    1.483398] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:SVIDEO-1]
[    1.483402] [drm:intel_tv_detect], [CONNECTOR:18:SVIDEO-1] force=1
[    1.483406] [drm:intel_get_load_detect_pipe], [CONNECTOR:18:SVIDEO-1], [ENCODER:19:TV-19]
[    1.483410] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[    1.483421] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    1.483426] [drm:connected_sink_compute_bpp], [CONNECTOR:18:SVIDEO-1] checking for sink bpp constrains
[    1.483429] [drm:intel_tv_compute_config], forcing bpc to 8 for TV
[    1.483433] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[    1.483437] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[    1.483440] [drm:intel_dump_pipe_config], cpu_transcoder: A
[    1.483443] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[    1.483447] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.483451] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.483454] [drm:intel_dump_pipe_config], requested mode:
[    1.483459] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[    1.483462] [drm:intel_dump_pipe_config], adjusted mode:
[    1.483467] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[    1.483472] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
[    1.483476] [drm:intel_dump_pipe_config], port clock: 108000
[    1.483479] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
[    1.483482] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    1.483486] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    1.483489] [drm:intel_dump_pipe_config], ips: 0
[    1.483492] [drm:intel_dump_pipe_config], double wide: 0
[    1.490954] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 5120
[    1.490961] [drm:intel_update_fbc], no output, disabling
[    1.490968] [drm:intel_crtc_mode_set], [ENCODER:19:TV-19] set [MODE:0:NTSC 480i]
[    1.496740] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    1.496744] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    1.496747] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[    1.496750] [drm:intel_calculate_wm], FIFO watermark level: -5
[    1.496753] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[    1.496757] [drm:i9xx_update_wm], self-refresh entries: 80
[    1.496760] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 47
[    1.496763] [drm:i9xx_update_wm], memory self refresh enabled
[    1.528018] [drm:intel_update_fbc], disabled per chip default
[    1.528026] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    1.528031] [drm:intel_connector_check_state], [CONNECTOR:18:SVIDEO-1]
[    1.528035] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    1.528039] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    1.528042] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    1.528046] [drm:check_crtc_state], [CRTC:3]
[    1.528057] [drm:check_crtc_state], [CRTC:4]
[    1.562017] [drm:intel_tv_detect_type], TV detected: c0007, 7f0000aa
[    1.562020] [drm:intel_tv_detect_type], Unrecognised TV connection
[    1.594018] [drm:intel_release_load_detect_pipe], [CONNECTOR:18:SVIDEO-1], [ENCODER:19:TV-19]
[    1.594022] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[    1.636019] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    1.636023] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    1.636026] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[    1.636030] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[    1.636033] [drm:i9xx_update_wm], memory self refresh disabled
[    1.636036] [drm:intel_update_fbc], no output, disabling
[    1.636042] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    1.636047] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    1.636050] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    1.636054] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    1.636057] [drm:check_crtc_state], [CRTC:3]
[    1.636061] [drm:check_crtc_state], [CRTC:4]
[    1.636241] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:SVIDEO-1] disconnected
[    1.636246] [drm:drm_setup_crtcs], 
[    1.636250] [drm:drm_enable_connectors], connector 5 enabled? yes
[    1.636253] [drm:drm_enable_connectors], connector 16 enabled? no
[    1.636256] [drm:drm_enable_connectors], connector 18 enabled? no
[    1.636259] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[    1.636263] [drm:drm_target_preferred], looking for preferred mode on connector 5
[    1.636266] [drm:drm_target_preferred], found mode 1024x768
[    1.636269] [drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
[    1.636273] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 4
[    1.636278] [drm:intelfb_create], no BIOS fb, allocating a new one
[    1.636282] [drm:i915_gem_object_create_stolen], creating stolen object: size=300000
[    1.636286] [drm:i915_pages_create_for_stolen], offset=0x20000, size=3145728
[    1.638634] [drm:intelfb_create], allocated 1024x768 fb: 0x00020000, bo f4488900
[    1.638748] fbcon: inteldrmfb (fb0) is primary device
[    1.638800] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
[    1.638803] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    1.638806] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.638809] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    1.638811] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[    1.638812] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[    1.638816] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    1.638820] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    1.638822] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
[    1.638825] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.638829] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[    1.638832] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
[    1.638835] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
[    1.638839] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[    1.638841] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
[    1.638842] [drm:intel_dump_pipe_config], cpu_transcoder: B
[    1.638844] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[    1.638847] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.638849] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    1.638850] [drm:intel_dump_pipe_config], requested mode:
[    1.638854] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    1.638855] [drm:intel_dump_pipe_config], adjusted mode:
[    1.638859] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    1.638863] [drm:intel_dump_crtc_timings], crtc timings: 54160 1024 1048 1184 1344 768 771 777 806, type: 0x48 flags: 0xa
[    1.638864] [drm:intel_dump_pipe_config], port clock: 54160
[    1.638866] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[    1.638868] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[    1.638870] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    1.638872] [drm:intel_dump_pipe_config], ips: 0
[    1.638873] [drm:intel_dump_pipe_config], double wide: 0
[    1.910019] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000008
[    1.910022] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    1.910024] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    1.910026] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[    1.910028] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[    1.910030] [drm:i9xx_update_wm], memory self refresh disabled
[    1.910035] [drm:i9xx_get_refclk], using SSC reference clock of 100000 kHz
[    1.910244] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 4096
[    1.910248] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x768]
[    1.910890] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    1.910891] [drm:intel_calculate_wm], FIFO entries required for mode: 17
[    1.910893] [drm:intel_calculate_wm], FIFO watermark level: 9
[    1.910895] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    1.910897] [drm:i9xx_update_wm], FIFO watermarks - A: 9, B: 29
[    1.910898] [drm:i9xx_update_wm], self-refresh entries: 64
[    1.910900] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 9, B: 29, C: 2, SR 63
[    1.910902] [drm:i9xx_update_wm], memory self refresh enabled
[    1.932016] [drm:intel_update_fbc], disabled per chip default
[    1.965018] tsc: Refined TSC clocksource calibration: 1662.499 MHz
[    2.274018] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    2.274022] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    2.274024] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    2.274026] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    2.274028] [drm:check_crtc_state], [CRTC:3]
[    2.274030] [drm:check_crtc_state], [CRTC:4]
[    2.274060] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    2.274062] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    2.274065] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.279446] Console: switching to colour frame buffer device 128x48
[    2.279452] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    2.279454] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    2.279457] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    2.302235] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.308487] i915 0000:00:02.0: registered panic notifier
[    2.313878] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.321286] ahci 0000:00:1f.2: version 3.0
[    2.321493] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    2.321533] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.328255] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[    2.336619] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    2.345469] scsi0 : ahci
[    2.348236] scsi1 : ahci
[    2.350979] scsi2 : ahci
[    2.353729] scsi3 : ahci
[    2.356393] ata1: SATA max UDMA/133 abar m1024@0xe4444400 port 0xe4444500 irq 44
[    2.363879] ata2: DUMMY
[    2.366364] ata3: DUMMY
[    2.368849] ata4: DUMMY
[    2.371468] ata_piix 0000:00:1f.1: version 2.13
[    2.372233] scsi4 : ata_piix
[    2.375341] scsi5 : ata_piix
[    2.380473] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14
[    2.389665] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15
[    2.398915] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.409341] ata6: port disabled--ignoring
[    2.420294] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.427453] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.434779] mousedev: PS/2 mouse device common for all mice
[    2.442506] rtc_cmos 00:06: RTC can wake from S4
[    2.449389] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.457568] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.467441] device-mapper: uevent: version 1.0.3
[    2.474250] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    2.484997] TCP: cubic registered
[    2.490672] NET: Registered protocol family 10
[    2.497555] mip6: Mobile IPv6
[    2.502626] NET: Registered protocol family 17
[    2.509240] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.520032] Key type dns_resolver registered
[    2.526713] Using IPI No-Shortcut mode
[    2.532703] registered taskstats version 1
[    2.539385] regulator-dummy: disabling
[    2.545284] rtc_cmos 00:06: setting system clock to 2014-06-04 13:26:00 UTC (1401888360)
[    2.833039] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.841565] ata1.00: ATA-7: INTEL SSDSA2M040G2GC, 2CV102M3, max UDMA/133
[    2.850352] ata1.00: 78165360 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    2.859319] ata1.00: configured for UDMA/133
[    2.865814] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2M040 2CV1 PQ: 0 ANSI: 5
[    2.876237] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    2.886032] sd 0:0:0:0: [sda] Write Protect is off
[    2.892923] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.892958] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.904908]  sda: sda1 sda2
[    2.910266] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.917655] Freeing unused kernel memory: 480K (c15de000 - c1656000)
[    2.926152] Write protecting the kernel text: 4116k
[    2.933159] Write protecting the kernel read-only data: 1564k
[    2.962195] udevd[85]: starting version 175
[    2.969448] Switched to clocksource tsc
[    2.980319] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    2.980323] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    2.980327] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    3.017859] pps_core: LinuxPPS API ver. 1 registered
[    3.025252] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.045962] PTP clock support registered
[    3.054179] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    3.062773] ACPI: bus type USB registered
[    3.089825] thermal LNXTHERM:00: registered as thermal_zone0
[    3.114758] ACPI: Thermal Zone [THM0] (47 C)
[    3.132770] usbcore: registered new interface driver usbfs
[    3.141309] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    3.141315] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    3.141318] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    3.144341] sdhci: Secure Digital Host Controller Interface driver
[    3.144342] sdhci: Copyright(c) Pierre Ossman
[    3.144677] sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 18)
[    3.144693] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[    3.145838] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    3.145845] mmc0: no vqmmc regulator found
[    3.145846] mmc0: no vmmc regulator found
[    3.146853] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    3.146980] mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA
[    3.155355] usbcore: registered new interface driver hub
[    3.156909] usbcore: registered new device driver usb
[    3.157568] uhci_hcd: USB Universal Host Controller Interface driver
[    3.157786] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.157795] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    3.157846] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000
[    3.157933] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    3.157936] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.157939] usb usb1: Product: UHCI Host Controller
[    3.157941] usb usb1: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    3.157943] usb usb1: SerialNumber: 0000:00:1d.0
[    3.158203] hub 1-0:1.0: USB hub found
[    3.158214] hub 1-0:1.0: 2 ports detected
[    3.158962] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.158970] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    3.159046] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005020
[    3.159127] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.159130] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.159132] usb usb2: Product: UHCI Host Controller
[    3.159135] usb usb2: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    3.159137] usb usb2: SerialNumber: 0000:00:1d.1
[    3.159340] hub 2-0:1.0: USB hub found
[    3.159351] hub 2-0:1.0: 2 ports detected
[    3.159658] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.159666] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    3.159707] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[    3.159783] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.159785] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.159788] usb usb3: Product: UHCI Host Controller
[    3.159790] usb usb3: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    3.159792] usb usb3: SerialNumber: 0000:00:1d.2
[    3.159968] hub 3-0:1.0: USB hub found
[    3.159979] hub 3-0:1.0: 2 ports detected
[    3.160689] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.160696] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    3.160761] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
[    3.161910] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.161913] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.161916] usb usb4: Product: UHCI Host Controller
[    3.161918] usb usb4: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    3.161920] usb usb4: SerialNumber: 0000:00:1d.3
[    3.163484] hub 4-0:1.0: USB hub found
[    3.163596] hub 4-0:1.0: 2 ports detected
[    3.167890] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    3.168231] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    3.168287] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
[    3.171747] thermal LNXTHERM:01: registered as thermal_zone1
[    3.171749] ACPI: Thermal Zone [THM1] (38 C)
[    3.190780] xor: measuring software checksum speed
[    3.211663]    pIII_sse  : 17108.000 MB/sec
[    3.259989] firewire_ohci 0000:05:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    3.273214]    prefetch64-sse: 44556.000 MB/sec
[    3.273216] xor: using function: prefetch64-sse (44556.000 MB/sec)
[    3.290330] raid6: mmxx1     1652 MB/s
[    3.322558] raid6: mmxx2     1890 MB/s
[    3.343535] raid6: sse1x1    1539 MB/s
[    3.367179] raid6: sse1x2    1855 MB/s
[    3.392679] raid6: sse2x1    2363 MB/s
[    3.416131] raid6: sse2x2    2042 MB/s
[    3.416133] raid6: using algorithm sse2x1 (2363 MB/s)
[    3.416134] raid6: using intx1 recovery algorithm
[    3.421216] bio: create slab <bio-1> at 1
[    3.425310] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:3d:c3:60
[    3.425313] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
[    3.425398] e1000e 0000:01:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005302-003
[    3.430342] Btrfs loaded
[    3.430377] BTRFS: selftest: Running btrfs free space cache tests
[    3.430378] BTRFS: selftest: Running extent only tests
[    3.430387] BTRFS: selftest: Running bitmap only tests
[    3.430397] BTRFS: selftest: Running bitmap and extent tests
[    3.430412] BTRFS: selftest: Free space cache tests finished
[    3.430414] BTRFS: selftest: Running extent buffer operation tests
[    3.430415] BTRFS: selftest: Running btrfs_split_item tests
[    3.430434] BTRFS: selftest: Running find delalloc tests
[    3.473036] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    3.577140] BTRFS: selftest: Running btrfs_get_extent tests
[    3.577254] BTRFS: selftest: Running hole first btrfs_get_extent test
[    3.631878] usb 3-2: New USB device found, idVendor=17ef, idProduct=1000
[    3.631881] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.640983] hub 3-2:1.0: USB hub found
[    3.649765] hub 3-2:1.0: 4 ports detected
[    3.800035] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[    3.810828] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.923683] random: init urandom read with 91 bits of entropy available
[    3.958515] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2110
[    3.967901] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.978026] usb 4-1: Product: BCM2045B
[    3.983935] usb 4-1: Manufacturer: Broadcom Corp
[    4.096029] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[    4.130651] random: nonblocking pool is initialized
[    4.192498] Adding 3906556k swap on /dev/sda2.  Priority:-1 extents:1 across:3906556k SS
[    4.229663] udevd[391]: starting version 175
[    4.274825] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
[    4.274832] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.274836] usb 4-2: Product: Biometric Coprocessor
[    4.274839] usb 4-2: Manufacturer: STMicroelectronics
[    4.276153] firewire_core 0000:05:00.1: created device fw0: GUID 0000000000000000, S400
[    4.310578] lp: driver loaded but no devices found
[    4.350683] ACPI: processor limited to max C-state 2
[    4.352703] Monitor-Mwait will be used to enter C-1 state
[    4.352716] tsc: Marking TSC unstable due to TSC halts in idle
[    4.352731] ACPI: acpi_idle registered with cpuidle
[    4.354047] Switched to clocksource hpet
[    4.360756] ACPI: AC Adapter [AC] (on-line)
[    4.360802] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20131218/ac-77)
[    4.405923] cfg80211: Calling CRDA to update world regulatory domain
[    4.415073] ACPI Warning: SystemIO range 0x00000528-0x0000052f conflicts with OpRegion 0x00000500-0x0000057f (\PMIO) (20131218/utaddress-258)
[    4.415085] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.415091] ACPI Warning: SystemIO range 0x000004b0-0x000004bf conflicts with OpRegion 0x00000480-0x000004bb (\GPIO) (20131218/utaddress-258)
[    4.415098] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.415101] ACPI Warning: SystemIO range 0x00000480-0x000004af conflicts with OpRegion 0x00000480-0x000004bb (\GPIO) (20131218/utaddress-258)
[    4.415108] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.415111] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.428425] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.428431] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    4.434893] ehci-pci: EHCI PCI platform driver
[    4.477082] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    4.498414] usb 3-2: USB disconnect, device number 2
[    4.498935] usb 4-1: USB disconnect, device number 2
[    4.499324] usb 4-2: USB disconnect, device number 3
[    4.499586] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    4.499599] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    4.499620] ehci-pci 0000:00:1d.7: debug port 1
[    4.504507] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    4.504522] ehci-pci 0000:00:1d.7: irq 19, io mem 0xe4444000
[    4.508179] ACPI: Battery Slot [BAT0] (battery absent)
[    4.508317] ACPI: Battery Slot [BAT1] (battery absent)
[    4.510032] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.510101] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    4.510105] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.510109] usb usb5: Product: EHCI Host Controller
[    4.510113] usb usb5: Manufacturer: Linux 3.14.4-gnuowen ehci_hcd
[    4.510117] usb usb5: SerialNumber: 0000:00:1d.7
[    4.510353] hub 5-0:1.0: USB hub found
[    4.510366] hub 5-0:1.0: 8 ports detected
[    4.531769] hub 1-0:1.0: USB hub found
[    4.531786] hub 1-0:1.0: 2 ports detected
[    4.539274] yenta_cardbus 0000:05:00.0: CardBus bridge found [0000:0000]
[    4.546576] Non-volatile memory driver v1.3
[    4.552406] hub 2-0:1.0: USB hub found
[    4.552424] hub 2-0:1.0: 2 ports detected
[    4.560570] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    4.560575] thinkpad_acpi: http://ibm-acpi.sf.net/
[    4.560578] thinkpad_acpi: ThinkPad BIOS CBET4000 7BETC7WW (2.08 ), EC 7BHT37WW-3.4
[    4.560581] thinkpad_acpi: Lenovo ThinkPad X60, model 1703WMF
[    4.562096] Bluetooth: Core ver 2.18
[    4.562120] NET: Registered protocol family 31
[    4.562123] Bluetooth: HCI device and connection manager initialized
[    4.562132] Bluetooth: HCI socket layer initialized
[    4.562136] Bluetooth: L2CAP socket layer initialized
[    4.562151] Bluetooth: SCO socket layer initialized
[    4.563707] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    4.570991] usbcore: registered new interface driver btusb
[    4.573143] hub 3-0:1.0: USB hub found
[    4.573160] hub 3-0:1.0: 2 ports detected
[    4.599396] hub 4-0:1.0: USB hub found
[    4.599414] hub 4-0:1.0: 2 ports detected
[    4.614507] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    4.623697] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[    4.675470] ppdev: user-space parallel port driver
[    4.685687] parport0: PC-style at 0x3bc (0x7bc)
[    4.687261] yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0ca8, PCI irq 16
[    4.687268] yenta_cardbus 0000:05:00.0: Socket status: 30000006
[    4.687274] pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #06 to #09
[    4.687286] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [io  0x2000-0x3fff]
[    4.687291] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe20fffff]
[    4.687296] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe20fffff:
[    4.687309]  excluding 0xe1ef0000-0xe20fffff
[    4.687316] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe2100000-0xe40fffff 64bit pref]
[    4.687321] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe2100000-0xe40fffff:
[    4.687356]  excluding 0xe2100000-0xe40fffff
[    4.696526] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.696533] Bluetooth: BNEP filters: protocol multicast
[    4.696545] Bluetooth: BNEP socket layer initialized
[    4.716052] Bluetooth: RFCOMM TTY layer initialized
[    4.716067] Bluetooth: RFCOMM socket layer initialized
[    4.716077] Bluetooth: RFCOMM ver 1.11
[    4.808186]  [PCSPP,TRISTATE]
[    4.808195] parport0: irq 7 detected
[    4.814047] usb 5-6: new high-speed USB device number 2 using ehci-pci
[    4.855348] init: failsafe main process (644) killed by TERM signal
[    4.892252] lp0: using parport0 (polling).
[    4.892258] lp0: console ready
[    4.928453] usb 5-6: New USB device found, idVendor=17ef, idProduct=1000
[    4.928460] usb 5-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.928832] hub 5-6:1.0: USB hub found
[    4.928945] hub 5-6:1.0: 4 ports detected
[    4.957182] ath: phy0: Enable LNA combining
[    4.984612] ath: EEPROM regdomain: 0x60
[    4.984618] ath: EEPROM indicates we should expect a direct regpair map
[    4.984622] ath: Country alpha2 being used: 00
[    4.984625] ath: Regpair used: 0x60
[    5.055688] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    5.086520] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.087545] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf9260000, irq=17
[    5.168311] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
[    5.213497] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[    5.213556] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    5.242259] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[    5.242290]  excluding 0xf0000-0xfffff
[    5.242318] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[    5.242356]  excluding 0xa0000000-0xa0ffffff
[    5.242381] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[    5.242419]  excluding 0x60000000-0x60ffffff
