[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14.4-gnuowen (sam@judas) (gcc version 4.8.2 (Debian 4.8.2-16) ) #19 SMP PREEMPT Fri May 23 08:56:34 MDT 2014
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000c0000-0x000000007f6cffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6d0000-0x000000007f7fffff] type 16
[    0.000000] BIOS-e820: [mem 0x000000007f800000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 1703WMF, BIOS 7BETC7WW (2.08 ) 05/30/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f6d0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 080000000 write-back
[    0.000000]   1 base 07F800000 mask 0FF800000 uncachable
[    0.000000]   2 base 0D0000000 mask 0F0000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] found SMP MP-table at [mem 0x000f0400-0x000f040f] mapped at [c00f0400]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x36400000-0x367fffff]
[    0.000000]  [mem 0x36400000-0x367fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x30000000-0x363fffff]
[    0.000000]  [mem 0x30000000-0x363fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x2fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x36800000-0x377fdfff]
[    0.000000]  [mem 0x36800000-0x373fffff] page 2M
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] BRK [0x017cb000, 0x017cbfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36bca000-0x375dcfff]
[    0.000000] ACPI: RSDP 000f0800 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 7f6e28e0 00004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 7f6e2a10 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 7f6e2a50 000068 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: MCFG 7f6e2ac0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 7f6e5d10 0000F4 (v03 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 7f6e2b40 0030CA (v03 COREv4 COREBOOT 20090419 INTL 20140114)
[    0.000000] ACPI: FACS 7f6e2b00 000040
[    0.000000] ACPI: SSDT 7f6e5e10 0002FC (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] BRK [0x017cc000, 0x017ccfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0x7f6cffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009ffff]
[    0.000000]   node   0: [mem 0x00100000-0x7f6cffff]
[    0.000000] On node 0 totalpages: 521839
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2302 pages used for memmap
[    0.000000]   HighMem zone: 294610 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xefffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f5db0000 s31360 r0 d21888 u53248
[    0.000000] pcpu-alloc: s31360 r0 d21888 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520063
[    0.000000] Kernel command line: BOOT_IMAGE=(ahci0,1)/boot/vmlinuz-3.14.4-gnuowen root=/dev/sda1 processor.max_cstate=2 drm.debug=0x06 console=tty0 console=ttyS0,115200n8
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f6d0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 2051644K/2087356K available (4113K kernel code, 324K rwdata, 1560K rodata, 480K init, 1448K bss, 35712K reserved, 1178440K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff8e000 - 0xfffff000   ( 452 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc15de000 - 0xc1656000   ( 480 kB)
[    0.000000]       .data : 0xc14049c3 - 0xc15dd200   (1890 kB)
[    0.000000]       .text : 0xc1000000 - 0xc14049c3   (4114 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1662.382 MHz processor
[    0.001011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.76 BogoMIPS (lpj=1662382)
[    0.002007] pid_max: default: 32768 minimum: 301
[    0.002244] ACPI: Core revision 20131218
[    0.005454] ACPI: All ACPI Tables successfully acquired
[    0.006051] Security Framework initialized
[    0.006268] SELinux:  Disabled at boot.
[    0.007020] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.007341] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.008037] Initializing cgroup subsys memory
[    0.008256] Initializing cgroup subsys devices
[    0.008480] Initializing cgroup subsys freezer
[    0.008703] Initializing cgroup subsys net_cls
[    0.008925] Initializing cgroup subsys blkio
[    0.009005] Initializing cgroup subsys perf_event
[    0.009269] Disabled fast string operations
[    0.009483] CPU: Physical Processor ID: 0
[    0.009685] CPU: Processor Core ID: 0
[    0.010005] mce: CPU supports 6 MCE banks
[    0.010208] CPU0: Thermal monitoring enabled (TM2)
[    0.010458] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.010458] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[    0.010458] tlb_flushall_shift: 6
[    0.011101] Freeing SMP alternatives memory: 12K (c1656000 - c1659000)
[    0.011500] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.012344] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.022652] smpboot: CPU0: Intel(R) Core(TM) Duo CPU      L2400  @ 1.66GHz (fam: 06, model: 0e, stepping: 0c)
[    0.024000] Performance Events: Core events, core PMU driver.
[    0.024000] ... version:                1
[    0.024000] ... bit width:              40
[    0.024000] ... generic registers:      2
[    0.024000] ... value mask:             000000ffffffffff
[    0.024002] ... max period:             000000007fffffff
[    0.024266] ... fixed-purpose events:   0
[    0.024468] ... event mask:             0000000000000003
[    0.030085] CPU 1 irqstacks, hard=f50a4000 soft=f50a6000
[    0.030088] x86: Booting SMP configuration:
[    0.030296] .... node  #0, CPUs:      #1
[    0.002000] Initializing CPU#1
[    0.002000] Disabled fast string operations
[    0.042096] x86: Booted up 1 node, 2 CPUs
[    0.043005] smpboot: Total of 2 processors activated (6649.52 BogoMIPS)
[    0.045063] devtmpfs: initialized
[    0.046078] regulator-dummy: no parameters
[    0.046365] NET: Registered protocol family 16
[    0.046790] cpuidle: using governor ladder
[    0.046991] cpuidle: using governor menu
[    0.047085] ACPI: bus type PCI registered
[    0.047356] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.047809] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.048003] PCI: Using MMCONFIG for extended config space
[    0.048272] PCI: Using configuration type 1 for base access
[    0.051047] bio: create slab <bio-0> at 0
[    0.051251] ACPI: Added _OSI(Module Device)
[    0.051280] ACPI: Added _OSI(Processor Device)
[    0.051503] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.052003] ACPI: Added _OSI(Processor Aggregator Device)
[    0.056077] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.056833] ACPI: Interpreter enabled
[    0.057012] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    0.057480] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    0.057963] ACPI: (supports S0 S3 S4 S5)
[    0.058002] ACPI: Using IOAPIC for interrupt routing
[    0.058291] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.059232] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.068572] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.068887] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.069116] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.069644] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.070057] PCI host bridge to bus 0000:00
[    0.070267] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.070538] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.071005] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.071312] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.071651] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.072004] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.072344] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.072683] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.073004] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.073343] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.073682] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.074004] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.074344] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.074682] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.075004] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.075344] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.075682] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.076004] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[    0.076344] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.076693] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[    0.077115] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[    0.077131] pci 0000:00:02.0: reg 0x10: [mem 0xe4300000-0xe437ffff]
[    0.077140] pci 0000:00:02.0: reg 0x14: [io  0x50a0-0x50a7]
[    0.077149] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[    0.077158] pci 0000:00:02.0: reg 0x1c: [mem 0xe4400000-0xe443ffff]
[    0.077307] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.077320] pci 0000:00:02.1: reg 0x10: [mem 0xe4380000-0xe43fffff]
[    0.077523] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.077549] pci 0000:00:1b.0: reg 0x10: [mem 0xe4440000-0xe4443fff 64bit]
[    0.077668] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.077741] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.078084] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.078210] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.078358] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.078481] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.078624] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.078739] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.078886] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.079026] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.079186] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.079245] pci 0000:00:1d.0: reg 0x20: [io  0x5000-0x501f]
[    0.079352] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.079702] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.079761] pci 0000:00:1d.1: reg 0x20: [io  0x5020-0x503f]
[    0.079867] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.080076] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.080135] pci 0000:00:1d.2: reg 0x20: [io  0x5040-0x505f]
[    0.080242] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.080596] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.080655] pci 0000:00:1d.3: reg 0x20: [io  0x5060-0x507f]
[    0.080762] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.081084] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.081111] pci 0000:00:1d.7: reg 0x10: [mem 0xe4444000-0xe44443ff]
[    0.081222] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.081290] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.081650] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.082014] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.082127] pci 0000:00:1f.0: address space collision: [io  0x0500-0x057f] conflicts with ACPI CPU throttle [??? 0x00000510-0x00000515 flags 0x80000000]
[    0.082794] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.083006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[    0.083382] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[    0.083758] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[    0.084154] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.084174] pci 0000:00:1f.1: reg 0x10: [io  0x50a8-0x50af]
[    0.084188] pci 0000:00:1f.1: reg 0x14: [io  0x50c8-0x50cb]
[    0.084202] pci 0000:00:1f.1: reg 0x18: [io  0x50b0-0x50b7]
[    0.084216] pci 0000:00:1f.1: reg 0x1c: [io  0x50cc-0x50cf]
[    0.084230] pci 0000:00:1f.1: reg 0x20: [io  0x5080-0x508f]
[    0.084381] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[    0.084408] pci 0000:00:1f.2: reg 0x10: [io  0x50b8-0x50bf]
[    0.084421] pci 0000:00:1f.2: reg 0x14: [io  0x50d0-0x50d3]
[    0.084435] pci 0000:00:1f.2: reg 0x18: [io  0x50c0-0x50c7]
[    0.084449] pci 0000:00:1f.2: reg 0x1c: [io  0x50d4-0x50d7]
[    0.084463] pci 0000:00:1f.2: reg 0x20: [io  0x5090-0x509f]
[    0.084478] pci 0000:00:1f.2: reg 0x24: [mem 0xe4444400-0xe44447ff]
[    0.084538] pci 0000:00:1f.2: PME# supported from D3hot
[    0.084668] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.084742] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.085254] pci 0000:01:00.0: [8086:109a] type 00 class 0x020000
[    0.085289] pci 0000:01:00.0: reg 0x10: [mem 0xe4100000-0xe411ffff]
[    0.085333] pci 0000:01:00.0: reg 0x18: [io  0x4000-0x401f]
[    0.085535] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.085644] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.086020] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.086273] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.086280] pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.086439] pci 0000:02:00.0: [8086:4227] type 00 class 0x028000
[    0.086498] pci 0000:02:00.0: reg 0x10: [mem 0xe4200000-0xe4200fff]
[    0.087078] pci 0000:02:00.0: PME# supported from D0 D3hot
[    0.087217] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.087733] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.087984] pci 0000:00:1c.1:   bridge window [mem 0xe4200000-0xe42fffff]
[    0.088086] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.088424] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.088756] pci 0000:05:00.0: [1180:0476] type 02 class 0x060700
[    0.088779] pci 0000:05:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[    0.089004] pci 0000:05:00.0: MMC cards are now supported by standard SDHCI controller
[    0.089409] pci 0000:05:00.0: reg 0x10: [mem 0xe2000000-0xe2000fff]
[    0.089450] pci 0000:05:00.0: supports D1 D2
[    0.089454] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.089494] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.090041] pci 0000:05:00.1: [1180:0552] type 00 class 0x0c0010
[    0.090066] pci 0000:05:00.1: reg 0x10: [mem 0xe2001000-0xe20017ff]
[    0.090171] pci 0000:05:00.1: supports D1 D2
[    0.090175] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.090280] pci 0000:05:00.2: [1180:0822] type 00 class 0x080500
[    0.090307] pci 0000:05:00.2: reg 0x10: [mem 0xe2001800-0xe20018ff]
[    0.090409] pci 0000:05:00.2: supports D1 D2
[    0.090413] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.090570] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
[    0.090921] pci 0000:00:1e.0:   bridge window [io  0x2000-0x3fff]
[    0.090928] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe20fffff]
[    0.090939] pci 0000:00:1e.0:   bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.090943] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.090947] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.090952] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.090956] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[    0.090960] pci 0000:00:1e.0:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[    0.090964] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[    0.090969] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
[    0.090973] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.090977] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.090981] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.090986] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.090990] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.090994] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.090998] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[    0.091005] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[    0.091009] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[    0.091013] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[    0.091017] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.091087] pci_bus 0000:06: busn_res: can not insert [bus 06-ff] under [bus 05-06] (conflicts with (null) [bus 05-06])
[    0.091094] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
[    0.091100] pci_bus 0000:06: busn_res: can not insert [bus 06-09] under [bus 05-06] (conflicts with (null) [bus 05-06])
[    0.091107] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05-06]
[    0.091610] pci_bus 0000:00: on NUMA node 0
[    0.091733] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.092267] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.092793] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.093320] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.093850] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.094323] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.094848] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.095326] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.096301] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.097007] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.097403] vgaarb: loaded
[    0.097543] vgaarb: bridge control possible 0000:00:02.0
[    0.097942] SCSI subsystem initialized
[    0.098038] libata version 3.00 loaded.
[    0.098076] PCI: Using ACPI for IRQ routing
[    0.100942] PCI: pci_cache_line_size set to 64 bytes
[    0.101046] e820: reserve RAM buffer [mem 0x7f6d0000-0x7fffffff]
[    0.101302] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.101655] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.101935] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.104027] Switched to clocksource hpet
[    0.109990] pnp: PnP ACPI init
[    0.110184] ACPI: bus type PNP registered
[    0.110518] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.110831] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.111170] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.111498] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.111810] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.112146] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.112475] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.112792] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.113129] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.113635] pnp 00:01: [dma 4]
[    0.113690] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.113745] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.113901] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.114243] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.114316] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.114415] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.114705] system 00:05: [io  0x0500-0x057f] could not be reserved
[    0.115023] system 00:05: [io  0x0480-0x04bf] has been reserved
[    0.115319] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.115377] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.115454] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.115530] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.115578] pnp: PnP ACPI: found 9 devices
[    0.115775] ACPI: bus type PNP unregistered
[    0.154676] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.154729] pci 0000:00:1f.0: BAR 13: [io  0x0500-0x057f] has bogus alignment
[    0.155088] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.155104] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[    0.155491] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.155733] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.156044] pci 0000:00:1c.0:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.156384] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
[    0.156761] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.157021] pci 0000:00:1c.1:   bridge window [mem 0xe4200000-0xe42fffff]
[    0.157365] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.157625] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.157877] pci 0000:05:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.157881] pci 0000:05:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.157886] pci 0000:05:00.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.157891] pci 0000:05:00.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.157905] pci 0000:05:00.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[    0.158284] pci 0000:05:00.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[    0.158621] pci 0000:05:00.0: BAR 13: assigned [io  0x2000-0x20ff]
[    0.158917] pci 0000:05:00.0: BAR 14: assigned [io  0x2400-0x24ff]
[    0.159234] pci 0000:05:00.0: CardBus bridge to [bus 06-09]
[    0.159511] pci 0000:05:00.0:   bridge window [io  0x2000-0x20ff]
[    0.159805] pci 0000:05:00.0:   bridge window [io  0x2400-0x24ff]
[    0.160119] pci 0000:05:00.0:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.160480] pci 0000:05:00.0:   bridge window [mem 0x88000000-0x8bffffff]
[    0.160805] pci 0000:00:1e.0: PCI bridge to [bus 05-06]
[    0.161076] pci 0000:00:1e.0:   bridge window [io  0x2000-0x3fff]
[    0.161383] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe20fffff]
[    0.161715] pci 0000:00:1e.0:   bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.162107] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.162111] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.162115] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.162119] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.162123] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.162127] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.162131] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.162135] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.162139] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.162143] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.162148] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.162152] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.162156] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.162160] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.162164] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.162168] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.162172] pci_bus 0000:00: resource 20 [mem 0x80000000-0xfebfffff]
[    0.162176] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.162180] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.162184] pci_bus 0000:01: resource 1 [mem 0xe4100000-0xe41fffff]
[    0.162189] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[    0.162193] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe42fffff]
[    0.162197] pci_bus 0000:05: resource 0 [io  0x2000-0x3fff]
[    0.162201] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe20fffff]
[    0.162206] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.162210] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.162214] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.162218] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.162222] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.162226] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.162230] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.162234] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff]
[    0.162238] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.162242] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.162246] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.162250] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
[    0.162254] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.162258] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.162262] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.162266] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff]
[    0.162271] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff]
[    0.162275] pci_bus 0000:05: resource 20 [mem 0x80000000-0xfebfffff]
[    0.162279] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.162283] pci_bus 0000:06: resource 0 [io  0x2000-0x20ff]
[    0.162287] pci_bus 0000:06: resource 1 [io  0x2400-0x24ff]
[    0.162291] pci_bus 0000:06: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.162295] pci_bus 0000:06: resource 3 [mem 0x88000000-0x8bffffff]
[    0.162339] NET: Registered protocol family 2
[    0.162761] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.163153] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.163538] TCP: Hash tables configured (established 8192 bind 8192)
[    0.163870] TCP: reno registered
[    0.164047] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.164359] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.164758] NET: Registered protocol family 1
[    0.164989] pci 0000:00:02.0: Boot video device
[    0.166297] PCI: CLS 64 bytes, default 64
[    0.166366] Unpacking initramfs...
[    0.516067] Freeing initrd memory: 10316K (f6bca000 - f75dd000)
[    0.517059] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.517419] audit: initializing netlink subsys (disabled)
[    0.517715] audit: type=2000 audit(1401490145.516:1): initialized
[    0.518429] bounce pool size: 64 pages
[    0.518625] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.522504] VFS: Disk quotas dquot_6.5.2
[    0.522796] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.523941] msgmni has been set to 1725
[    0.524644] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.525021] io scheduler noop registered
[    0.525220] io scheduler deadline registered
[    0.525551] io scheduler cfq registered (default)
[    0.526124] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.526428] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.526697] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.526968] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.527168] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.527514] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.527840] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.527872] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.528232] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.528558] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.528590] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.528937] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.528968] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.529331] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.529394] intel_idle: does not run on family 6 model 14
[    0.529516] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0E:00/input/input0
[    0.530074] ACPI: Sleep Button [SLPB]
[    0.530344] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0D:00/input/input1
[    0.531023] ACPI: Lid Switch [LID]
[    0.531297] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.531665] ACPI: Power Button [PWRF]
[    0.532143] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    0.532662] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    0.533222] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.534386] Linux agpgart interface v0.103
[    0.534644] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    0.534968] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    0.536085] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.536573] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.536965] [drm] Initialized drm 1.1.0 20060810
[    0.537771] [drm:i915_dump_device_info], i915 device info: gen=3, pciid=0x27a2 flags=is_mobile,is_i945gm,has_fbc,has_hotplug,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,
[    0.537827] [drm:intel_detect_pch], No PCH found.
[    0.537832] [drm] Memory usable by graphics device = 256M
[    0.538119] [drm:i915_gem_gtt_init], GMADR size = 256M
[    0.538122] [drm:i915_gem_gtt_init], GTT stolen size = 8M
[    0.538392] [drm:intel_opregion_setup], graphic opregion physical addr: 0x0
[    0.538395] [drm:intel_opregion_setup], ACPI OpRegion not supported!
[    0.538422] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.538749] [drm] Driver supports precise vblank timestamp query.
[    0.539071] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz
[    0.539077] i915 0000:00:02.0: Invalid ROM contents
[    0.539322] [drm:intel_parse_bios], VBT signature missing
[    0.539324] [drm] failed to find VBIOS tables
[    0.539549] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[    0.539559] [drm:i915_gem_init_stolen], found 8388608 bytes of stolen memory at 7f800000
[    0.539593] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[    0.539908] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[    0.540061] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[    0.540061] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[    0.540061] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[    0.540061] i915: render error detected, EIR: 0x00000010
[    0.540061] i915: page table error
[    0.540061] i915:   PGTBL_ER: 0x00000012
[    0.540061] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[    0.540061] i915: render error detected, EIR: 0x00000010
[    0.540061] i915: page table error
[    0.540061] i915:   PGTBL_ER: 0x00000012
[    0.543426] [drm:intel_modeset_init], 2 display pipes available.
[    0.543431] [drm:intel_crtc_init], swapping pipes & planes for FBC
[    0.543435] [drm:intel_modeset_init], pipe A sprite A init failed: -19
[    0.543440] [drm:intel_crtc_init], swapping pipes & planes for FBC
[    0.543443] [drm:intel_modeset_init], pipe B sprite B init failed: -19
[    0.543449] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.566030] [drm:intel_lvds_init], using preferred mode from EDID: 
[    0.566036] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    0.566041] [drm:intel_lvds_init], detected single-link lvds configuration
[    0.566117] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 833232/4426545, sysfs interface registered
[    0.566237] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, ffff000]
[    0.568631] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[    0.568636] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
[    0.568766] [drm] initialized overlay support
[    0.568989] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
[    0.568998] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled
[    0.569013] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B
[    0.569018] [drm:intel_modeset_readout_hw_state], [ENCODER:17:DAC-17] hw state readout: disabled, pipe A
[    0.569023] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TV-19] hw state readout: disabled, pipe A
[    0.569027] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled
[    0.569031] [drm:intel_modeset_readout_hw_state], [CONNECTOR:16:VGA-1] hw state readout: disabled
[    0.569035] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:SVIDEO-1] hw state readout: disabled
[    0.569042] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[    0.569044] [drm:intel_dump_pipe_config], cpu_transcoder: A
[    0.569048] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[    0.569052] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.569056] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.569059] [drm:intel_dump_pipe_config], requested mode:
[    0.569063] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    0.569066] [drm:intel_dump_pipe_config], adjusted mode:
[    0.569071] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    0.569076] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[    0.569079] [drm:intel_dump_pipe_config], port clock: 0
[    0.569082] [drm:intel_dump_pipe_config], pipe src size: 0x0
[    0.569085] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    0.569089] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    0.569092] [drm:intel_dump_pipe_config], ips: 0
[    0.569095] [drm:intel_dump_pipe_config], double wide: 0
[    0.569099] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
[    0.569102] [drm:intel_dump_pipe_config], cpu_transcoder: B
[    0.569105] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[    0.569109] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.569113] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.569116] [drm:intel_dump_pipe_config], requested mode:
[    0.569121] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 1024 0 0 0 768 0 0 0 0x0 0x0
[    0.569124] [drm:intel_dump_pipe_config], adjusted mode:
[    0.569128] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[    0.569133] [drm:intel_dump_crtc_timings], crtc timings: 45982 1024 1048 1184 1344 768 779 1 806, type: 0x0 flags: 0xa
[    0.569137] [drm:intel_dump_pipe_config], port clock: 45982
[    0.569140] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[    0.569143] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    0.569147] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    0.569150] [drm:intel_dump_pipe_config], ips: 0
[    0.569153] [drm:intel_dump_pipe_config], double wide: 0
[    0.569157] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    0.569161] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    0.569165] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    0.569169] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    0.569172] [drm:check_crtc_state], [CRTC:3]
[    0.569176] [drm:check_crtc_state], [CRTC:4]
[    0.569193] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[    0.569197] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[    0.569211] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[    0.569218] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    0.569223] [drm:drm_mode_debug_printmodeline], Modeline 12:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    0.569229] [drm:drm_mode_debug_printmodeline], Modeline 9:"1024x768" 40 43330 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[    0.569235] [drm:drm_mode_debug_printmodeline], Modeline 10:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[    0.569240] [drm:drm_mode_debug_printmodeline], Modeline 11:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[    0.569244] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:VGA-1]
[    0.569248] [drm:intel_crt_detect], [CONNECTOR:16:VGA-1] force=1
[    0.581017] [drm:intel_crt_detect], CRT not detected via hotplug
[    0.582016] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[    0.582020] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    0.582024] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    0.582027] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[    0.582303] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[    0.582306] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[    0.582310] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[    0.582314] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:VGA-1] disconnected
[    0.582318] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:SVIDEO-1]
[    0.582321] [drm:intel_tv_detect], [CONNECTOR:18:SVIDEO-1] force=1
[    0.582326] [drm:intel_get_load_detect_pipe], [CONNECTOR:18:SVIDEO-1], [ENCODER:19:TV-19]
[    0.582329] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[    0.582340] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    0.582345] [drm:connected_sink_compute_bpp], [CONNECTOR:18:SVIDEO-1] checking for sink bpp constrains
[    0.582349] [drm:intel_tv_compute_config], forcing bpc to 8 for TV
[    0.582353] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[    0.582356] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[    0.582359] [drm:intel_dump_pipe_config], cpu_transcoder: A
[    0.582362] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[    0.582366] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.582370] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.582373] [drm:intel_dump_pipe_config], requested mode:
[    0.582379] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[    0.582382] [drm:intel_dump_pipe_config], adjusted mode:
[    0.582387] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[    0.582392] [drm:intel_dump_crtc_timings], crtc timings: 108000 1280 1368 1496 1712 1024 1027 1034 1104, type: 0x40 flags: 0x0
[    0.582395] [drm:intel_dump_pipe_config], port clock: 108000
[    0.582398] [drm:intel_dump_pipe_config], pipe src size: 1280x1024
[    0.582402] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    0.582406] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    0.582408] [drm:intel_dump_pipe_config], ips: 0
[    0.582411] [drm:intel_dump_pipe_config], double wide: 0
[    0.589862] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 5120
[    0.589868] [drm:intel_update_fbc], no output, disabling
[    0.589875] [drm:intel_crtc_mode_set], [ENCODER:19:TV-19] set [MODE:0:NTSC 480i]
[    0.595547] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    0.595551] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    0.595554] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[    0.595557] [drm:intel_calculate_wm], FIFO watermark level: -5
[    0.595561] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[    0.595564] [drm:i9xx_update_wm], self-refresh entries: 80
[    0.595567] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 47
[    0.595570] [drm:i9xx_update_wm], memory self refresh enabled
[    0.615017] [drm:intel_update_fbc], disabled per chip default
[    0.615025] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    0.615030] [drm:intel_connector_check_state], [CONNECTOR:18:SVIDEO-1]
[    0.615034] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    0.615038] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    0.615041] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    0.615045] [drm:check_crtc_state], [CRTC:3]
[    0.615056] [drm:check_crtc_state], [CRTC:4]
[    0.649017] [drm:intel_tv_detect_type], TV detected: c0007, 7f0000aa
[    0.649020] [drm:intel_tv_detect_type], Unrecognised TV connection
[    0.679018] [drm:intel_release_load_detect_pipe], [CONNECTOR:18:SVIDEO-1], [ENCODER:19:TV-19]
[    0.679023] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[    0.723019] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    0.723023] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    0.723026] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[    0.723029] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[    0.723033] [drm:i9xx_update_wm], memory self refresh disabled
[    0.723035] [drm:intel_update_fbc], no output, disabling
[    0.723042] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    0.723046] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    0.723050] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    0.723054] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    0.723057] [drm:check_crtc_state], [CRTC:3]
[    0.723060] [drm:check_crtc_state], [CRTC:4]
[    0.723238] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:SVIDEO-1] disconnected
[    0.723243] [drm:drm_setup_crtcs], 
[    0.723247] [drm:drm_enable_connectors], connector 5 enabled? yes
[    0.723250] [drm:drm_enable_connectors], connector 16 enabled? no
[    0.723253] [drm:drm_enable_connectors], connector 18 enabled? no
[    0.723257] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[    0.723260] [drm:drm_target_preferred], looking for preferred mode on connector 5
[    0.723263] [drm:drm_target_preferred], found mode 1024x768
[    0.723266] [drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
[    0.723270] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 4
[    0.723275] [drm:intelfb_create], no BIOS fb, allocating a new one
[    0.723279] [drm:i915_gem_object_create_stolen], creating stolen object: size=300000
[    0.723284] [drm:i915_pages_create_for_stolen], offset=0x20000, size=3145728
[    0.725629] [drm:intelfb_create], allocated 1024x768 fb: 0x00020000, bo f4991c00
[    0.725749] fbcon: inteldrmfb (fb0) is primary device
[    0.725803] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
[    0.725806] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[    0.725809] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    0.725812] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    0.725814] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[    0.725815] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[    0.725819] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    0.725823] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    0.725825] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=1, fb_changed=0
[    0.725827] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    0.725830] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[    0.725833] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
[    0.725836] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
[    0.725840] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[    0.725842] [drm:intel_dump_pipe_config], [CRTC:4][modeset] config for pipe B
[    0.725843] [drm:intel_dump_pipe_config], cpu_transcoder: B
[    0.725845] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[    0.725848] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.725850] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.725851] [drm:intel_dump_pipe_config], requested mode:
[    0.725855] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    0.725856] [drm:intel_dump_pipe_config], adjusted mode:
[    0.725860] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 50 54160 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[    0.725864] [drm:intel_dump_crtc_timings], crtc timings: 54160 1024 1048 1184 1344 768 771 777 806, type: 0x48 flags: 0xa
[    0.725865] [drm:intel_dump_pipe_config], port clock: 54160
[    0.725867] [drm:intel_dump_pipe_config], pipe src size: 1024x768
[    0.725869] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
[    0.725871] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    0.725872] [drm:intel_dump_pipe_config], ips: 0
[    0.725874] [drm:intel_dump_pipe_config], double wide: 0
[    0.725877] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[    0.766019] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    0.766022] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    0.766023] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[    0.766025] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[    0.766027] [drm:i9xx_update_wm], memory self refresh disabled
[    0.766031] [drm:i9xx_get_refclk], using SSC reference clock of 100000 kHz
[    0.766241] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 4096
[    0.766244] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1024x768]
[    0.766887] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[    0.766888] [drm:intel_calculate_wm], FIFO entries required for mode: 17
[    0.766890] [drm:intel_calculate_wm], FIFO watermark level: 9
[    0.766892] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[    0.766893] [drm:i9xx_update_wm], FIFO watermarks - A: 9, B: 29
[    0.766895] [drm:i9xx_update_wm], self-refresh entries: 64
[    0.766897] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 9, B: 29, C: 2, SR 63
[    0.766899] [drm:i9xx_update_wm], memory self refresh enabled
[    0.788017] [drm:intel_update_fbc], disabled per chip default
[    1.076017] [drm:intel_panel_enable_backlight], pipe B
[    1.076020] [drm:intel_panel_actually_set_backlight], set backlight PWM = 833232
[    1.076024] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[    1.076027] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[    1.076029] [drm:check_encoder_state], [ENCODER:17:DAC-17]
[    1.076031] [drm:check_encoder_state], [ENCODER:19:TV-19]
[    1.076033] [drm:check_crtc_state], [CRTC:3]
[    1.076035] [drm:check_crtc_state], [CRTC:4]
[    1.076065] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    1.076067] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    1.076070] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.081452] Console: switching to colour frame buffer device 128x48
[    1.081458] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    1.081461] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    1.081463] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.087211] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.087581] i915 0000:00:02.0: registered panic notifier
[    1.087908] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.088522] ahci 0000:00:1f.2: version 3.0
[    1.088735] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    1.088776] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.089211] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[    1.089705] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
[    1.090965] scsi0 : ahci
[    1.091320] scsi1 : ahci
[    1.091659] scsi2 : ahci
[    1.091999] scsi3 : ahci
[    1.092260] ata1: SATA max UDMA/133 abar m1024@0xe4444400 port 0xe4444500 irq 44
[    1.092700] ata2: DUMMY
[    1.092854] ata3: DUMMY
[    1.093019] ata4: DUMMY
[    1.093276] ata_piix 0000:00:1f.1: version 2.13
[    1.094043] scsi4 : ata_piix
[    1.094375] scsi5 : ata_piix
[    1.094634] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14
[    1.097117] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15
[    1.099617] ata5: port disabled--ignoring
[    1.099689] ata6: port disabled--ignoring
[    1.099693] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.114010] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.116433] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.118949] mousedev: PS/2 mouse device common for all mice
[    1.121402] rtc_cmos 00:06: RTC can wake from S4
[    1.123903] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.126292] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.128862] device-mapper: uevent: version 1.0.3
[    1.131228] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.133857] TCP: cubic registered
[    1.136278] NET: Registered protocol family 10
[    1.138854] mip6: Mobile IPv6
[    1.140981] NET: Registered protocol family 17
[    1.143247] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.145753] Key type dns_resolver registered
[    1.148272] Using IPI No-Shortcut mode
[    1.150634] registered taskstats version 1
[    1.153395] regulator-dummy: disabling
[    1.155679] rtc_cmos 00:06: setting system clock to 2014-05-30 22:49:06 UTC (1401490146)
[    1.519026] tsc: Refined TSC clocksource calibration: 1662.499 MHz
[    1.555030] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.557711] ata1.00: ATA-7: INTEL SSDSA2M040G2GC, 2CV102M3, max UDMA/133
[    1.560088] ata1.00: 78165360 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    1.562741] ata1.00: configured for UDMA/133
[    1.565167] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2M040 2CV1 PQ: 0 ANSI: 5
[    1.567851] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.570448] sd 0:0:0:0: [sda] Write Protect is off
[    1.572761] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.572797] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.576130]  sda: sda1 sda2
[    1.578806] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.581701] Freeing unused kernel memory: 480K (c15de000 - c1656000)
[    1.584111] Write protecting the kernel text: 4116k
[    1.586528] Write protecting the kernel read-only data: 1564k
[    1.610255] udevd[85]: starting version 175
[    1.619142] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    1.619147] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    1.619151] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.671989] ACPI: bus type USB registered
[    1.679918] usbcore: registered new interface driver usbfs
[    1.684239] usbcore: registered new interface driver hub
[    1.686874] usbcore: registered new device driver usb
[    1.690161] uhci_hcd: USB Universal Host Controller Interface driver
[    1.693215] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.695849] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.720861] pps_core: LinuxPPS API ver. 1 registered
[    1.727587] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000
[    1.734929] thermal LNXTHERM:00: registered as thermal_zone0
[    1.742469] sdhci: Secure Digital Host Controller Interface driver
[    1.748719] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[    1.752166] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
[    1.752172] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[    1.752176] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[    1.753327] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.753672] PTP clock support registered
[    1.757754] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.757755] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.758196] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.758256] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
[    1.759675] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.759678] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.759681] usb usb1: Product: UHCI Host Controller
[    1.759683] usb usb1: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    1.759685] usb usb1: SerialNumber: 0000:00:1d.0
[    1.760185] hub 1-0:1.0: USB hub found
[    1.760197] hub 1-0:1.0: 2 ports detected
[    1.760542] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.760551] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    1.760608] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005020
[    1.760648] ACPI: Thermal Zone [THM0] (45 C)
[    1.762731] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.762734] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.762786] usb usb2: Product: UHCI Host Controller
[    1.762789] usb usb2: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    1.762791] usb usb2: SerialNumber: 0000:00:1d.1
[    1.763576] thermal LNXTHERM:01: registered as thermal_zone1
[    1.763578] ACPI: Thermal Zone [THM1] (35 C)
[    1.763637] hub 2-0:1.0: USB hub found
[    1.763966] hub 2-0:1.0: 2 ports detected
[    1.764380] sdhci: Copyright(c) Pierre Ossman
[    1.765064] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.765073] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    1.765155] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[    1.765236] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.765239] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.765242] usb usb3: Product: UHCI Host Controller
[    1.765244] usb usb3: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    1.765246] usb usb3: SerialNumber: 0000:00:1d.2
[    1.767275] hub 3-0:1.0: USB hub found
[    1.767288] hub 3-0:1.0: 2 ports detected
[    1.767657] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.767664] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    1.767745] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
[    1.767836] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.767838] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.767841] usb usb4: Product: UHCI Host Controller
[    1.767843] usb usb4: Manufacturer: Linux 3.14.4-gnuowen uhci_hcd
[    1.767846] usb usb4: SerialNumber: 0000:00:1d.3
[    1.768839] hub 4-0:1.0: USB hub found
[    1.768850] hub 4-0:1.0: 2 ports detected
[    1.777507] xor: measuring software checksum speed
[    1.788848]    pIII_sse  :  4272.000 MB/sec
[    1.801154]    prefetch64-sse:  4644.000 MB/sec
[    1.805022] xor: using function: prefetch64-sse (4644.000 MB/sec)
[    1.819284] firewire_ohci 0000:05:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    1.822374] sdhci-pci 0000:05:00.2: SDHCI controller found [1180:0822] (rev 18)
[    1.825067] raid6: mmxx1     1613 MB/s
[    1.841510] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.844044] raid6: mmxx2     1625 MB/s
[    1.861150] raid6: sse1x1    1136 MB/s
[    1.880036] raid6: sse1x2    1523 MB/s
[    1.880865] mmc0: no vqmmc regulator found
[    1.880866] mmc0: no vmmc regulator found
[    1.881876] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.881998] mmc0: SDHCI controller on PCI [0000:05:00.2] using DMA
[    1.904443] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:3d:c3:60
[    1.907507] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.909181] raid6: sse2x1    1796 MB/s
[    1.925076] e1000e 0000:01:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005302-003
[    1.926042] raid6: sse2x2    2000 MB/s
[    1.926043] raid6: using algorithm sse2x2 (2000 MB/s)
[    1.926045] raid6: using intx1 recovery algorithm
[    1.931480] bio: create slab <bio-1> at 1
[    1.931900] Btrfs loaded
[    1.931939] BTRFS: selftest: Running btrfs free space cache tests
[    1.931941] BTRFS: selftest: Running extent only tests
[    1.931952] BTRFS: selftest: Running bitmap only tests
[    1.931962] BTRFS: selftest: Running bitmap and extent tests
[    1.931978] BTRFS: selftest: Free space cache tests finished
[    1.931980] BTRFS: selftest: Running extent buffer operation tests
[    1.931980] BTRFS: selftest: Running btrfs_split_item tests
[    1.931999] BTRFS: selftest: Running find delalloc tests
[    2.078880] BTRFS: selftest: Running btrfs_get_extent tests
[    2.081551] BTRFS: selftest: Running hole first btrfs_get_extent test
[    2.111049] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[    2.169137] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.262827] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2110
[    2.265635] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.268435] usb 4-1: Product: BCM2045B
[    2.271058] usb 4-1: Manufacturer: Broadcom Corp
[    2.288453] random: init urandom read with 81 bits of entropy available
[    2.326318] firewire_core 0000:05:00.1: created device fw0: GUID 0000000000000000, S400
[    2.381053] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[    2.464594] Adding 3906556k swap on /dev/sda2.  Priority:-1 extents:1 across:3906556k SS
[    2.511786] udevd[406]: starting version 175
[    2.526025] random: nonblocking pool is initialized
[    2.529031] Switched to clocksource tsc
[    2.550818] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
[    2.550825] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.550829] usb 4-2: Product: Biometric Coprocessor
[    2.550833] usb 4-2: Manufacturer: STMicroelectronics
[    2.602938] lp: driver loaded but no devices found
[    2.651854] ACPI: processor limited to max C-state 2
[    2.652956] Monitor-Mwait will be used to enter C-1 state
[    2.652972] tsc: Marking TSC unstable due to TSC halts in idle
[    2.653017] ACPI: acpi_idle registered with cpuidle
[    2.657033] Switched to clocksource hpet
[    2.668974] ACPI: AC Adapter [AC] (on-line)
[    2.669153] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20131218/ac-77)
[    2.714877] cfg80211: Calling CRDA to update world regulatory domain
[    2.750602] ACPI: Battery Slot [BAT0] (battery absent)
[    2.750738] ACPI: Battery Slot [BAT1] (battery absent)
[    2.754809] Non-volatile memory driver v1.3
[    2.770400] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    2.770406] thinkpad_acpi: http://ibm-acpi.sf.net/
[    2.770408] thinkpad_acpi: ThinkPad BIOS 7BETC7WW (2.08 ), EC 7BHT37WW-3.4
[    2.770411] thinkpad_acpi: Lenovo ThinkPad X60, model 1703WMF
[    2.770414] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
[    2.770417] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
[    2.775206] Bluetooth: Core ver 2.18
[    2.775263] NET: Registered protocol family 31
[    2.775267] Bluetooth: HCI device and connection manager initialized
[    2.775276] Bluetooth: HCI socket layer initialized
[    2.775281] Bluetooth: L2CAP socket layer initialized
[    2.775298] Bluetooth: SCO socket layer initialized
[    2.776164] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.776168] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    2.776812] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    2.779842] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[    2.779847] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[    2.780143] ehci-pci: EHCI PCI platform driver
[    2.785307] usbcore: registered new interface driver btusb
[    2.805333] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    2.816505] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    2.845321] usb 4-1: USB disconnect, device number 2
[    2.847182] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[    2.848915] usb 4-2: USB disconnect, device number 3
[    2.849371] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.849383] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    2.849405] ehci-pci 0000:00:1d.7: debug port 1
[    2.853334] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.853350] ehci-pci 0000:00:1d.7: irq 19, io mem 0xe4444000
[    2.857674] yenta_cardbus 0000:05:00.0: CardBus bridge found [0000:0000]
[    2.859651] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.859725] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    2.859729] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.859733] usb usb5: Product: EHCI Host Controller
[    2.859737] usb usb5: Manufacturer: Linux 3.14.4-gnuowen ehci_hcd
[    2.859741] usb usb5: SerialNumber: 0000:00:1d.7
[    2.860115] hub 5-0:1.0: USB hub found
[    2.860130] hub 5-0:1.0: 8 ports detected
[    2.882208] hub 1-0:1.0: USB hub found
[    2.882225] hub 1-0:1.0: 2 ports detected
[    2.903513] hub 2-0:1.0: USB hub found
[    2.903531] hub 2-0:1.0: 2 ports detected
[    2.925907] hub 3-0:1.0: USB hub found
[    2.925924] hub 3-0:1.0: 2 ports detected
[    2.929966] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[    2.929972] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
[    2.930059] iwl3945 0000:02:00.0: irq 46 for MSI/MSI-X
[    2.948717] hub 4-0:1.0: USB hub found
[    2.949406] hub 4-0:1.0: 2 ports detected
[    2.952809] ACPI Warning: SystemIO range 0x00000528-0x0000052f conflicts with OpRegion 0x00000500-0x0000057f (\PMIO) (20131218/utaddress-258)
[    2.952820] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.952826] ACPI Warning: SystemIO range 0x000004b0-0x000004bf conflicts with OpRegion 0x00000480-0x000004bb (\GPIO) (20131218/utaddress-258)
[    2.952834] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.952837] ACPI Warning: SystemIO range 0x00000480-0x000004af conflicts with OpRegion 0x00000480-0x000004bb (\GPIO) (20131218/utaddress-258)
[    2.952844] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.952847] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.986920] yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[    2.986928] yenta_cardbus 0000:05:00.0: Socket status: 30000006
[    2.986934] pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #06 to #09
[    2.986946] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [io  0x2000-0x3fff]
[    2.986951] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe20fffff]
[    2.986956] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe20fffff:
[    2.986971]  excluding 0xe1ef0000-0xe20fffff
[    2.986978] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe2100000-0xe40fffff 64bit pref]
[    2.986982] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe2100000-0xe40fffff:
[    2.988360] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[    2.993345]  excluding 0xe2100000-0xe40fffff
[    3.108400] ppdev: user-space parallel port driver
[    3.127471] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.127472] Bluetooth: BNEP filters: protocol multicast
[    3.127482] Bluetooth: BNEP socket layer initialized
[    3.142284] init: failsafe main process (639) killed by TERM signal
[    3.274700] Bluetooth: RFCOMM TTY layer initialized
[    3.274711] Bluetooth: RFCOMM socket layer initialized
[    3.274719] Bluetooth: RFCOMM ver 1.11
[    3.368177] cfg80211: World regulatory domain updated:
[    3.368184] cfg80211:  DFS Master region: unset
[    3.368187] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    3.368191] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    3.368195] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    3.368198] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    3.368202] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    3.368205] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    3.381157] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    3.395452] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[    3.395517] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[    3.478127] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[    3.478159]  excluding 0xf0000-0xfffff
[    3.478185] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[    3.478223]  clean.
[    3.478246] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[    3.478284]  excluding 0x60000000-0x60ffffff
[    3.569396] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
