# changelog

author: Heinz Mauelshagen <heinzm@redhat.com> 1.0.0.rc8-FC4_1
changelog:
  - nv.c: fixed stripe size
  - sil.c: avoid incarnation_no in name creation, because the Windows
           driver changes it every time
  - added --ignorelocking option to avoid taking out locks in early boot
    where no read/write access to /var is given


author: Heinz Mauelshagen <heinzm@redhat.com> 1.0.0.rc6.1-4_FC4
changelog:
  - VIA metadata format handler
  - added RAID10 to lsi metadata format handler
  - "dmraid -rD": file device size into {devicename}_{formatname}.size
  - "dmraid -tay": pretty print multi-line tables ala "dmsetup table"
  - "dmraid -l": display supported RAID levels + manual update
  - _sil_read() used LOG_NOTICE rather than LOG_INFO in order to
    avoid messages about valid metadata areas being displayed
    during "dmraid -vay".
  - isw, sil filed metadata offset on "-r -D" in sectors rather than in bytes.
  - isw needed dev_sort() to sort RAID devices in sets correctly.
  - pdc metadata format handler name creation. Lead to
    wrong RAID set grouping logic in some configurations.
  - pdc RAID1 size calculation fixed (rc6.1)
  - dos.c: partition table code fixes by Paul Moore
  - _free_dev_pointers(): fixed potential OOB error
  - hpt37x_check: deal with raid_disks = 1 in mirror sets
  - pdc_check: status & 0x80 doesn't always show a failed device;
    removed that check for now. Status definitions needed.
  - sil addition of RAID sets to global list of sets
  - sil spare device memory leak
  - group_set(): removal of RAID set in case of error
  - hpt37x: handle total_secs > device size
  - allow -p with -f
  - enhanced error message by checking target type against list of
    registered target types


author: Paul W. Frields <stickster@gmail.com> - 7.0.0-1
changelog:
  - Fix fedora-release-notes to use yelp ghelp facility
  - Fix post script to properly update scrollkeeper
  - Build for F7


author: Paul W. Frields <stickster@gmail.com> - 6.93-3
changelog:
  - Relocate about-fedora and use yelp's ghelp: facility (#208220)
  - Fix distro name in OMF and document metadata


author: Jesse Keating <jkeating@redhat.com> - 5.91-3
changelog:
  - Only use tabs
  - Version the indexhtml provides/obsoletes
  - Cleanup post and postun scriptlets
  - Don't require fedora-release, fedora-release requires us.
  - Add a URL tag


author: Rex Dieter <rdieter[AT]fedoraproject.org> 1.4.0a-5
changelog:
  - -libs: new subpkg to be multilib friendly
  - -utils: package exrdisplay separately (separate fltk dep)


author: Ignacio Vazquez-Abrams <ivazquez@ivazquez.net> 1.2.2-4
changelog:
  - Removed -devel dep on zlib-devel (#165729)
  - Added --disable-static to %configure
  - Fixed build with GCC 4.0.1
  - Added .so links to -devel


author: Ignacio Vazquez-Abrams <ivazquez@ivazquez.net> 1.2.2-2
changelog:
  - Fix BuildRequires
  - Fix Requires on -devel
  - Add %post[un] scriptlets
  - Fix ownership in -devel
  - Don't have .deps files in %doc


author: Deji Akingunola <dakingun@gmail.com> - 0.3.3-13
changelog:
  - Fix crash after refresh bug (Bug #309251, patch by Jim Hayward)
  - Fix to use realpath properly (Bug #313281, patch by Jim Hayward)


author: Deji Akingunola <dakingun@gmail.com> - 0.3.3-11
changelog:
  - Apply patch to only detect real devices, useful for correcting gparted slow 
   startup in situations when floppy drives don't exist but are enabled in bios
   (BZ #208821).


author: Deji Akingunola <dakingun@gmail.com> - 0.3.3-8
changelog:
  - Explicitly require hal >= 0.5.9
  - Remove the hal policy file created by gparted (if it's still there) on upgrade


author: Deji Akingunola <dakingun@gmail.com> - 0.3.3-7
changelog:
  - Patch gparted to not create a hal fdi file but use hal-lock instead, this will hopefully fix BZ #215657
  - Clean up the spec file


author: Tom "spot" Callaway <tcallawa@redhat.com> 2.6.0-2
changelog:
  - add R CMD javareconf to post (bz 354541)
  - don't pickup bogus perl provides (bz 356071)
  - use xdg-open, drop requires for firefox/evince (bz 351841)


author: Tom "spot" Callaway <tcallawa@redhat.com> 2.4.1-4
changelog:
  - get rid of termcap related requires, replace with ncurses
  - use java-1.5.0-gcj instead of old java-1.4.2
  - add /usr/share/R/library as a valid R_LIBS directory for noarch bits


author: Tom "spot" Callaway <tcallawa@redhat.com> 2.0.1-50
changelog:
  - big bump. This is the fc4 package, the fc3 package is 2.0.1-11
  - enable gnome gui, add requires as needed


author: Martyn Plummer <plummer@iarc.fr> 0:2.0.1-0.fdr.3
changelog:
  - R-devel package is now a stub package with no files, except a documentation
    file (RPM won't accept sub-packages with no files). R now conflicts
    with earlier (i.e 0:2.0.1-0.fdr.2) versions of R-devel.
  - Created libRmath subpackage with shared library.


author: Martyn Plummer <plummer@iarc.fr> 0:2.0.0-0.fdr.3
changelog:
  - Set R_PRINTCMD at configure times so that by default getOption(printcmd)
    gives "lpr".
  - Define macro fcx for all Fedora distributions. This replaces Rinfo


author: Martyn Plummer <plummer@iarc.fr> 0:2.0.0-0.fdr.1
changelog:
  - Built R 2.0.0
  - There is no longer a BUGS file, so this is not installed as a 
    documentation file.


author: Martyn Plummer <plummer@iarc.fr> 0:1.9.1-0.fdr.4
changelog:
  - Added gcc-g++ to the list of BuildRequires for all platforms.
    Although a C++ compiler is not necessary to build R, it must
    be present at configure time or R will not be correctly configured
    to build packages containing C++ code.


author: Martyn Plummer <plummner@iarc.fr> 0:1.9.1-0.fdr.2
changelog:
  - Added libtermcap-devel as BuildRequires for RH 8.0 and 9. Without
    this we get no readline support.


author: Martyn Plummer <plummer@iarc.fr> 0:1.9.0-0.fdr.3
changelog:
  - Corrected names for fc1/fc2/el3 when using conditional BuildRequires
  - Configure searches for C++ preprocessor and fails if we don't have
    gcc-c++ installed. Added to BuildRequires for FC2.


author: Martyn Plummer <plummer@iarc.fr> 0:1.9.0-0.fdr.2
changelog:
  - Added patch to overcome problems with X.org headers (backported
    from R 1.9.1; patch supplied by Graeme Ambler)
  - Changed permissions of source files to 644 to please rpmlint


author: Martyn Plummer <plummer@iarc.fr> 0:1.9.0-0.fdr.1
changelog:
  - R.spec file now has mode 644. Previously it was unreadable by other
    users and this was causing a crash building under mach.
  - Changed version number to conform to Fedora conventions. 
  - Removed Provides: and Obsoletes: R-base, R-recommended, which are
    now several years old. Nobody should have a copy of R-base on a 
    supported platform.
  - Changed buildroot to Fedora standard
  - Added Requires(post,preun): info
  - Redirect output from postinstall/uninstall scripts to /dev/null
  - Added BuildRequires tags necessary to install R with full 
    capabilities on a clean mach buildroot. Conditional buildrequires
    for tcl-devel and tk-devel which were not present on RH9 or earlier.


author: Martyn Plummer <plummer@iarc.fr>
changelog:
  - Added patch to set environment variable LANG to C in shell wrapper,
    avoiding warnings about UTF-8 locale not being supported


author: Martyn Plummer <plummer@iarc.fr>
changelog:
  - No need to export optimization flags. This is done by 
    CFLAGS="${CFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32}" ; export FFLAGS ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
             [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /bin/rm -f $i && /bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=ppc-redhat-linux-gnu --host=ppc-redhat-linux-gnu \
  	--target=ppc-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/usr/com \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info
  - Folded info installation into 
    /usr/bin/make \
  	prefix=/var/tmp/R-2.6.0-3.fc8.1-root-kojibuilder/usr \
  	exec_prefix=/var/tmp/R-2.6.0-3.fc8.1-root-kojibuilder/usr \
  	bindir=/var/tmp/R-2.6.0-3.fc8.1-root-kojibuilder/usr/bin \
  	sbindir=/var/tmp/R-2.6.0-3.fc8.1-root-kojibuilder/usr/sbin \
  	sysconfdir=/var/tmp/R-2.6.0-3.fc8.1-root-kojibuilder/etc \
  	datadir=/var/tmp/R-2.6.0-3.fc8.1-root-kojibuilder/usr/share \
  	includedir=/var/tmp/R-2.6.0-3.fc8.1-root-kojibuilder/usr/include \
  	libdir=/var/tmp/R-2.6.0-3.fc8.1-root-kojibuilder/usr/lib \
  	libexecdir=/var/tmp/R-2.6.0-3.fc8.1-root-kojibuilder/usr/libexec \
  	localstatedir=/var/tmp/R-2.6.0-3.fc8.1-root-kojibuilder/var \
  	sharedstatedir=/var/tmp/R-2.6.0-3.fc8.1-root-kojibuilder/usr/com \
  	mandir=/var/tmp/R-2.6.0-3.fc8.1-root-kojibuilder/usr/share/man \
  	infodir=/var/tmp/R-2.6.0-3.fc8.1-root-kojibuilder/usr/share/info \
    install 
  - Check that RPM_BASE_ROOT is not set to "/" before cleaning up


author: Martyn Plummer <plummer@iarc.fr>
changelog:
  - Changes from James Henstridge <james@daa.com.au> to allow building on IA64:
  - Added BuildRequires for tcl-devel tk-devel tetex-latex
  - Use the 
    CFLAGS="${CFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32}" ; export FFLAGS ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
             [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /bin/rm -f $i && /bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=ppc-redhat-linux-gnu --host=ppc-redhat-linux-gnu \
  	--target=ppc-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/usr/com \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info macro to call the configure script
  - Pass --with-tcl-config and --with-tk-config arguments to configure
  - Set rhome to point to the build root during "make install"


author: Martin Sourada <martin.sourada@seznam.cz> - 0.6-3
changelog:
  - Require at least the version of gtk it was build against
   - rhbz #301851 (patch from Ignacio Vazquez-Abrams)


author: Martin Sourada <martin.sourada@seznam.cz> - 0.5-2
changelog:
  - add Requires: gtk2 for engines directory ownership
  - remove --enable-animation
  - remove Obsoletes/Provides, not needed now


author: Daniel Geiger <dgeiger_343@yahoo.com> - 0.5-1
changelog:
  - Numerous Nodoka specific themeing adjustments (so a large version number jump), including:
   - Adjustment of arrow styling
   - Frames and notebooks now use roundness
   - Adjustment of scrollbar handle styling
   - Scale sliders now use same handle styling as scrollbars
   - Adjustment of resize handle styling
   - Menubaritems are now tab-like, use roundness; menuitems are squared
   - Changing of gtkrc engine configuration options to more fit the Nodoka style (see README), plus general code tweaks


author: Martin Sourada <martin.sourada@seznam.cz> - 0.3.2-1
changelog:
  - new upstream version
  - new, reworked function for setting cairo gradients
  - add shadows to buttons and editboxes
  - rework radiobutton and checkbutton


author: Warren Togami <wtogami@redhat.com> - 1.2.8-4
changelog:
  - SDL_AUDIODRIVER=esd temporary hack until SDL supports pulseaudio directly
    avoids applications from locking up


author: Brian Pepple <bpepple@fedoraproject.org> - 1.2.8-1
changelog:
  - Update to 1.2.8.
  - Drop requires on SDL, since the devel soname will pull it in.
  - Drop volume patch.  fixed upstream.
  - Drop reopen patch.  fixed upstream.
  - Drop bad-code patch.  fixed upstream.
  - Bump min version of SDL needed.
  - Bump min version of mikmod needed.


author: Brian Pepple <bpepple@fedoraproject.org> - 1.2.7-1
changelog:
  - Update to 1.2.7.
  - Update bad-code & timidity patches.
  - Simplify description & summary for devel package.
  - Use disable-static configure flag.
  - Drop 64bit patch, fixed upstream.
  - Drop libmikmod.patch, fixed upstream.
  - Add patch to allow control volume w/playmus. Bug #203210.


author: Ville Skyttä <ville.skytta at iki.fi> - 1.2.6-1
changelog:
  - 1.2.6, use system libmikmod.
  - Drop obsolete patches, *.la and over-eager cleanup from %clean.
  - Build with dependency tracking disabled.


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 1.2.5-10.1
changelog:
  - Make -devel package require exact release of main package (this
    is particularly important for API changes such as in 1.2.5-9).


author: Ville Skyttä <ville.skytta at iki.fi> - 1.2.5-9
changelog:
  - Bring back Ogg support (BuildRequire libvorbis-devel).
  - Add SDL-devel dependency to -devel.
  - Improve description.


author: Thomas Woerner <twoerner@redhat.com> 1.2.5-1
changelog:
  - new version 1.2.5
  - cleaned up spec file
  - installing playmus and playwave by hand (not installed automatically anymore)


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.2.1-1
changelog:
  - Require arts-devel rather than the obsolete kdelibs-sound-devel
  - Update to 1.2.1
  - Fix build with current auto* tools


author: Bill Nottingham <notting@redhat.com> - 6:3.5.8-5
changelog:
  - use correct path for gdm socket, so you get proper options on logout
    (http://bugs.kde.org/show_bug.cgi?id=149045)


author: Rex Dieter <rdieter[AT]fedoraproject.org> - 6:3.5.8-2
changelog:
  - update consolekit patch
  - omit konsole-bz#244906 (doesn't build)
  - --enable-final
  - libs subpkg (more multilib friendly)


author: Rex Dieter <rdieter[AT]fedoraproject.org> - 6:3.5.6-8
changelog:
  - cleanup/simplify scriptlets
  - drop Req/Prov's that include %_arch (they don't work)
  - Req: +samba-common
  - BR: +OpenEXR-devel, -cdparanoia
  - env.sh: use XDG_MENU_PREFIX
  - npapi-64bit-fixes.patch


author: Than Ngo <than@redhat.com> - 6:3.5.6-7.fc7
changelog:
  - enable userlist by default in KDM, bz#239701
  - own %{_datadir}/apps/kdm/faces, bz#239694
  - remove unneeded Rq on kdelibs-devel (#238846)


author: Than Ngo <than@redhat.com> - 6:3.5.6-6.fc7
changelog:
  - apply patch KDM to support ConsoleKit, thanks to Kevin Kofler and
    S.Çağlar Onur, #228111
  - ktip, kpersonlizer, kpager, kappfinder in kdebase-extras


author: Than Ngo <than@redhat.com> 6:3.5.4-10
changelog:
  - FedoraDNA for KDM
  - fix #205566, don't overwrite config files
  - fix #178320,#198828, follow menu-spec


author: Than Ngo <than@redhat.com> 6:3.5.4-8
changelog:
  - apply upstream patch
     fix #205701, no bold is displayed in konsole
     fix two possible mem leaks
  - add missing icons for package_games_kids
  - add more icon contexts (Tango icontheme)


author: Than Ngo <than@redhat.com> 6:3.5.4-7
changelog:
  - apply upstream patch
     fix #53642, Menubar is always visible after coming back from fullscreen
     fix #133665, crash in kiosk mode


author: Than Ngo <than@redhat.com> 6:3.5.4-5
changelog:
  - add Requires: eject 
  - fix #203279, antialiasing issue
  - apply upstream patch to fix kdedesktop crash, kde#132873
  - fix #201507, pam config issue
  - fix kdm crash


author: Than Ngo <than@redhat.com> 6:3.5.4-1
changelog:
  - apply upstream patch to fix KDED crashing on startup when D-BUS is unavailable.
  - apply upstream patch to fix kde#128552, kicker regression


author: Petr Rockai <prockai@redhat.com> - 6:3.5.4-0.pre1
changelog:
  - prerelease of 3.5.4 (from the first-cut tag)
  - disable --enable-final on s390x in case it would cause problems


author: Than Ngo <than@redhat.com> 6:3.5.3-6
changelog:
  - apply patch to to fix #194659, CVE-2006-2449 KDM symlink attack vulnerability
    thanks to KDE security team


author: Than Ngo <than@redhat.com> 6:3.5.3-3
changelog:
  - move only *.so symlinks to -devel subpackage
  - enable --enable-new-ldflags again since ld bug fixed


author: Than Ngo <than@redhat.com> 6:3.5.3-1
changelog:
  - update to 3.5.3
  - drop --enable-new-ldflags, workaround for ld bug
  - update kioslave_media_dbus patch


author: Than Ngo <than@redhat.com> 6:3.5.2-11
changelog:
  - apply upstream patches to fix several bugs in konsole, and
    fix #192832, konsole crashes on kde logout


author: Than Ngo <than@redhat.com> 6:3.5.2-10
changelog:
  - fix #191049, KDE screensaver calls PAM incorrectly
  - fix 191306, Kde Help Center can't build an index


author: Than Ngo <than@redhat.com> 6:3.5.2-8
changelog:
  - fix 190836, xmTextFieldClass widgets don't work properly
  - fix 153202, startkde gets wrong field from space_tmp/space_home with finnish


author: Than Ngo <than@redhat.com> 6:3.5.2-1
changelog:
  - update to 3.5.2
  - update dbus patch
  - drop kdebase-3.5.1-kwin-systray.patch, kdebase-3.5.1-keyboardlayout.patch,
    included in new upstream


author: Than Ngo <than@redhat.com> 6:3.5.1-3
changelog:
  - kscreensaver/kdm/kcheckpass use a separate PAM config file #66902
  - cleanup kdm config file #166388 
  - apply patch to launch kde scripts in shutdown,env directories #178326
  - kdm.log logrotate-enabled #178328
  - add konqueror webshortcuts for fedora project #178366
  - don't include unnecessary README #169331


author: Than Ngo <than@redhat.com> 6:3.5.1-1
changelog:
  - 3.5.1
  - apply patch to fix kded segfaults for audio/blank cd's
  - get rid some of unneeded patches
  - add buildrequires on libxkbfile-devel


author: Than Ngo <than@redhat.com> 6:3.5.0-2
changelog:
  - add dbus support
  - backport kde-mount from coolo kde-branch for working with new dbus/hal
  - update KDE default setting
  - update desktop-database/GTK+ icon cache


author: Than Ngo <than@redhat.com> 6:3.4.2-4
changelog:
  - apply patch to fix local root vulnerability in kcheckpass CAN-2005-2494, #166997
  - apply upstream patch to fix kinfocenter opengl DRI/GLX crash


author: Than Ngo <than@redhat.com> 6:3.4.0-6
changelog:
  - apply kdebase-3.4.0rc1-konsole-keymap.patch to change backspace key
    to ASCII-DEL, thanks to j.w.r.degoede@hhs.nl


author: Than Ngo <than@redhat.com> 6:3.4.0-4
changelog:
  - update kdebase-3.4.0rc1-konsole-keymap.patch
  - add Bluecurve theme for kdm
  - enable show device icons as default


author: Than Ngo <than@redhat.com> 6:3.3.2-0.2
changelog:
  - apply the patch to fix Konqueror Window Injection Vulnerability #142510
    CAN-2004-1158,  Thanks to KDE security team


author: Than Ngo <than@redhat.com> 6:3.3.2-0.1
changelog:
  - update to 3.3.2
  - remove unneeded kdebase-3.3.1-cvs.patch, kdebase-3.3.1-sidebar.patch
  - add CVS patch, that fixes a konsole crash


author: Than Ngo <than@redhat.com> 6:3.3.1-6
changelog:
  - remove unneeded require on lm_sensors #137649
  - enable devices-symbol
  - get rid of unneeded device desktop files


author: Than Ngo <than@redhat.com> 6:3.3.0-2
changelog:
  - Own mozilla plugin dir, bug #131667
  - Fix hangup in kicker when user clears clipboard history fom klipper
  - Fix df problem on AFS again


author: Than Ngo <than@redhat.com> 3.2.1-1.5
changelog:
  - fix typo bug
  - add missing Catagories in konsole, #118864
  - add missing requires on kdelibs-devel, bug #118605


author: Than Ngo <than@redhat.com> 3.2.0-1.9
changelog:
  - don't rename to the contents of the translated Name field
  - create desktop files if Desktop directory is empty


author: Than Ngo <than@redhat.com> 6:3.1.94-0.2
changelog:
  - KDE 3.2 Beta 2 respin
  - adjusted aboutkde.patch for 3.2
  - remove kdebase-3.1.93-menu.patch, it's in upstream


author: Than Ngo <than@redhat.com> 6:3.1.93-0.3
changelog:
  - disable kpersonalizer
  - fix konsole desktop file
  - get rid of some old workarounds in startkde, speedup startkde
  - get rid of theme, it's obsolete in 3.2
  - add missing starthere icon
  - add missing kde-unknown.directory


author: Than Ngo <than@redhat.com> 6:3.1.93-0.1
changelog:
  - KDE 3.2 Beta 1
  - remove many patch files, which are now in upstream
  - cleanup many patch files
  - cleanup startkde
  - cleanup rpm file list


author: Than Ngo <than@redhat.com> 6:3.1.4-4
changelog:
  - add patch to allow different icon size in kicker menu
  - don't reset icon size to 20x20 if it's greater than 20


author: Than Ngo <than@redhat.com> 6:3.1.4-2
changelog:
  - install kde.desktop in /usr/share/xsession
  - add more translations for kde.desktop (stolen from kde 3.2 cvs)


author: Than Ngo <than@redhat.com> 6:3.1.2-6
changelog:
  - fix to build nsplugins with openmotif
  - add buildrequires openmotif-devel instead lesstif-devel
  - vfolder-0.1.2


author: Elliot Lee <sopwith@redhat.com> 6:3.1.1-7
changelog:
  - Unconditionally extract vfolder archive, to allow for patching
  - Patch vfolder/admin/cvs.sh to deal with new 'head' options.
  - Patch vfolder/xmlcheck/main.cpp to fix typo


author: Than Ngo <than@redhat.com> 6:3.1.1-1
changelog:
  - 3.1.1 release
  - get rid of some patch files, which are now in new upstream
  - adjust some patch files for 3.1.1
  - permission fix
  - get rid of unneeded pam config file of kscreensaver
  - move desktop-create-menu to kdelibs


author: Than Ngo <than@redhat.com> 6:3.1-9
changelog:
  - set default start page to red hat welcome page (#84858)
  - add fix for KDE Random Screensaver (#83671)


author: Than Ngo <than@redhat.com> 6:3.1-5
changelog:
  - fix scanpath mozilla plugin, #83618
  - add a patch file from Leon Ho llch@redhat.com,  #82529
  - add some missing KDE screensavers, bug #83671


author: Than Ngo <than@redhat.com> 6:3.1-4
changelog:
  - rhn-applet/pam-panel-icon/eggcups applet start correct now, #83264
  - set NFSPollInterval=5000, PollInterval=500


author: Nalin Dahyabhai <nalin@redhat.com> 3.1-0.12
changelog:
  - add openssl-devel as a buildreq
  - add pkgconfig as a buildreq
  - if pkgconfig admits to knowing about openssl, incorporate its information


author: Than Ngo <than@redhat.com> 3.1-0.6
changelog:
  - clean up KDE menu/kcontrol center menu
  - fix build problem on s390/s390x
  - eggcups to kdebase default session (Tim Waugh)
  - rpm macros (Mike Harris)


author: Nalin Dahyabhai <nalin@redhat.com> 3.0.5-3
changelog:
  - remove directory names from PAM configuration files so that they can be
    used for all arches on multilib boxes


author: Than Ngo <than@redhat.com> 3.0.4-2.2
changelog:
  - konsole super user mode shouldn't require password to be retyped (bug #77387)
  - unpackged files in buildroot


author: Than Ngo <than@redhat.com> 3.0.4-1
changelog:
  - cleanup some patch file for 3.0.4
  - cleanup configure to build correct on x86_64
  - Added /etc/X11/applnk in WatchDir
  - KDE screensaver issue (bug #73412)
  - better handling of desktop file renames (bug #74071)
  - Konsole screen refresh is slow (bug #73303, #75154)
  - localiztion fix (bug #75085, #75012)
  - Unable to acess the preferences of KNewsTicker (bug #74805)


author: Than Ngo <than@redhat.com> 3.0.3-10
changelog:
  - Fixed kdm to read X resource if it's deleted.
  - Set Bluecurve theme in kdm as default
  - Add share/applnk in WatchDir
  - remove merging share/applnk
  - Ajust Colors scheme


author: Than Ngo <than@redhat.com> 3.0.3-9
changelog:
  - turn on  AntiAliasing in KDM as default (bug #68872)
  - fixed KDM using Fonts Sans
  - put Red Hat in the version number
  - disable Report Bug menu item
  - turn off stick button in window title
  - added katefiledialogencoding patch from Leon Ho (bug #68214)


author: Than Ngo <than@redhat.com> 3.0.3-8
changelog:
  - Fixed kicker not showing buttons if desktop file not found (bug #71141)
  - Fixed clock patch to prefer redhat-config-date
  - klippper only showed in KDE
  - Add icon order patch from Phil Knirsch


author: Than Ngo <than@redhat.com> 3.0.3-7
changelog:
  - Added Bluecurve theme for kthememanager
  - Fixed a bug in KDE default theme (bug #71413)
  - Added missing KDE settings
  - Added keymap patch and clock patch from Preston
  - Adjusted clock patch


author: Than Ngo <than@redhat.com> 3.0.3-5
changelog:
  - Add fix to resize panel icons (bug #72549)
  - Add fix to lauch kdm login manager module from kcontrol (bug #72470)
  - remove OnlyShowIn KDE in konqueror (bug #72408)
  - Get rid of kpersonalizer from startkde, now KDE supports LANG (bug #72251)
  - Fix vfolder bug (bug #71919)
  - Set Sans 10 as default font
  - Set help_about_kde to false as default
  - Rename konsole to Terminal
  - Add fix to reload global X resource if it's deleted


author: Preston Brown <pbrown@redhat.com> 3.0.3-4
changelog:
  - Default mouse focus should be click to focus (#71816)
  - move all "Preferences->System" items to Extras
  - move kdm configuration to Extras
  - remove "Date & Time" (duplicate functionality) from menus (#59695)
  - remove kcmfontinst (incompatible functionality) from menus (#59695)
  - Kate into Accessories category (from Programming)
  - fix Configure... menu entry in RMB menu of kwin
  - default wallpaper mode is Scaled not Centered


author: Than Ngo <than@redhat.com> 3.0.3-3
changelog:
  - Some Tweaks in configuration
  - lauch rhn-applet-gui instead applet-gui
  - Fixed kpersonalizer using Bluecurve instead Wonderland


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.3-2
changelog:
  - Some fixes in the vfolder ioslave
  - Support <Not> queries in the vfolder ioslave
  - Add Start Here icon on desktop


author: Than Ngo <than@redhat.com> 3.0.3-1
changelog:
  - 3.0.3
  - Added some rh default settings in kicker/kwin
  - Fixed a bug in kicker to start menueditor (bug #71164)
  - Fixed a bug in setting clock/date
  - Added fix to start rhn-applet and pam-panel-icon in systemtray
  - Configuration tweaks (bug #70926)
  - Added fix to use Bluecurve
  - Added new desktop-create-kmenu
  - Added a systemtray patch from Harald Hoyer


author: Than Ngo <than@redhat.com> 3.0.2-8
changelog:
  - Implemented slotRhDescription in kpersonalizer (bug #70863)
  - Added more BuildPrereq (bug #69992, #70011)
  - Wonderland icon Theme as default (bug #69654)
  - Added fix for looking desktop file with prefix kde
  - Fixed a bug Konsole configure (bug #67217)
  - don't use prefix kde by some typical KDE appllications
  - use -O0 on alpha machine (compiler bug)


author: Than Ngo <than@redhat.com> 3.0.2-7.2
changelog:
  - add patch file to fix kicker segfault (bug #69688)
  - get rid of Taiwanese Flag in KDE (bug #70235)


author: Than Ngo <than@redhat.com> 3.0.2-7.1
changelog:
  - don't merge old kde menus (#69652)
  - add fix to show evolution/mozilla in kicker (#69725, #70152, #70618, #69822)
  - add fix to have rh panel layout (#59676)
  - add some fixes from 3.0.2 stable branch
  - add a patch file to fix a bug in startkde, Karsten Hopp
  - add requires images for ksplash
  - add pam_timestamp support (#69863)
  - add fix to make kpersonalizer usable in 640x480 resolution (#68358)
  - add fix for looking DesktopEntryName with prefix kde


author: Than Ngo <than@redhat.com> 3.0.2-5
changelog:
  - Fixed a bug by writing widgetStyle in confile
  - default.jpg as default background, if no background image is found
    use plain color #5477A0
  - BusyCursor=false as default for rh Style
  - use klipper applet rather than tray icon (bug #67107)
  - add rh panel layout
  - build against gcc 3.2-0.1


author: Than Ngo <than@redhat.com> 3.0.2-4
changelog:
  - merge /var/lib/menu/kde/Applications
  - Added missing index file for Crystal icons
  - Own /usr/share/icons/Crystal, /usr/share/mimelnk/print
  - Fixed kwin issue in kpersonalizer
  - Added a missing patch file
  - Fixed KDE menu issue (bug #69102, #67648)
  - Fixed Control Center issue (bug #69031) 
  - Tiny tweaks to kdebase .desktop files (bug #69002)
  - Added some hacks for KDE screen savers


author: Than Ngo <than@redhat.com> 3.0.2-3
changelog:
  - Added patch in konqueror, it should search pluggins on mozilla directory (bug #68599)
  - Fixed a bug in merging /etc/X11/applnk (bug #64919,64594)
  - Added patch for merging /var/lib/menu/kde
  - Fixed a bug in kcontrol, it should search screensavers in /var/lib/menu/kde
  - Added desktop-create-kmenu
  - Added fix for building against g++-296 (bug #68752)
  - Added fix in KDE font installer using xfs reload (bug #64664) (rdieter@math.unl.edu)
  - Fixed refresh issue in konsole (Harald Hoyer)
  - Fixed font issue in konsole (bug #68476)
  - Fixed font issue in terminal emulation under Konqueror (bug #68618)
  - correct fonts in KDE startup (bug #68872)
  - Redhat Style Kwin has opaque resize as default (bug #68401)
  - AntiAliasing on as default in Redhat Style Wonderland
  - Added missing screensave desktop files
  - Rename the section in screen save desktop files
  - Don't strip binaries
  - get rid of wallpapers, requires desktop-backgrounds-basic,
    wallpapers are now in desktop-backgrounds-basic
  - Fixed colorScheme issue in kpersonalizer
  - Added floppy unit icon missing on desktop (bug #68890)
  - Adapted kdebase to new desktop background framework (bug #66784)
  - 3.0.2 fixed bug #63700


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Change defaults
  - Add the vfolder ioslave
  - Add hacks to launch desktop-create-kmenu when needed, merge /etc/kde/menu


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-9
changelog:
  - Try to fix bug #60811 (kpersonalizer now sets default fonts for CJK)
  - Put kicker configuration back in kpersonalizer (#61266) and make sure the
    minimal variant is selected for extremely low resolutions (#63266)


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-7
changelog:
  - Fix default kicker config - it shouldn't point to absolute paths (#62355)
  - Add build requirement on samba >= 2.2.3a-5 to build the correct smb
    ioslave (#62202)


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-5
changelog:
  - Add fixes from KDE_3_0_BRANCH, except for the "F1 in konsole" change
    (that one breaks things)
  - Don't show Taiwanese flag for zh_CN (#61946)
  - Move in Red Hat splash screen


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-4
changelog:
  - Fix issues with multiple instances of kbookmarkeditor being opened
    at the same time
  - Remove the static cdparanoia hack, we're shipping shared cdparanoia
    libs these days.


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-3
changelog:
  - Merge patches from KDE_3_0_BRANCH:
    - Fix konsole crash
    - Fix Comment vs. GenericName issue in kcm_kdm
    - Fix memory leak in kcontrol


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-0.cvs20020314.1
changelog:
  - Add patch from Than to scale down icons for submenus pointing to legacy
    applications rather than keeping them at 32x32


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.2-0.cvs20010805.1
changelog:
  - Fix anti-aliased fonts
  - Remove Japanese konsole patch, it breaks changing fonts in all other
    languages
  - BuildRequire lesstif-devel to make sure recompiled versions of Konqueror
    support Netscape plugins
  - Remove language detection hacks from startkde, they're now in kpersonalizer
  - Personalize kicker in kpersonalizer
  - Power off when halting the system in kdm (#50847)


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.2-0.cvs20010731.1
changelog:
  - Remove some patches that made it into cvs
  - Fix up the Japanese patch, it messed up konsole fonts on "normal"
    languages


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.2-0.cvs20010721.1
changelog:
  - rebuild - somehow an application got linked against an older version of
    itself from the buildroot
  - update


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.2-0.cvs20010720.1
changelog:
  - update
  - get rid of some rpmlint warnings
  - remove kappfinder (we maintain /etc/X11/applnk)
  - work around ia64 breakage


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.2-0.alpha2.2
changelog:
  - Work around NFS-mounted home directories residing on servers with
    ultimately broken OSes (#40711)
  - Fix desktopconv compilation without optimizations (#40144)
  - Move old config files rather than deleting them (#38107)
  - Add explicit requirements on lm_sensors and kdelibs-sound (#32678)
  - Fix doc generation (#40087)
  - s/Copyright:/License:/


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.2-0.cvs20010513.1
changelog:
  - Fix up default settings; KSpell should use Aspell right away
  - Split out -devel subpackage; with KWin and Kate moving to plugin systems,
    this is getting big...


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.2-0.cvs20010512.1
changelog:
  - Update, adapt patches
  - Fix up desktop devices patch, we want the "Eject" action for CD-ROMs,
    CD-Writers, CD-RWs, ZIP and JAZ-Drives and LS120.


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix deadkeys handling in kdm
  - Fix uninitialized variable in konsole, patch
    from Tim Waugh (#34452)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix rpmfind shortcut (Bugzilla #34057, KDE Bug #21100)
  - Add patch from KDE_2_1_BRANCH to get rid of debug output in
    the ktar IO slave


author: Than Ngo <than@redhat.com>
changelog:
  - fix charmap/encoding problem
  - fix MinimumFontSize in konqueror, default is 10
  - set correct DefaultEncoding for konqueror
  - clean up startkde
  - disable Israel and Thai, it's broken in qt


author: Preston Brown <pbrown@redhat.com>
changelog:
  - remove CD-ROM / Floppy .desktop files, they are generated automatically now
  - remove some other old obsolete default config files


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.1.1-2
changelog:
  - Log utmp/wtmp correctly in konsole, using utempter
  - Remove setuid state from konsole_grantpty, it's no longer needed now
    that we use utempter.
  - Fix escaping in the konsole KPart
  - Fix grammar and order in the arts control module


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.1.1-1
changelog:
  - 2.1.1
  - Don't crash if kfmexec is invoked without arguments (#32029)
  - Various desktopconv fixes:
    - Allow removing or ignoring KDE 1.x files
    - convert the printer icon we had on the desktop by default.
    - Support i18n
  - Add mailsettings tool (generates sane kcmemail defaults at first
    startup)
  - Fix up support for Brazil Portuguese and Chinese
  - Fix loading of child panel config files (harald)
  - remove -T and --title in konsole, use instead --caption (#31483) (Than Ngo)
  - More i18n fixes (zh_HK is closer to zh_TW than to zh_CN...)


author: Than Ngo <than@redhat.com>
changelog:
  - fix Login Screen Red Hat logo (Bug #32241)
  - fix kdm background color
  - fix a bug in setting font size (Bug #32258)


author: Than Ngo <than@redhat.com> 2.1-11
changelog:
  - fix placed icons on desktop (Bug #31985)
  - some bugfixes in startkde
  - restore support for Russian (bero)
  - merge bugfix patch from KDE_2_1_BRANCH, Ctrl-U could crash Konqueror
    under certain circumstances (bero)
  - Fix up the effects patch (if everything was disabled, no radio button
    was checked by default, rather than the "No effects" button) (bero)


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.1-10
changelog:
  - Fix up i18n support
  - Don't use predictable tmp file names in krdb
  - Remove the printer icon from the desktop. It uses klpq which is in kdeutils,
    so the icon should come from there.
  - fix error.c in kdebase-2.1-fixes.patch, It's broken (Than Ngo)
  - better fix for konsole keyboard mappings (Preston Brown)


author: Than Ngo <than@redhat.com>
changelog:
  - fix default profile for konqueror in webbrowser mode 
  - set lucidatypewriter as fixed-width font for konqueror


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.1-9
changelog:
  - Fix locale settings (old versions didn't check the user's locale settings
    and always started up in English)
  - Fix some braindead code in kwrite


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.1-8
changelog:
  - Add option to save backtraces to a file (#30867)
  - Fix kdm looking horrible on 8 bit displays
  - Revert to /usr/share/config with an exception for kdmrc
  - Add /etc/skel/Desktop/.directory (the /etc/skel/Desktop/* glob doesn't include
    /etc/skel/Desktop/.* ...)
  - Don't apply konsole-noxft patch anymore (workaround for an X bug
    that was fixed in 11.4)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - /usr/share/config -> /etc/kde
  - Don't throw all config files at every user's home directory; 2.x supports
    changing global defaults
  - Get rid of bogus "can't find schema named" warning
  - Fix various bugs in konsole (don't connect to a NULL slot, etc.)
  - Cripple kxmlrpcd by default (#23253)
  - Add a sane icon arrangement at first startup (#25026)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Add fixes from KDE_2_1_BRANCH:
    - Fix up cookie handling in konqueror
    - Fix a potential crash in kcontrol when using config files from
      cvs snapshots
    - Fix possible khotkeys segfault
  - Fix up Konqueror User Agent dialog
  - Log in to "default" session by default (#29157)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix up konsole_grantpty to work with the /dev/pts filesystem and
    /dev/ptmx rather than the old /dev/ptyXX system
  - Replace ktip logo with Red Hat logo, the old one could be considered
    offensive by some people
  - Fix build with glibc 2.2.2
  - Turn off icon view in kdm
  - Other minor changes to default config


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - desktopconv: Don't strip off .png/.xpm/.gif in Icon= if it is
    provided as a full pathname
  - Build with --disable-debug
  - Fix a bug causing all icons to appear in the upper-left corner
  - Don't use antialiased fonts in konsole even if they're turned on.
    Konsole can't deal with them.
  - Don't show the postgres and amanda users in kdm
  - Add rhbug/bz shortcut to Bugzilla
  - Add ftpsearch/fs shortcut to FTP Search
  - Add "Eject" option to CD-ROM icon (RFE #26301)
  - Fix permissions on some files in /etc/skel/Desktop (having them readable
    by root only is not really useful ;) )
  - Fix PAM exiting (#25232, Patch from Tim Waugh)
  - Fix utmp handling in konsole (Bug #25048)
  - Rewrite desktopconv and run it from startkde, ensures
    clean updates from KDE 1.x (Bug #25473)
  - Add $HOME/bin to PATH in kdm (Bug #25743)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Link the greeter into kdm statically, pulling in libpthreads
    Fixes crash with glibc-2.2.1-3 i686


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Turn off anti-aliasing by default
  - Restore the turning AA on/off and "apply styles to non-KDE-apps"
    functionality, someone managed to break them just in time for
    2.1 beta 2.


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Kill /usr/share/icons/hicolor/22x22/actions/view_tree.png, it's in
    kdelibs
  - restore missing /etc/kderc (Bug #24601)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update CVS (fixed #24298, #24242)
  - Hack in support for turning anti-aliasing on and off, as requested
    by Than. Unfortunately, this patch probably won't go into the base 2.1
    because of the message freeze.


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - kdm shouldn't show gdm and mailnull users (#23136)
  - don't install the konsole fonts, they're now
    included in XFree86 (#23467)
  - Obsoletes kdebase2 (from 7.0-preview)
  - Add config files (used to be in kdesupport) (#22601)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update
  - Obsolete kdebase-3d-screensavers, kdebase-locolor-icons,
    kapm kcmlaptop (optional stuff from KDE 1.x)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Some fixes to startkde:
    - if /etc/skel/.kde doesn't exist, don't copy it
    - remove stale .DCOPserver* files at startup
  - Rebuild with fixed kdoc


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Move include files to /usr/include/kde
  - Don't install any of the mini-lesstif files, we need them at
    build time only
  - Fix consolehelper config for kappfinder


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update to KDE_2_0_BRANCH, now that the ".0 release" bugs are fixed
  - Get rid of the Red Hat menu, it's merged now
  - Fix up the gdm session file
  - Fix up kappfinder, run it through consolehelper (Bug #19903)
  - Enable Netscape plugin support, add a stripped down version of lesstif
    to allow this


author: Adam Jackson <ajax@redhat.com> 0.17.7-2
changelog:
  - rhgb-0.17.7-strict-exit.patch: Don't tell rhgb-client we're done until
    we've really shut down X.  (#323501)


author: Ray Strode <rstrode@redhat.com> - 0.17.6-7
changelog:
  - don't show strings like 
    "Starting random number generator"
    and
    "Starting console mouse services"
    anymore, since the subset we support aren't that good
    anyway, and it causes a lot of stutter when booting


author: Ray Strode <rstrode@redhat.com> - 0.17.6-4
changelog:
  - don't go to details view after timeout (bug 251321)
  - don't revert from details view if user explicitly picked it 
    (bug 151239)


author: Adam Jackson <ajax@redhat.com> - 0.16.4-4
changelog:
  - rhgb-0.16.4-wait-for-server-to-exit.patch: Added, wait for the X server
    to shut down before exiting.


author: Ray Strode <rstrode@redhat.com> - 0.16.4-2
changelog:
  - don't execute interactive bash shell during setup (bug 209457)
  - drop the change vts code in the exit path, Adam Jackson says 
    that the code is dead code and X will do the right thing.


author: Ray Strode <rstrode@redhat.com> - 0.16.3-6
changelog:
  - don't SIGKILL X server
  - wait for signal from X server that it's ready instead of
    just launching it an hoping for the best
  - only vt switch if things go bad, X and gdm will handle 
    making sure the right vt is active.
  - don't ever change the busy cursor to not busy (if we're not
    busy then rhgb shouldn't be running).


author: Mike A. Harris <mharris@redhat.com> 0.16.3-5
changelog:
  - Bump libxf86config-devel dep to ensure the fix for (#198653) is present.
  - Ensure the package has ownership of the dirs it creates.
  - Use Fedora Extras style BuildRoot tag.


author: Ray Strode <rstrode@redhat.com> - 0.16.3-4
changelog:
  - remove erroneous space from x conf filename.  Problem discovered
    from Mary Ellen Foster <mefoster@gmail.com> (bug 196885)


author: Ray Strode <rstrode@redhat.com> 0.16.2-13
changelog:
  - Don't run /sbin/chvt and never call waitpid on child.  Instead
    just change vts using the VT_ACTIVATE ioctl.  Patch from Peter
    Jones <pjones@redhat.com>.
  - Get rid of some other calls to waitpid and just let glib
    handle it.  The code was ignoring the return values anyway...
  - add a buildreq on libxf86config-devel


author: Ray Strode <rstrode@redhat.com> 0.16.2-10
changelog:
  - Don't switch out of details view if the user switched into
    it intially.  Patch from Mary Ellen Foster <mefoster@gmail.com>
    (bug 151239).


author: Ray Strode <rstrode@redhat.com> 0.16.2-9
changelog:
  - add BuildRequires: gettext
  - don't build in-tree copy of gtkexpander.c
  - don't switch to vt1 automatically after 35 seconds (bug 135783)


author: Daniel Veillard <veillard@redhat.com> 0.16.1
changelog:
  - switch to display :9 to fix #139704
  - delay creation of the fifo after X initialization to avoid deadlock
    with initscripts if X fails to start #135574
  - cleanup in case of deadly signal received
  - improved the debugging layer to chase aformentioned bugs.
  - po/*: update the translations


author: Elliot Lee <sopwith@redhat.com> 0.13.5-2
changelog:
  - rhgb-0.13.5-firstboot patch - don't do a timeout while we're running firstboot- Use _smp_mflags macro


author: Daniel Veillard <veillard@redhat.com> 0.13.2
changelog:
  - add support for specific conf file in /etc/rhgb/xorg.conf #131063
  - avoid dropping back to text mode between rhgb end and gdm #108665


author: Daniel Veillard <veillard@redhat.com> 0.13.1
changelog:
  - fix vt1 switching #131899
  - fix fsck reporting, exporing it to the vte, requires a patch to
    initscript too #107121, #129881
  - move temp fielsystem to /etc/rhgb/temp
  - provide a mechanism to output to the detailed view
  - automatically switch to detailed view or vt1 on timeouts


author: Rex Dieter <rexdieter[AT]users.sf.net> - 0.7.1-0.lvn.3
changelog:
  - update-desktop-database (#645)
  - -devel pkg (#645)
  - -gstreamer subpkg, marked experimental (due to upstream #1254363)
  - omit -desktop patch (#645)
  - use desktop-file-install (#645)


author: Ville Skyttä <ville.skytta at iki.fi> - 0:0.7-0.lvn.1
changelog:
  - 0.7, now with DVB support (FC4+ only).
  - GStreamer support disabled by default due to upstream #1254363, rebuild
    with "--with gstreamer" to enable.
  - Quick and dirty workaround for upstream #1253989.


author: Ville Skyttä <ville.skytta at iki.fi> - 0:0.5-0.lvn.0.1.rc1
changelog:
  - Update to 0.5rc1.
  - Requires KDE >= 3.2 -> FC2 only -> make some related cleanups.
  - Purge libselinux workarounds, no longer needed.
  - Improve GNOME HIG compliance of desktop entry, sync with KPlayer (bug 173).
  - Disable dependency tracking to speed up the build.
  - Provide -devel.


author: Dries Verachtert <dries@ulyssis.org> 0.9.2-3
changelog:
  - moved the apollon menu entry to 'more internet applications'
    bug found by Sindre Pedersen Bjørda, thanks!


author: Rex Dieter <rdieter[AT]fedoraproject.org> - 6:3.5.8-6
changelog:
  - -libs: Obsoletes: %name ... to help out multilib upgrades
  - -extras-libs: Obsoletes %name-extras ... likewise


author: Rex Dieter <rdieter[AT]fedoraproject.org> - 6:3.5.7-2
changelog:
  - (re)include kfile_mp3, kfile_mpeg, providing (konq) meta-info support
    (not nonfree decoders)
  - License: GPLv2+
  - Provides: kdemultimedia3(-devel) ...


author: Than Ngo <than@redhat.com> 6:3.5.1-2
changelog:
  - add missing protocol audiocd #176637
  - remove useless rpm macro #180009
  - add requires on alsa-lib-devel #178734


author: Than Ngo <than@redhat.com> 3.2.1-2.1
changelog:
  - add Buildrequires on cdparanoia-devel if cdparanoia is installed, bug #120245
  - fix gcc build problem


author: Thomas Woerner <twoerner@redhat.com> 3.1-0.5
changelog:
  - rc6
  - fixed epoch for devel package
  - no global cddb directory anymore
  - removed size_t check
  - exclude ia64


author: Elliot Lee <sopwith@redhat.com> 3.1-0.4
changelog:
  - Don't exclude Alpha
  - Instead of turning off detection of unpackaged files/missing doc files,
    fix the problems.


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-3
changelog:
  - Make sure we link to the just built libraries instead of libs in the
    build environment from older releases


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-2
changelog:
  - Update ABI
  - Add cdrecord/mkisofs requirements for KOnCD (#63606)
  - Tell koncd where to find cdrecord and mkisofs (#63604)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Remove copyrighted midi files (#26431)
  - Use a real file list rather than find/sed (#26565)
  - Fix build with current glibc


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Replace absolute symlinks with relative ones (#24794)
  - Don't use more than 2 CPUs at build time to shut up asok


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Change the kmix error message (Bug #9065)
  - Fix kmidi behavior when trying to play an empty playlist (Bug #8843)
  - Fix compilation with kernel 2.3.x headers


author: Warren Togami <wtogami@redhat.com> - 0.5.2-11
changelog:
  - compiz-gnome: install core schema so it actually works
  - remove unnecessary gconf stuff from %install


author: Kristian Høgsberg <krh@redhat.com> - 0.5.2-9
changelog:
  - Make compiz-gnome Obsolete the older compiz package so yum/anaconda
    will pull it in (thans to Adel Gadllah).


author: Kristian Høgsberg <krh@redhat.com> - 0.5.2-8
changelog:
  - Bump to desktop-effects 0.7.7 to avoid kill decorator when popping
    up dialog.
  - Fix broken gconf install and uninstall rules.
  - Pick up shadowman logo for RHEL builds (#232398).


author: Kristian Høgsberg <krh@redhat.com> - 0.5.2-7.0ec3ec
changelog:
  - Add more-sm-junk.patch so we set SM restart style to
    SmRestartIfRunning on exit (#247163, #245971).
  - Add Requires to compiz-devel (#253407).
  - Update to desktop-effects 0.7.6, which terminates decorator when
    switching to metacity or on compiz failure (#215247, #215032).


author: Kristian Høgsberg <krh@redhat.com> - 0.5.2-5.0ec3ec
changelog:
  - Reorder plugin list to avoid 'place' getting removed on startup.
  - Add run-command-key.patch to put the run command key in the GNOME
    keyboard shortcut dialog (#213576).
  - Drop a bunch of obsolete patches.
  - Bump mesa-libGL and X server requires to fix TFP bugs for
    power-of-two textures (#251935).
  - Rebase fedora-logo and composite-cube-logo patch.


author: Kristian Høgsberg <krh@redhat.com> - 0.5.2-3.0ec3ec
changelog:
  - Build git snapshot from fedora branch at
    git://people.freedesktop.org/~krh/compiz, brances from 0.6 upstream
    branch.
  - Fixes #237486.


author: Kristian Høgsberg <krh@redhat.com> - 0.5.2-3
changelog:
  - Require desktop-effects 0.7.3 and gnome-session 2.19.6-5 which pass
    'glib' on the command line too.


author: Kristian Høgsberg <krh@redhat.com> - 0.5.2-1
changelog:
  - Update to 0.5.2.
  - Require at least gnome-session 2.19.6-2 so gnome-wm starts compiz
    with LIBGL_ALWAYS_INDIRECT set.


author: Kristian Høgsberg <krh@redhat.com> - 0.3.6-5
changelog:
  - Update URL (#208214).
  - Require at least metacity 2.18 (#232831).
  - Add close-session.patch to deregister from SM when replaced (#229113).


author: Kristian Høgsberg <krh@redhat.com> 0.3.6
changelog:
  - Require gnome-session > 2.16 so it starts gtk-window-decorator.
  - Update to desktop-effects 0.7.1 that doesn't refuse to work with Xinerama.


author: Kristian Høgsberg <krh@redhat.com> - 0.3.6-1
changelog:
  - Update to 0.3.6, update patches.
  - Drop autotool build requires.
  - Drop glfinish.patch, cow.patch, resize-offset.patch and icon-menu-patch.
  - Add libdecoration.so
  - Update to desktop-effects-0.7.0, which spawns the right decorator
    and plays nicely with unknown plugins.


author: Soren Sandmann <sandmann@redhat.com> - 0.0.13-0.32.20060818git.fc6
changelog:
  - Install the .desktop file with desktop-file-install. Add X-Red-Hat-Base to make it appear in "Preferences", rather than "More Preferences".


author: Soren Sandmann <sandmann@redhat.com>
changelog:
  - Change default plugin list to not include the plane plugin. (Bug 208448).
  - Change default keybinding for shrink to be Pause (Bug 206187).


author: Soren Sandmann <sandmann@redhat.com> - 0.0.13-0.29.20060817git.fc6
changelog:
  - Add restart.patch to make compiz ask the session manager to restart it
    if it crashes (bug 200280).


author: Soren Sandmann <sandmann@redhat.com> - 0.0.13-0.28.20060817git.fc6
changelog:
  - Change plane.patch to not do cyclical window movement in dimensions
    where the desktop has size 1 (bug 207263).


author: Soren Sandmann <sandmann@redhat.com> - 0.0.13-0.27.20060817git.fc6
changelog:
  - Change .plane patch to 
    (a) not set the background color to pink in the plane plugin. 
    (b) allow workspaces with horizontal sizes less then 4.


author: Soren Sandmann <sandmann@redhat.com>
changelog:
  - Run update-desktop-database and gtk-update-icon-cache in post. Add icons
    to list of packaged files. Also bump to 0.6.137 of dialog (which just makes
    directories before attempting to install to them).


author: Soren Sandmann <sandmann@redhat.com>
changelog:
  - Upgrade to 0.6.107 of the desktop-effects dialog box. Only change is
    that the new version has icons.


author: Kristian Høgsberg <krh@redhat.com> - 0.0.13-0.21.20060817git.fc6
changelog:
  - Drop gl-include-inferiors.patch now that compiz uses COW and the X
    server evicts offscreen pixmaps automatically on
    GLX_EXT_texture_from_pixmap usage.


author: Kristian Høgsberg <krh@redhat.com> - 0.0.13-0.17.20060817git.fc6
changelog:
  - Add patch from upstream to also use sync protocol for override
    redirect windows (sync-override-redirect-windows.patch).


author: Kristian Høgsberg <krh@redhat.com> - 0.0.13-0.16.20060817git.fc6
changelog:
  - Rebase to latest upstream changes which has the rest of the bindings
    rewrite.  Add resize-move-keybindings.patch to make move and resize
    bindings work like metacity.
  - Add back scale plugin.


author: Ray Strode <rstrode@redhat.com> 0.0.13-0.15.20060721git.fc5.aiglx
changelog:
  - Add Requires: gnome-session 2.15.90-2.fc6 (bug 201473)
  - unlink session file on changing wms (bug 201473)


author: Andrew Overholt <overholt@redhat.com> 3.3.0-29
changelog:
  - Move popd at end of %install to allow aot-compile-rpm to allow it to
    use the current directory for its temp directory.


author: Andrew Overholt <overholt@redhat.com> 3.3.0-24
changelog:
  - Update branding plugin.
  - Add branding feature.  This fixes the update manager issue when using
    the Fedora-branded product.
  - Thanks to Alexander Kurtakov and Pascal Rapicault for helping track
    down this issue.


author: Andrew Overholt <overholt@redhat.com> 3.3.0-23
changelog:
  - Build gcj bits on x86 and x86_64.
  - Add instructions for how to get source of branding plugin.
  - Fix splash screen typo.
  - Resolves:  rhbz#301871.


author: Andrew Overholt <overholt@redhat.com> 3.3.0-21
changelog:
  - Add patch to generate 1.6 bytecode on a 1.7 VM (kudos to Olivier
    Thomann)
  - Resolves:  rhbz#288991.


author: Andrew Overholt <overholt@redhat.com> 3.3.0-15
changelog:
  - Update tomcat5, commons-el, and commons-logging to required releases
    with proper OSGi manifests.


author: Ben Konrath <bkonrath@redhat.com> 3.3.0-13
changelog:
  - Move *-sdk subpackages to pde subpackage.
  - Add BuildRequires: libXt-devel for IcedTea build.
  - Add launcher-fix-java-home.patch.


author: Ben Konrath <bkonrath@redhat.com> 3.3.0-12
changelog:
  - Require mylyn on all archs except ppc64 alpha.
  - Use IcedTea on x86_64 and x86.
  - Remove hacks for s390{,x} as they are now included in upstream build.


author: Ben Konrath <bkonrath@redhat.com> 3.3.0-10
changelog:
  - Add requires eclipse-cvs-client, eclipse-subclipse, eclipse-mylyn,
    eclipse-mylyn-ide, eclipse-mylyn-bugzilla, eclipse-mylyn-trac
    and eclipse-changelog to platform package.
  - Add requires eclipse-mylyn-java to jdt.
  - Add requires eclipse-mylyn-pde to pde.
  - Remove pde-sdk and sdk sub-packages


author: Ben Konrath <bkonrath@redhat.com> 3.3.0-8
changelog:
  - Link to junit4 jar.
  - Remove included eclipse binaries.
  - Add Provides: eclipse to sdk subpackage.


author: Ben Konrath <bkonrath@redhat.com> 3.3.0-6
changelog:
  - Add links for jsp api, servlet api and jasper.
  - Add %{_libdir}/%{name}/features to the rcp %files listing.


author: Ben Konrath <bkonrath@redhat.com> 3.3.0-3
changelog:
  - Add links for lucene and lucene.analysis.
  - Remove icu4j symlink from /usr/share/eclipse/plugins.
  - Resolves: #248749.


author: Ben Konrath <bkonrath@redhat.com> 3.3.0-2
changelog:
  - Fix dep in rcp sub-package.
  - Add Alpha support.
  - Link to commons-logging.jar
  - Resolves: #248359.


author: Ben Konrath <bkonrath@redhat.com> 3.3.0-0.2.RC4
changelog:
  - Use icu4j-eclipse sub-package instead of building icu4j here.
  - Use exec in binary wrapper.
  - Add 3.3.0 splashscreen.


author: Ben Konrath <bkonrath@redhat.com> 3.3.0-0.1.M5eh
changelog:
  - 3.3M5.
  - Remove launcher-addplatformtotildeeclipse.patch as it's only needed 
    for FC-5 -> FC-6.
  - Remove swt firefox patches as they are no longer needed.
  - Remove ppc64, s390{,x} and sparc{,64} support.
  - Remove use-built-launcher patch.
  - Update set-launcher-and-configuration-dir patch.


author: Andrew Overholt <overholt@redhat.com> 3.2.1-23
changelog:
  - Move back to ~/.eclipse for update site pending upstream comments.
  - Add patch to add platform to ~/.eclipse's platform.xml.  This maintains
    user-installed plugins but allows us to remove the pre-configured
    platform.xml in the OSGi configuration area.


author: Ben Konrath <bkonrath@redhat.com> 3.2.1-17
changelog:
  - Add file level requirement for swt fragment to rcp and platform packages.
    This is needed so that the rcp and platform packages pull in the swt package
    of the correct word size.


author: Ben Konrath <bkonrath@redhat.com> 3.2.1-16
changelog:
  - Move copy-platform back to %{_datadir}/eclipse.
  - Require gjdoc >= 0.7.7-14 as it generates consistent html across archs.
  - Move most of the doc plugins back to %{_datatdir}/eclipse now that gjdoc 
    is fixed.


author: Andrew Overholt <overholt@redhat.com> 3.2.1-15
changelog:
  - Make sdk require config.ini itself rather than the package to deal with the
    bi-arch installation situation.
  - Move sdk feature and plugin to %{_libdir} so we can check for its existence
    in the post scripts.


author: Andrew Overholt <overholt@redhat.com> 3.2.1-14
changelog:
  - Remove post sections that munge eclipse.product; always set it to
    org.eclipse.platform.ide or org.eclipse.sdk.ide.
  - Remove changelogs prior to 3.2.0.


author: Ben Konrath <bkonrath@redhat.com> 3.2.1-12
changelog:
  - Move doc plugins to %{_libdir}/eclipse/plugins because of html is being
    generated differently on different arches.
  - Fix multilib problem when there are two or more jars within a jar.
  - BR dos2unix always (for mac2unix).


author: Ben Konrath <bkonrath@redhat.com> 3.2.1-11
changelog:
  - Move copy-platform to %{_libdir}/eclipse
  - Move the platform.source, icu4j, icu4j.source, help.webapp and
    update.core.linux plugins to %{_libdir}/eclipse/plugins because these plugins
    have platform specific content. Some of the platform specific content may be
    a result of bugs in libgcj. These need to be investigated.
  - Disable building the help indexes on all archs so that we have the same doc
    plugins on all archs.
  - Remove org.apache.ant_1.6.5/bin/runant.py to avoid multilib conflicts.
  - Repack all the jars and the jars within those jars. This is needed 
    to make this package multilib compatible.
  - Put SWT symlinks in %{_libdir}/eclipse instead of 
    %{_libdir}/eclipse/plugins.


author: Andrew Overholt <overholt@redhat.com> 3.2.1-11
changelog:
  - Use equinox initializer instead of old patch to core.runtime.
  - Run initializer *after* splitting install into arch-specific and
    arch-independent locations.
  - Move copy-platform to arch-specific location.
  - Get rid of broken symlinks in tomcat plugin.


author: Ben Konrath <bkonrath@redhat.com> 3.2.1-10
changelog:
  - Add 3.2.1 splash screen.
  - Sort the java source files before building (#209249).
  - Remove Fedora ifdefs.
  - Resolves: #209249.


author: Andrew Overholt <overholt@redhat.com> 3.2.1-8
changelog:
  - Fix eclipse-ecj symlink to point to correct location.
  - Put SWT symlinks in %{_libdir} instead of %{_datadir} as they're
    target-dependent.


author: Ben Konrath <bkonrath@redhat.com> 3.2.1-7
changelog:
  - Add patch for ecj [] classpath problem.
  - Remove configuration files from rcp files list. 
  - Add patch set bindir and shared config patch to allow the eclipse binary
    to sit in %{_bindir} and remove the symlinks. This patch also allows us to
    set osgi.sharedConfiguration.area config on a per build basis so that the
    configuration directory can be arch dependant.
  - Remove launcher link patch as the bindir patch removes the requirement for
    this patch.
  - Don't aot-compile org.eclipse.ui.ide to work around rh bug # 175547.
  - Add Requies(post,postun) to all packages to ensure that no files are left
    behind when eclipse is un-installed.
  - Many spec file clean ups.
  - Resolves: #199961, #202585, #210764, #207016.
  - Related: #175547.


author: Ben Konrath <bkonrath@redhat.com> 3.2.1-5
changelog:
  - Remove perl dependancy.
  - Fix offsets in libswt-enableallandO2 patch.
  - Add Requires(post,postun) java-gcj-compat to sdk to avoid errors when
    uninstalling the java stack.
  - Move jface and jface.databinding from libswt3-gtk2 to rcp because these
    plugins have dependancies on some plugins in rcp.


author: Ben Konrath <bkonrath@redhat.com> 3.2.1-3
changelog:
  - Add Requires(post,postun) to platform and sdk sub-packages so that post and
    postun scripts work correctly.


author: Ben Konrath <bkonrath@redhat.com> 3.2.1-0.RC.1
changelog:
  - M20060921-0945 (3.2.1 pre-release).
  - Upadate patches to 3.2.1.
  - Add icu4j 3.4.5 sources.
  - Add Fedora version to platform about.mappings as well as sdk.


author: Ben Konrath <bkonrath@redhat.com> 3.2.0-7
changelog:
  - Use real SWT version on ia64, ppc64, s390 and s390x.
  - Remove the swt native libs from the rcp sub-package because they are 
    already in the libswt-gtk2 sub-package and rcp requires libswt-gtk2.
  - Set correct eclipse.product in post and postun of sdk and platform
    sub-packages (rh bug # 207442)
  - Don't set the .eclipseproduct twice.
  - Add Conflicts: mozilla to libswt3-gtk2 (rh bug # 207626).
  - Move Requires: firefox to libswt3-gtk2.


author: Andrew Overholt <overholt@redhat.com> 3.2.0-7
changelog:
  - Add workaround for gjdoc Mac-encoded bug (gcc#29167) to make javadocs build.
  - Fix tomcat symlinking in %install to make help work (rh#199453).


author: Ben Konrath <bkonrath@redhat.com> 3.2.0-6
changelog:
  - Update swt-firefox patch and remove libswt-xpcom patch (rh bug # 200929).
  - Re-work files list to match upstream and remove rebuild-sdk-features 
    (rh bug # 205933).


author: Ben Konrath <bkonrath@redhat.com> 3.2.0-5
changelog:
  - Add swt-firefox patch; moves SWT to NS_InitXPCOM3() from NS_InitEmbedding().
  - Add sparc support (Dennis Gilmore <dennis@ausil.us>).
  - Disable help index generation on s390.


author: Ben Konrath <bkonrath@redhat.com> 3.2.0-4
changelog:
  - Re-add customBuildCallbacks.xml-add-pre.gather.bin.parts.patch because
    it has not been applied upstream.
  - Minor spec file clean ups.
  - Add %{name} to the -devel package Provides so that upgrading from 
    FC-5 to FC-6 works.
  - Re-enable natively compiling the ant.ui plugin.
  - Re-enable natively compiling the team.cvs.core plugin on ia64.


author: Andrew Overholt <overholt@redhat.com> 3.2.0-1jpp_11fc
changelog:
  - Fix eclipse-tomcat55.patch and eclipse-tomcat55-build.patch to not reference
    jars that don't exist.
  - Fix rebuild-sdk-features to work with 3.2.x feature versions.


author: Andrew Overholt <overholt@redhat.com> 3.2.0-1jpp_10fc
changelog:
  - Use firefox-devel instead of mozilla-devel.
  - Add patch for rh#200929 (include embed_base in xpcom's pkgconfig -I flags).


author: Andrew Overholt <overholt@redhat.com> 3.2.0-1jpp_1fc
changelog:
  - Temporarily add webapp patch for ppc64 and s390x.
  - Bump tomcat5 to 5.5.17 both in BR/R and in patches.


author: Andrew Overholt <overholt@redhat.com> 3.2.0-1jpp_1fc
changelog:
  - Don't require tomcat on ppc64, s390, or s390x until we've got it there.
  - org.eclipse.tomcat -> org.eclipse.tomcat/lib.
  - Update webapp build patch.
  - Use commons-* instead of jakarta-commons-*.
  - Don't delete jars in %install.
  - Don't apply tomcat and webapp patches on ppc64, s390, and s390x (for now).
  - Don't include tomcat jars in %files for ix86, ppc, x86_64, ia64.
  - Use tomcat plugin version instead of org.eclipse.tomcat_*.


author: Andrew Overholt <overholt@redhat.com> 3.2.0-1jpp_1fc
changelog:
  - 3.2.0.
  - Remove Provides:  eclipse-sdk from eclipse-platform.
  - Use build-jar-repository where appropriate.


author: Ben Konrath <bkonrath@redhat.com> 3.2.0-0jpp_0fc.3.2RC7.7
changelog:
  - Rename -devel packages to -sdk to match upstream names.
  - Add Provides eclipse-sdk to platform-sdk. 
  - Remove zip re-pack code.


author: Ben Konrath <bkonrath@redhat.com> 3.2.0-0jpp_0fc.3.2RC7.4
changelog:
  - Require java-gcj-compat 1.0.52.
  - Don't use '*' to set the quatifier name in the eclipse-ecj symlink.
  - Really fix swt symlinks rh #194500.


author: Ben Konrath <bkonrath@redhat.com> 3.2.0-0jpp_0fc.3.2RC7.3
changelog:
  - Enable ppc64, s390 and s390x.
  - Add check for jars at the end of prep.
  - Fix patch for rh #162177 (square brackets patch).
  - Fix swt symlinks rh #194500.
  - Add versionless pde.build symlink.
  - Rename efj-wrapper.sh to efj.sh.in.
  - Re-pack all zips after the build to ensure that zips have the same md5sum
    across arch re-builds. This is needed to avoid multilib conflicts.


author: Ben Konrath <bkonrath@redhat.com> 3.2.0-0jpp_0fc.3.2RC7.1
changelog:
  - 3.2RC7.
  - Remove com.jcraft.jsch_0.1.28.jar and repackage with classes from the system
    jsch.jar. 
  - Work around ia64 compile problem in aot-compile-rpm.


author: Sebastian Vahl <fedora@deadbabylon.de> - 0.6.0-2
changelog:
  - update patch: differ between different archs
  - update patch: don't hardcode the libGl versions
  - update patch: add description why not ot use emerald by default
  - add requires: xorg-x11-utils
  - add requires: pci-utils
  - add requires: glx-utils
  - add ExcludeArch for ppc64 because compiz isn't available there
  - keep timestamp of compiz-manager


author: Sebastian Vahl <fedora@deadbabylon.de> - 0.6.0-1
changelog:
  - Initial Release for Fedora
  - Usage of description and summary from SUSE's package
  - Include COPYING as extras source


author: Rex Dieter <rdieter[AT]fedoraproject.org> - 7:3.5.6-3
changelog:
  - integrate former kdegraphics-extras bits (kuickshow, OpenEXR kfile plugin)
  - drop unecessary/upstreamed kpdf-xft patch4 (kde bug #123417)
  - prune pre-3.0 changelog


author: Than Ngo <than@redhat.com> 7:3.5.4-2
changelog:
  - apply upstream patches
     fix #113635, kpdf crash
     fix #133910, Don't crash when trying to open a DVI file that has been only partially written


author: Than Ngo <than@redhat.com> 7:3.5.1-2
changelog:
  - apply patch to fix buffer overflow in kpdf, CVE-2006-0301 (#179425)
  - apply patch to fix gcc warning (#169189)


author: Than Ngo <than@redhat.com> 7:3.4.2-3
changelog:
  - backport CVS patch to fix kpdf crash when trying to
    expand sub-bookmarks in the bookmark tree #167390


author: Than Ngo <than@redhat.com> 7:3.4.2-2
changelog:
  - backport CVS patch to fix rendering problem in kpdf
  - backport CVS patch to fix bug #kde110171
  - backport CVS patch to fix bug #kde110034, #kde110000
  - backport CVS patch to fix crash in kpdf


author: Than Ngo <than@redhat.com> 3.1.2-4
changelog:
  - disable kpovmodeler temporary. waiting for freeglut
  - built with gcc-3.3-12
  - remove excludearch s390/s390x


author: Ondrej Vasik <ovasik@redhat.com> - 6.9-9
changelog:
  - applied upstream patch for runuser to coreutils-selinux.patch(#232652)
  - modified coreutils-i18n.patch because of sort -R in
    a non C locales(fix by Andreas Schwab) (#249315)
  - allow cp -a to rewrite file on different filesystem(#219900)
    (based on upstream patch)
  - License tag to GPLv2+


author: Tim Waugh <twaugh@redhat.com> 6.9-3
changelog:
  - Fixed 'ls -x' output (bug #240298).
  - Disambiguate futimens() from the glibc implementation (bug #242321).


author: Tim Waugh <twaugh@redhat.com> 6.7-9
changelog:
  - Use sed instead of perl for text replacement (bug #225655).
  - Use install-info scriptlets from the guidelines (bug #225655).


author: Tim Waugh <twaugh@redhat.com> 6.7-8
changelog:
  - Don't mark profile scripts as config files (bug #225655).
  - Avoid extra directory separators (bug #225655).


author: Tim Waugh <twaugh@redhat.com> 6.7-7
changelog:
  - Better Obsoletes/Provides versioning (bug #225655).
  - Use better defattr (bug #225655).
  - Be info file compression tolerant (bug #225655).
  - Moved changelog compression to %install (bug #225655).
  - Prevent upstream changes being masked (bug #225655).
  - Added a comment (bug #225655).
  - Use install -p for non-compiled files (bug #225655).
  - Use sysconfdir macro for /etc (bug #225655).
  - Use Requires(pre) etc for install-info (bug #225655).


author: Tim Waugh <twaugh@redhat.com> 6.7-5
changelog:
  - Removed unnecessary stuff in pre scriptlet (bug #225655).
  - Prefix sources with 'coreutils-' (bug #225655).
  - Avoid %makeinstall (bug #225655).


author: Tim Waugh <twaugh@redhat.com> 6.7-4
changelog:
  - Ship COPYING file (bug #225655).
  - Use datadir and infodir macros in %pre scriptlet (bug #225655).
  - Use spaces not tabs (bug #225655).
  - Fixed build root.
  - Change prereq to requires (bug #225655).
  - Explicitly version some obsoletes tags (bug #225655).
  - Removed obsolete pl translation fix.


author: Tim Waugh <twaugh@redhat.com> 6.7-1
changelog:
  - 6.7.  No longer need sort-compatibility, rename, newhashes, timestyle,
    acl, df-cifs, afs or autoconf patches.


author: Tim Waugh <twaugh@redhat.com> 5.97-15
changelog:
  - Fixed stat's 'C' format specifier (bug #216676).
  - Misleading 'id -Z root' error message (bug #211089).


author: Tim Waugh <twaugh@redhat.com> 5.97-10
changelog:
  - Ignore 'cifs' filesystems for 'df -l' (bug #183703).
  - Include -g/-G in runuser man page (part of bug #199344).
  - Corrected runuser man page (bug #200620).


author: Tim Waugh <twaugh@redhat.com> 5.97-6
changelog:
  - Added runuser '-g' and '-G' options (bug #199344).
  - Added su '--session-command' option (bug #199066).


author: David Howells <dhowells@redhat.com> 5.97-4
changelog:
  - split the PAM scripts for "su -l"/"runuser -l" from that of normal "su" and
    "runuser" (#198639)
  - add keyinit instructions to PAM scripts


author: Tim Waugh <twaugh@redhat.com> 5.96-4
changelog:
  - Include new hashes (bug #196369).  Patch from upstream.
  - Build at -O1 on s390 for the moment (bug #196369).


author: Dan Walsh <dwalsh@redhat.com> 5.93-6
changelog:
  - Remove pam_selinux.so from su.pamd, not needed for targeted and Strict/MLS 
    will have to newrole before using.


author: Tim Waugh <twaugh@redhat.com> 5.93-4
changelog:
  - Rebuild to pick up new glibc *at functions.
  - Apply runuser PAM patch from bug #173807.  Ship runuser PAM file.


author: Tim Waugh <twaugh@redhat.com> 5.93-2
changelog:
  - Call setsid() in su under some circumstances (bug #173008).
  - Prevent runuser operating when setuid (bug #173113).


author: Tim Waugh <twaugh@redhat.com> 5.92-0.1
changelog:
  - 5.92.
  - No longer need afs, dircolors, utmp, gcc4, brokentest, dateseconds,
    chown, rmaccess, copy, stale-utmp, no-sign-extend, fchown patches.
  - Updated acl, dateman, pam, langinfo, i18n, getgrouplist, selinux patches.
  - Dropped printf-ll, allow_old_options, jday, zh_CN patches.
  - NOTE: i18n patch not ported for sort(1) yet.


author: Dan Walsh <dwalsh@redhat.com> 5.2.1-53
changelog:
  - Allow id to run even when SELinux security context can not be run
  - Change chcon to use raw functions.


author: Tim Waugh <twaugh@redhat.com> 5.2.1-21
changelog:
  - Apply upstream patch to fix 'cp -a' onto multiply-linked files (bug #128874).
  - SELinux patch fix: don't error out if lgetfilecon() returns ENODATA.


author: Tim Waugh <twaugh@redhat.com> 5.2.1-19
changelog:
  - Added 'gnome' TERM to DIR_COLORS (bug #129112).
  - Worked around a bash bug #129128.
  - Fixed an i18n patch bug in cut (bug #129114).


author: Tim Waugh <twaugh@redhat.com> 5.2.1-9
changelog:
  - Mention pam in the info for su (bug #122592).
  - Remove wheel group rant again (bug #122886).
  - Change default behaviour for chgrp/chown (bug #123263).  Patch from
    upstream.


author: Tim Waugh <twaugh@redhat.com> 5.2.0-6
changelog:
  - Apply Paul Eggert's chown patch (bug #116536).
  - Merged chdir patch into pam patch where it belongs.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Stop 'sort -g' leaking memory (i18n patch bug #115620).
  - Don't ship kill, since util-linux already does.
  - Tidy AFS patch.


author: Tim Waugh <twaugh@redhat.com> 5.0-20
changelog:
  - Restrict ACL support to only those programs needing it (bug #106141).
  - Fix default PATH for LSB (bug #102567).


author: Tim Waugh <twaugh@redhat.com> 5.0-13
changelog:
  - Made su use pam again (oops).
  - Fixed another i18n bug causing sort --month-sort to fail.
  - Don't run dubious stty test, since it fails when backgrounded
    (bug #102033).
  - Re-enable make check.


author: Tim Waugh <twaugh@redhat.com> 5.0-12
changelog:
  - Don't run 'make check' for this build (build environment problem).
  - Another uninitialized variable in i18n (from bug #98683).


author: Tim Waugh <twaugh@redhat.com> 5.0-5
changelog:
  - Both kon and kterm support colours (bug #83701).
  - Fix 'ls -l' alignment in zh_CN locale (bug #88346).


author: Tim Waugh <twaugh@redhat.com> 4.5.10-1
changelog:
  - 4.5.10.
  - Update lug, touch_errno, acl, utmp, printf-ll, i18n, test-bugs patches.
  - Drop fr_fix, LC_TIME, preserve, regex patches.


author: Tim Waugh <twaugh@redhat.com> 4.5.3-4
changelog:
  - Fix scriplets.
  - Fix i18n patch so it doesn't break uniq.
  - Fix several other patches to either make the test suite pass or
    not run the relevant tests.
  - Run 'make check'.
  - Fix file list.


author: Tim Waugh <twaugh@redhat.com> 4.5.3-3
changelog:
  - Adapted for Red Hat Linux.
  - Self-host for help2man.
  - Don't ship readlink just yet (maybe later).
  - Merge patches from fileutils and sh-utils (textutils ones are already
    merged it seems).
  - Keep the binaries where the used to be (in particular, id and stat).


author: Thierry Vignaud <tvignaud@mandrakesoft.com> 4.5.2-2mdk
changelog:
  - fix build
  - don't chmode two times su
  - build with large file support
  - fix description
  - various spec cleanups
  - fix chroot installation
  - fix missing /bin/env
  - add old fileutils, sh-utils & textutils ChangeLogs


author: Thierry Vignaud <tvignaud@mandrakesoft.com> 4.5.2-1mdk
changelog:
  - initial release (merge fileutils, sh-utils & textutils)
  - obsoletes/provides: sh-utils/fileutils/textutils
  - fileutils stuff go in 1xx range
  - sh-utils stuff go in 7xx range
  - textutils stuff go in 5xx range
  - drop obsoletes patches 1, 2, 10 (somes files're gone but we didn't ship
    most of them)
  - rediff patches 103, 105, 111, 113, 180, 706
  - temporary disable patch 3 & 4
  - fix fileutils url


author: Rex Dieter <rdieter[AT]fedoraproject.org> 7:3.5.6-4
changelog:
  - --enable-sametime-plugin, BR: libmeanwhile-devel
  - --enable-slp, BR: openslp-devel
  - -nowlistening: --with-xmms, BR: xmms-devel
  - BR: libxml2 libxslt
  - don't use usermode(gtk) for kppp (allows users to have separate profiles)
  - Requires(hint): rdesktop (krdc)
  - Requires(hint): qca-tls (kopete: jabber/tls support)
  - fixup/simplify scriptlets


author: Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> 7:3.5.5-0.3
changelog:
  - dropped autoconf, gcc-c++, glibc-devel as BR
  - split ksirc, ktalkd and kdict as a separate package kdenetwork-extras
  - dropped requires:  kdelibs >= %{kdelibs_epoch}:%{version} already required by kdebase
  - added timestamps wherever possible


author: Than Ngo <than@redhat.com> 7:3.5.4-2
changelog:
  - apply upstream patches,
     - check the return value from XF86VidModeGetAllModeLines() to avoid crashing kde#73519
     - Fixed flickering when scrolling in newsticker kde#63494


author: Than Ngo <than@redhat.com> 7:3.4.1-2
changelog:
  - fix crash in kopete on x86_64
  - apply patch to fix libgadu vulnerabilities #163811, CVE CAN-2005-1852
    thank to kde security team


author: Than Ngo <than@redhat.com> 7:3.3.2-0.2
changelog:
  - add missing return statement, bug #142097
  - remove kdenetwork-3.3.0-kget.patch, it's included in 3.3.2
  - add CVS patch to fix memory leak


author: Than Ngo <than@redhat.com> 7:3.2.3-2
changelog:
  - add buildRequire on wireless-tools, xmms-devel (bug #124712)
  - add sub package nowlistening to get rid of xmms dependency (bug #115067)
  - fix resolv.conf problem (bug #125601, #125442)


author: Nalin Dahyabhai <nalin@redhat.com> 3.0.5-2
changelog:
  - remove directory names from the PAM configuration, allowing the same config
    file to be used for all arches on multilib systems


author: Preston Brown <pbrown@redhat.com> 3.0.3-2
changelog:
  - buildrequirement on automake15, autoconf >= 2.53
  - move kmail, kppp, kppplogview menu entries to Extras


author: Than Ngo <than@redhat.com> 3.0.2-4
changelog:
  - desktop file issues
  - Added more BuildRequires (bug #70056)
  - Added support timestamp
  - Added Node.desktop in correct package (bug #65087)
  - Fixed dangling symlink (bug #63876)


author: Christopher Aillon <caillon@redhat.com> 2.0.0.8-2
changelog:
  - Tweak the default backspace behavior to be more in line with
    GNOME convention, Mozilla upstream, and other distros


author: Christopher Aillon <caillon@redhat.com> 1.5.0.7-5
changelog:
  - Fix crash when changing gtk key theme
  - Fix gtkmozembed window visibility
  - Prevent UI freezes while changing GNOME theme
  - Remove verbiage about pango; no longer required by upstream.


author: Christopher Aillon <caillon@redhat.com> 1.5.0.6-10
changelog:
  - Enable GCC visibility
  - export XLIB_SKIP_ARGB_VISUALS=1 as a temporary workaround to prevent
    a broken Adobe/Macromedia Flash Player plugin taking the X server.


author: Christopher Aillon <caillon@redhat.com> 1.5.0.6-4
changelog:
  - Update NSS requires to workaround a bug introduced by NSS changes.
    https://bugzilla.mozilla.org/show_bug.cgi?id=294542
    https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=201922


author: Behdad Esfahbod <besfahbo@redhat.com>
changelog:
  - Add a better nopangoxft patch that doesn't depend on pangocairo
  - Add firefox-1.5-pango-mathml.patch (bug 150393)


author: Christopher Aillon <caillon@redhat.com> - 1.5.0.4-4
changelog:
  - Ugh:
    - Mozilla the platform is deprecated
    - XULrunner has been promised for a while but is still not 1.0
    - Ship a firefox-devel for now as we need a devel platform.
    - The plan is to kill firefox-devel when xulrunner 1.0 ships. 
  - Clean up the files list a little bit.


author: Christopher Aillon <caillon@redhat.com> - 1.5.0.1-9
changelog:
  - Add a notice to the about dialog denoting this is a pango enabled build.
  - Tweak the user agent denoting this is a pango enabled build.


author: Christopher Aillon <caillon@redhat.com> - 1.5-3
changelog:
  - Once again, disable ppc64 because of a new issue.
    See https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=175944


author: Christopher Aillon <caillon@redhat.com> - 1.5-0.5.0.beta1
changelog:
  - Update to 1.5 beta 1.
  - Add patch to svg rendering to adjust for cairo behavior.
  - Happy birthday, dad!


author: Christopher Aillon <caillon@redhat.com> 1.1-0.2.5.deerpark.alpha2
changelog:
  - Re-enable ppc now that its binutils are fixed.
  - Disable SVG and canvas again.  The in-tree copy does not build against new pango.
  - When clicking a link and going back via history, don't keep the link focused.


author: Christopher Aillon <caillon@redhat.com> 1.1-0.2.4.deerpark.alpha2
changelog:
  - Add patch from Christian Persch to make the file chooser modal
  - Change default behavior of opening links from external apps to: New Tab
  - New build options:
    --enable-svg
    --enable-canvas


author: Christopher Aillon <caillon@redhat.com> 1.1-0.0.1.deerpark.alpha2
changelog:
  - Update to Deer Park Alpha 2
    - STILL TODO:
      - This build is not localized yet.
      - Theme issues not yet resolved.
      - Building on ppc platforms is busted, disable them for now.
      - Forward port all remaining patches.


author: Kristian Høgsberg <krh@redhat.com> 0:1.0.4-5
changelog:
  - Add firefox-1.0-pango-cairo.patch to get rid of the last few Xft
    references, fixing the "no fonts" problem.
  - Copy over changes from FC4 branch.


author: Christopher Aillon <caillon@redhat.com> 0:1.0.4-4
changelog:
  - Only install searchplugins for en-US, since there isn't any way
    to dynamically select searchplugins per locale yet.


author: Christopher Aillon <caillon@redhat.com> 0:1.0.4-3
changelog:
  - Add support for locales:
      af-ZA, ast-ES, ca-AD, cs-CZ, cy-GB, da-DK, de-DE, el-GR,
      en-GB  es-AR, es-ES, eu-ES, fi-FI, fr-FR, ga-IE, he-IL,
      hu-HU, it-IT, ko-KR, ja-JP, ja-JPM, mk-MK, nb-NO, nl-NL,
      pa-IN, pl-PL, pt-BR, pt-PT, ro-RO, ru-RU, sk-SK, sl-SI,
      sq-AL, sv-SE, tr-TR, zh-CN, zh-TW


author: Christopher Aillon <caillon@redhat.com> 0:1.0.3-5
changelog:
  - Correctly position the IM candidate window for most locales
    Note: it is still incorrectly positioned for zh_TW after this fix
  - Add temporary workaround to not create files in the user's $HOME (#149664)


author: Christopher Aillon <caillon@redhat.com> 0:1.0.3-3
changelog:
  - Firefox script fixes to support multilib installs.
  - Add upstream patch to fix bidi justification of pango
  - Add patch to fix launching of helper applications


author: Christopher Aillon <caillon@redhat.com> 0:1.0.2-3
changelog:
  - Updated firefox icon (https://bugzilla.mozilla.org/show_bug.cgi?id=261679)
  - Fix for some more cursor issues in textareas (149991, 150002, 152089)


author: Christopher Aillon <caillon@redhat.com> 0:1.0.1-6
changelog:
  - Add patch to fix italic rendering errors with certain fonts (e.g. Tahoma)
  - Re-enable jsd since there is now a venkman version that works with Firefox.


author: Christopher Aillon <caillon@redhat.com> 0:1.0.1-3
changelog:
  - Remerge firefox-1.0-pango-selection.patch
  - Add execshield patches for ia64 and ppc
  - BuildRequires libgnome-devel, libgnomeui-devel


author: Christopher Aillon <caillon@redhat.com> 0:1.0.1-2
changelog:
  - Add upstream fix to reduce round trips to xserver during remote control
  - Add upstream fix to call g_set_application_name


author: Christopher Aillon <caillon@redhat.com> 0:1.0.1-1
changelog:
  - Update to 1.0.1 fixing several security flaws.
  - Temporarily disable langpacks to workaround startup issues (#145806)
  - Request the correct system colors from gtk (#143423)


author: Christopher Aillon <caillon@redhat.com> 0:1.0-7
changelog:
  - Make sure we get a URL passed in to firefox (#138861)
  - Mark some generated files as ghost (#136015)


author: Christopher Aillon <caillon@redhat.com> 0:1.0-6
changelog:
  - Don't have downloads "disappear" when downloading to desktop (#139015)
  - Add RPM version to the useragent
  - BuildRequires pango-devel


author: Christopher Aillon <caillon@redhat.com> 0:1.0-5
changelog:
  - Fix spacing in textareas when using pango for rendering
  - Enable pango rendering by default.
  - Enable smooth scrolling by default


author: Christopher Aillon <caillon@redhat.com> 0:1.0-4
changelog:
  - Add StartupWMClass patch from Damian Christey (#135830)
  - Use system colors by default (#137810)
  - Re-add s390(x)


author: Christopher Aillon <caillon@redhat.com> 0:0.10.1-1.0PR1.20
changelog:
  - More file chooser fixes:
      Pop up a confirmation dialog before overwriting files (#134648)
      Allow saving as complete once again
  - Fix for upstream 263263.


author: Christopher Blizzard <blizzard@redhat.com> 0:0.10.1-1.0PR1.15
changelog:
  - Fix problem where default apps aren't showing up in the download
    dialog (#136261)
  - Fix default height being larger than the available area, cherry picked
    from upstream


author: Christopher Aillon <caillon@redhat.com> 0:0.10.1-1.0PR1.12
changelog:
  - Disable the default application checks. (#133713)
  - Disable the software update feature. (#136017)


author: Christopher Aillon <caillon@redhat.com> 0:0.10.1-1.0PR1.9
changelog:
  - Fix compile issues (#134914)
  - Add patch to fix button focus issues (#133507)
  - Add patches to fix tab focus stealing issue (b.m.o #124750)


author: Christopher Aillon <caillon@redhat.com> 0:0.10.0-1.0PR1.2
changelog:
  - Change the vendor to mozilla not fedora
  - Build with --disable-strip so debuginfo packages work (#133738)
  - Add pkgconfig patch (bmo #261090)


author: Christopher Aillon <caillon@redhat.com> 0:0.10.0-1.0PR1.1
changelog:
  - Add a BR for desktop-file-utils
  - Update default configuration options to use the firefox mozconfig (#132916)
  - Use Red Hat bookmarks (#133262)
  - Update default homepage (#132721)
  - Fix JS math on AMD64 (#133226)
  - Build with MOZILLA_OFICIAL (#132917)


author: Christopher Aillon <caillon@redhat.com> 0:0.10.0-1.0PR1.0
changelog:
  - Update to 1.0PR1
  - Update man page references to say Firefox instead of Firebird
  - Remove gcc34 and extensions patch; they are now upstream
  - Update desktop database
  - Minor tweaks to the .desktop file


author: Christopher Aillon <caillon@redhat.com> 0:0.9.3-8
changelog:
  - Fixup .desktop entry Name, GenericName, and Comment (#131602)
  - Add MimeType desktop entry (patch from jrb@redhat.com)
  - Build with --disable-xprint


author: Adrian Reber <adrian@lisas.de> 0:0.9.3-0.fdr.5
changelog:
  - remove ldconfig from scriptlets (bug #1846 comment #40)
  - reenabled mng support (bug #1971)
  - removed --enable-strip to let rpm to the stripping (bug #1971)
  - honor system settings in firefox.sh (bug #1971)
  - setting umask 022 in scriptlets (bug #1962)


author: Adrian Reber <adrian@lisas.de> 0:0.9.3-0.fdr.1
changelog:
  - updated to 0.9.3
  - removed following from .mozconfig:
      ac_add_options --with-system-mng
      ac_add_options --enable-xprint
      ac_add_options --disable-dtd-debug
      ac_add_options --disable-freetype2
      ac_add_options --enable-strip-libs
      ac_add_options --enable-reorder
      ac_add_options --enable-mathml
      ac_add_options --without-system-nspr


author: Adrian Reber <adrian@lisas.de> 0:0.9.2-0.fdr.5
changelog:
  - applied parts of the patch from Matthias Saou (bug #1846)
  - delete empty directories in %{ffdir}/chrome
  - more cosmetic changes to the spec file


author: Adrian Reber <adrian@lisas.de> 0:0.9-0.fdr.4
changelog:
  - remove extensions patch
  - add post hack to create extensions
  - enable negotiateauth extension
  - copy icon to browser/app/default.xpm
  - --enable-official-branding


author: Gene Czarcinski <gene@czarc.net>
changelog:
  - more x86_64 fixes
  - fix firefix-xremote-client for x86_64 (similar to what is done for
    firefox.sh.in)


author: Warren Togami <wtogami@redhat.com> 0:0.8-0.fdr.9
changelog:
  - xremote patch for thunderbird integration #1113
  - back out ugly hack from /usr/bin/firefox
  - correct default bookmarks


author: Adrian Reber <adrian@lisas.de> - 0:0.7-0.fdr.2
changelog:
  - s/0.6.1/0.7/
  - changed user-app-dir back to .phoenix as .mozilla-firebird
    is not working as expected
  - manpage now also available as MozillaFirebird.1


author: Adrian Reber <adrian@lisas.de> - 0:0.7-0.fdr.1
changelog:
  - updated to 0.7
  - provides webclient
  - run regxpcom and regchrome after installation and removal
  - added a man page from the debian package
  - changed user-app-dir from .phoenix to .mozilla-firebird


author: Adrian Reber <adrian@lisas.de> - 0:0.6.1-0.fdr.1
changelog:
  - updated to 0.6.1
  - changed buildrequires for XFree86-devel from 0:4.3.0 to 0:4.2.1 
    it should now also build on RH80


author: Adrian Reber <adrian@lisas.de> - 0:0.6-0.fdr.4.rh90
changelog:
  - renamed it again back to MozillaFirbird
  - added libmng-devel to BuildRequires
  - startup homepage is now www.fedora.us
  - improved the startup script to use the unix remote protocol 
    to open a new window


author: Adrian Reber <adrian@lisas.de> - 0:0.6-0.fdr.3.rh90
changelog:
  - new icon from http://iconpacks.mozdev.org/phoenix/iconshots/flame48true.png
  - now using gtk2 as toolkit
  - renamed again back to mozilla-firebird (I like it better)
  - Provides: MozillaFirebird for compatibility with previous releases
  - changed default bookmarks.html to contain links to www.fedora.us


author: Adrian Reber <adrian@lisas.de> - 0:0.6-0.fdr.2.rh90
changelog:
  - renamed package to MozillaFirebird and all files with the old name
  - enabled mng, mathml, xinerama support
  - now honouring RPM_OPT_FLAGS


author: Phillip Compton <pcompton[AT]proteinmedia.com> - 0:0.6-0.fdr.0.3.cvs20030402.rh90
changelog:
  - Changed Prereq to Requires.
  - Changed BuildRequires to gtk+-devel (instead of file).
  - Recompressed source with bzip2.
  - Removed post.


author: Phillip Compton <pcompton[AT]proteinmedia.com> - 0:0.6-0.fdr.0.2.cvs20030402.rh90
changelog:
  - Added desktop-file-utils to BuildRequires.
  - Changed category to X-Fedora-Extra.
  - Updated to CVS.


author: Phillip Compton <pcompton[AT]proteinmedia.com> - 0.6-0.fdr.0.1.cvs20030326.rh90
changelog:
  - Updated to latest CVS.
  - Changed release to 9 vs 8.1.
  - Added cvs script.
  - added encoding to desktop file.


author: Phillip Compton <pcompton[AT]proteinmedia.com> - 0.6-0.fdr.0.1.cvs20030323.rh81
changelog:
  - Updated to latest CVS.
  - added release specification XFree86-devel Build Requirement.
  - changed chmod to %attr


author: Ville Skyttä <ville.skytta at iki.fi> - 0.16.3-6
changelog:
  - Don't run depmod during build even if System.map is available.
  - Run "make install" in verbose mode.
  - Build for kernel 2.6.23.1-42.fc8.


author: Ville Skyttä <ville.skytta at iki.fi> - 0.16.3-5
changelog:
  - 0.16.3, build for kernel 2.6.23-0.124.rc3.git2.fc8.
  - Fix build with recent 2.6.23 rc kernels.
  - Use ExcludeArch instead of ExclusiveArch.
  - License: GPLv2+


author: Ville Skyttä <ville.skytta at iki.fi> - 0.16.3-0.1.rc1
changelog:
  - 0.16.3-rc1, build for kernel 2.6.22-8.fc8.
  - Bring up to date with current Rawhide kernel archs and variants.


author: Ville Skyttä <ville.skytta at iki.fi> - 0.16.1-7
changelog:
  - Drop OSS default patch, making ALSA the default now; users who need
    OSS should use the audio_driver=oss option of the em8300 module.
  - Use upstream 2.6.21/ALSA patch.
  - Build for kernel 2.6.20-1.2997.fc7, including ppc64.


author: Ville Skyttä <ville.skytta at iki.fi> - 0.16.1-0.5.rc2
changelog:
  - 0.16.1-rc2 + patch for post-2.6.20 ALSA changes.
  - Update kmodtool to 0.10.12.
  - Build for kernel 2.6.20-1.2942.fc7.


author: Ville Skyttä <ville.skytta at iki.fi> - 0.16.0-0.1.rc1
changelog:
  - 0.16.0-rc1, kernel 2.6.17 patch applied upstream.
  - Patch to default to OSS for backwards compatibility.
  - Adjust to FC6 kernel variants, build for 2.6.17-1.2647.fc6.
  - Update kmodtool to 0.10.11.
  - Drop early FC5 hacks.


author: Ville Skyttä <ville.skytta at iki.fi> - 0.15.3-6
changelog:
  - Enable PPC SMP builds (#189400).
  - Use firmwareless tarball (#189400).
  - Untabify specfile (#189400).


author: Ville Skyttä <ville.skytta at iki.fi> - 0.15.3-3
changelog:
  - Require version >= of em8300-kmod-common.
  - Provide em8300-kmod instead of kmod-em8300 to fix upgrade woes (#970).


author: Ville Skyttä <ville.skytta at iki.fi> - 0.15.2-6.cvs20060325
changelog:
  - CVS snapshot from today, I2C patches no longer needed, should fix #839.
  - Allow passing --define kversion and --define kvariants to the build again.
  - Update kmodtool to 0.10.6.


author: Ville Skyttä <ville.skytta at iki.fi> - 0.15.2-0.lvn.4
changelog:
  - Adapt to FE kernel module packaging conventions.
  - Add upstream patch to fix build with 2.6.16-rc1+ kernels.


author: <than@redhat.com> 2.1.5-1
changelog:
  - 2.1.5 release
  - update c_cpp_reference
  - cleanup sepcfile
  - remove templates, which is now in new upstream
  - remove unneeded c_cpp_reference-2.0.1-config.patch
  - add missing mo files
  - fixed #75084, #73128, #70656, #77767, #74425


author: Than Ngo <than@redhat.com> 2.1.3-3
changelog:
  - Add fix to show/hide KaboutKDE and Report Bug menu item over
    KDE Action Restrictions in kdeglobals


author: Than Ngo <than@redhat.com> 2.1beta2-2
changelog:
  - fixed Strange characters appear in the output window (bug #59217)
  - fixed return-line feed sign in Kdevelop setup tool (bug #55032)


author: Than Ngo <than@redhat.com> 2.1beta1-1
changelog:
  - update to 2.1 beta1
  - fix build against gcc 3
  - fix some typo bugs
  - get rid of libkfile
  - update c_cpp_reference to 2.0.1


author: Than Ngo <than@redhat.com> 2.0-2
changelog:
  - fix a bug in creating documentation index when running KDevelop Setup (bug #52760)
  - backport some major bugfixes from 2.0.1


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update the C/C++ reference guide docs. The older version had a
    couple of examples that won't work with gcc 2.96-*


author: Than Ngo <than@redhat.com>
changelog:
  - update (only bugfixes)
  - fix up kdelibs documentation path
  - fix a dependency problem with kde-i18n package (Bug #27675)
  - add qt-designer into requires


author: Than Ngo <than@redhat.com>
changelog:
  - build snapshot 20001112, it works now with KDE2 and kde1-compat
  - fix libtool to build on sparc and alpha
  - don't use make -j


author: Than Ngo <than@redhat.de>
changelog:
  - add missing ldconfig in %post and %postun section (Bug #14924)
  - add missing C references stuff to kdevelop


author: Bernhard Rosenkränzer <bero@redhat.com>
changelog:
  - Fix up documentation path (Bug #7291)
  - Update to current stable branch - this should fix up the debugger problem
  - clean up spec file


author: Dave Jones <davej@redhat.com>
changelog:
  - Disable PCI MMCONFIG by default. (Boot with pci=msi if you need it)
    Works around bz 329241 amongst others.


author: Dave Jones <davej@redhat.com>
changelog:
  - Revert: x86_64: allocate sparsemem memmap above 4G (fixes bz #249174)
    (Much thanks to Martin Ebourne for tracking this down).


author: Chuck Ebbert <cebbert@redhat.com>
changelog:
  - ALSA 1.0.15
  - Fix ppc64 DSO unwinder bug (#350291).
  - Fix linker script bug preventing Fedora bringup on IA64.
  - Kill not-always-relevant debug message in ath5k driver.


author: John W. Linville <linville@redhat.com>
changelog:
  - iwl4965-base.c: fix off-by-one errors
  - ipw2100: send WEXT scan events
  - rt2x00: Add new rt73usb USB ID
  - zd1211rw, fix oops when ejecting install media
  - rt2x00: Fix residual check in PLCP calculations.
  - rtl8187: Fix more frag bit checking, rts duration calc
  - iwlwifi: set correct base rate for A band in rs_dbgfs_set_mcs
  - iwlwifi: Fix rate setting in probe request for HW scan


author: John W. Linville <linville@redhat.com>
changelog:
  - iee80211: fix an endian bug
  - mac80211: change BSSID list key to (BSSID, SSID, frequency) tuple
  - mac80211: make honor IW_SCAN_THIS_ESSID
  - mac80211: don't fail IE parse if junk at end of frame


author: Eric Paris <eparis@redhat.com>
changelog:
  - SELinux: performance: do not revalite perms on read/write
  - SELinux: performance: use ebitmaps to speed up AVC misses
  - SELinux: performance: fix warnings in ebitmaps to speed up AVC misses


author: Chuck Ebbert <cebbert@redhat.com>
changelog:
  - Don't use incremental patches for -stable updates.
  - Add USB modem fix from Fedora 7 kernel to Fedora 8.


author: Chuck Ebbert <cebbert@redhat.com>
changelog:
  - Linux 2.6.23-rc8-git2
  - Re-add AMD timer fix removed from upstream
  - Fix hotplug CPU (broken by AMD timer patch)


author: Dave Airlie <airlied@redhat.com>
changelog:
  - drm-mm-git.patch - pull in DRM git queue
  - nouveau-drm.patch - update nouveau patch on top of drm git queue


author: Eric Sandeen <sandeen@redhat.com>
changelog:
  - ext3 bugfixes: fix potential corruption in do_split dx leaf split (#28650),
    handle dx directory corruption gracefully, w/o BUG (#236464).
  - xfs bugfixes: setfattr/getfattr/getversion 32-bit compat fixes (#291981),
    log replay vs. filesize update fixes from sgi.


author: Chuck Ebbert <cebbert@redhat.com>
changelog:
  - x86 setup: limit number of EDD devices scanned
  - x86 setup: print number of EDD device during scan
  - libata: change boot option name to "libata.dma"
    (still only affects PATA drives)


author: Dave Jones <davej@redhat.com>
changelog:
  - Fix booting on Dell I5150.
    Apparently some VESA BIOS implementations clobber registers when called.


author: John W. Linville <linville@redhat.com>
changelog:
  - Update wireless-dev bits (mac80211, rt2x00, b43, ssb)
  - Add b43legacy driver
  - Add ath5k driver
  - Add at76_usb driver


author: John W. Linville <linville@redhat.com>
changelog:
  - Update wireless-dev bits (upstream fixes, b43, ssb)
  - mac80211: rate limit WEP bad keyidx message
  - ssb: fix auto-load


author: Roland McGrath <roland@redhat.com>
changelog:
  - Rearrange module signing to avoid conflicts with debugedit build-id changes.
  - debugedit embedded objects before stripping to avoid later build-id change.
  - Use -g for C files in x86_64 vDSO.


author: Roland McGrath <roland@redhat.com>
changelog:
  - disable new e1000e driver for powerpc, still broken
  - support rpmbuild --without modsign for manual test builds
  - fix powerpc vdso install patch
  - fix i386 vdso install patch
  - fix ppc64 build breakage from "enable -g for assembly"
  - disable ppc64 vdso install pending eu-strip bug
  - clean up spec file sh scripting
  - spec fix for kdump kernel


author: Roland McGrath <roland@redhat.com>
changelog:
  - macroized spec file, use new find-debuginfo.sh features
  - update build-id related patches: core dump support,
    /sys/module/name/notes, installed vdso binaries
  - temporarily disable e1000e %ifarch ppc ppc64 to work around build problems


author: John W. Linville <linville@redhat.com>
changelog:
  - Update git-wireless-dev.patch (bcm43xx-mac80211 & zd1211rw-mac80211 updates)
  - mac80211: Filter locally-originated multicast frames echoed by AP (2nd try)
  - mac80211: probe for hidden SSIDs when scanning for association


author: John W. Linville <linville@redhat.com>
changelog:
  - Update git-wireless-dev.patch (iwlwifi & rt2x00 updates)
  - mac80211: Filter locally-originated multicast frames echoed by AP


author: David Woodhouse <dwmw2@infradead.org>
changelog:
  - Fix bcm43xx transmission problems for mac80211 driver too
  - Fix softmac deadlock
  - Fix bcm43xx regression
  - Restore PowerMac suspend via /sys/power/state
  - PS3 fixes
  - Restore ibmvscsi support on iSeries
  - Re-enable CONFIG_IDE_PROC_FS to fix ybin


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Switch from using kernel-*.config files to using config-*
    files and dynamically building kernel-*.config files


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - Add minimal patch from markmc for ICH9 support in e1000 while the new
    driver works itself out upstream


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - New kernel versioning scheme, intended to more closely
    match with that of the upstream Linus kernel
  - Add --with/without debuginfo flag
  - Redundancy reduction wrt kernel-debug flags
  - Make one-off kernel-vanilla build correctly again


author: Roland McGrath <roland@redhat.com>
changelog:
  - Let spec-file ApplyPatch function pass extra args to patch.
  - Re-enable utrace patch with -F2, needed after nearby CFS change.
  - utrace update (06c303cccb93e7ca3a95923e69b4d82733c1cf00)


author: Roland McGrath <roland@redhat.com>
changelog:
  - Add spec hacks to enable building alternate vanilla and git-based rpms.
  - Enable sparse checking in build for F7 and later.


author: Dave Jones <davej@redhat.com>
changelog:
  - Build with -Wpointer-arith for a while.
    See http://bugzilla.kernel.org/show_bug.cgi?id=7561 for info.


author: Paul Howarth <paul@city-fan.org> 1:0.17-20
changelog:
  - clarify license as LGPL version 2 or later
  - remove bundled libintl (GPL) in %prep to be absolutely sure that it isn't
    used
  - patch libglade-config to generate cflags/libs values at runtime instead of
    build-time and hence be multiarch compatible (#342131); we can get away with
    this because the entire (legacy) library stack is stable and isn't going to
    change in any significant way
  - enumerate more of the %files list to narrow scope of wildcards
  - re-encode ChangeLog as UTF-8
  - preserve timestamps for files copied from source to installed package


author: Paul Howarth <paul@city-fan.org> 1:0.17-19
changelog:
  - add new buildreq libtool and use the system libtool instead of the bundled
    one to avoid /usr/lib64 rpaths
  - add patch to fix non-weak-symbols issues in libglade-gnome.so
  - include epoch in versioned gnome-libs-devel dependencies


author: Paul Howarth <paul@city-fan.org> 1:0.17-17
changelog:
  - update URL
  - add %{?dist} tag
  - remove explicit runtime library deps (rpm will generate what's needed)
  - use Fedora Extras standard buildroot
  - wrap description text at 80 columns
  - add pkgconfig as dep of devel package
  - use "make DESTDIR=%{buildroot} install" instead of deprecated %makeinstall
  - add buildreqs autoconf, gettext, gtk-doc
  - disable static libraries
  - minor cosmetic spec file tweaks


author: Havoc Pennington <hp@redhat.com>
changelog:
  - rebuild in new environment
  - install .pc files, #59522
  - fix more prefix/lib->libdir sort of things
  - use autoconf-2.52 binary


author: Havoc Pennington <hp@redhat.com>
changelog:
  - rebuild for db1 stuff
  - fix some prefix/lib -> libdir sort of things
  - use configure/makeinstall macros
  - disable gtk-doc so we don't need an X display


author: Miloslav Trmač <mitr@redhat.com> - 0.56.6-1
changelog:
  - Set SELinux file contexts when creating home directories, preserve them when
    moving home directories
    Resolves: #351201


author: Miloslav Trmač <mitr@redhat.com> - 0.56.5-1
changelog:
  - Work around spurious error messages when run against the Fedora Directory
    server
  - Fix error reporting when creating home directories and creating/removing mail
    spool files
    Resolves: #318121


author: Miloslav Trmač <mitr@redhat.com> - 0.56.4-2
changelog:
  - Split the Python module to a separate subpackage (original patch by Yanko
    Kaneti)
  - Update the License: tag


author: Miloslav Trmac <mitr@redhat.com> - 0.56.1-1
changelog:
  - When changing passwords, only silently ignore know shadow markers, not all
    invalid hashes
    Resolves: #225495


author: Miloslav Trmac <mitr@redhat.com> - 0.56-1
changelog:
  - Tighten the API and implementation to avoid corrupting number-like strings;
    the module interface ABI has changed
    Resolves: #226976


author: Miloslav Trmac <mitr@redhat.com> - 0.54.6-1
changelog:
  - Fix bugs in handling of invalid lines in the files and shadow modules
  - Fix pattern matching in lu_*_enumerate_full in the files and shadow modules
  - Add more error reporting, return non-zero exit status on error from utils
  - Use the skeleton directory specified in libuser.conf by Python
    admin.createHome and admin.addUser, add parameter skeleton= to admin.addUser
    (#189984)


author: Miloslav Trmac <mitr@redhat.com> - 0.54.1-1
changelog:
  - Support importing of configuration from shadow-utils (/etc/login.defs and
    /etc/default/useradd)
  - Add libuser.conf(5) man page


author: Miloslav Trmac <mitr@redhat.com> - 0.54-1
changelog:
  - Make sure attributes with no values can never appear
  - Fix crash in the "files" module when an attribute is missing
  - Use hidden visibility for internal functions, remove them from
    libuser/user_private.h; this changes module interface ABI


author: Miloslav Trmac <mitr@redhat.com> - 0.53.8-1
changelog:
  - Permit "portable" user and group names as defined by SUSv3, plus trailing $
    (#159452)
  - Don't build static libraries


author: Miloslav Trmac <mitr@redhat.com> - 0.53.5-1
changelog:
  - Ignore nss_compat lines in the "files" module (#154651)
  - Autodetect Python version (#154096)
  - Add BuildRequires: libselinux-devel, s/BuildPrereq/BuildRequires/


author: Miloslav Trmac <mitr@redhat.com> - 0.53.3-2
changelog:
  - Add Requires: glib2-devel to libuser-devel (#152501)
  - Run ldconfig using %post{,un} -p to let RPM play tricks


author: Miloslav Trmac <mitr@redhat.com> - 0.53.3-1
changelog:
  - Don't silently ignore some I/O errors
  - Don't include a Cyrus SASL v1 header file when libldap links to v2 (#150046)
  - Rebuild with gcc 4


author: Miloslav Trmac <mitr@redhat.com> - 0.53.2-1
changelog:
  - Important bug fixes in lchage, lgroupmod, lnewusers and lusermod
  - Minor bug fixes in lpasswd and luseradd
  - Add man pages for the utilities (#61673)


author: Miloslav Trmac <mitr@redhat.com> - 0.53-1
changelog:
  - Support UID and GID values larger than LONG_MAX (#124967)
  - Fix updating of groups after user renaming in lusermod
  - Allow setting a shadow password even if the current shadow password is
    invalid (#131180)
  - Add lu_{user,group}_unlock_nonempty (#86414); module interface ABI has 
    changed
  - Miscellaneous bug and memory leak fixes


author: Miloslav Trmac <mitr@redhat.com> - 0.52.6-1
changelog:
  - Make error reporting more consistent, more verbose and always on stderr
    (partly #133861, original patch by Pawel Salek)
  - Mark strings previously blocked by string freeze for translation


author: Miloslav Trmac <mitr@redhat.com> - 0.52.5-1
changelog:
  - Fix home directory renaming in ADMIN.modifyUser (#135280)
  - Further Python reference counting fixes


author: Miloslav Trmac <mitr@redhat.com> - 0.52.2-1
changelog:
  - Allow LDAP connection using ldaps, custom ports or without TLS (original
    patch from Pawel Salek).


author: Miloslav Trmac <mitr@redhat.com> - 0.51.12-1
changelog:
  - Don't claim success and exception at the same time (#133479)
  - LDAP fixes, second round
  - Various other bugfixes


author: Miloslav Trmac <mitr@redhat.com> - 0.51.11-1
changelog:
  - Allow documented optional arguments in Python
    ADMIN.{addUser,modifyUser,deleteUser} (#119812)
  - Add man pages for lchfn and lchsh
  - LDAP fixes, first round
  - Avoid file conflict on multilib systems
  - Call ldconfig correctly


author: Miloslav Trmac <mitr@redhat.com> - 0.51.10-1
changelog:
  - Don't attempt to lookup using original entity name after entity
    modification (rename in particular) (#78376, #121252)
  - Fix copying of symlinks from /etc/skel (#87572, original patch from gLaNDix)
  - Make --enable-quota work, and fix the quota code to at least compile (#89114)
  - Fix several bugs (#120168, original patch from Steve Grubb)
  - Don't hardcode python version in spec file (#130952, from Robert Scheck)
  - Properly integrate the SELinux patch, it should actually be used now, even
    though it was "enabled" since 0.51.7-6


author: Miloslav Trmac <mitr@redhat.com> - 0.51.8-1
changelog:
  - Update to build with latest autotools and gtk-doc
  - Update ALL_LINGUAS and POTFILES.in
  - Rebuild to depend on newer openldap


author: Nalin Dahyabhai <nalin@redhat.com> 0.51.7-1
changelog:
  - ldap: set error codes correctly when we encounter failures initializing
  - don't double-close modules which fail initialization
  - ldap: don't set an error in cases where one is already set


author: Nalin Dahyabhai <nalin@redhat.com> 0.51.6-1
changelog:
  - use a crypt salt consistent with the defaults/crypt_style setting when
    setting new passwords (#79337)


author: Nalin Dahyabhai <nalin@redhat.com> 0.51.5-1
changelog:
  - expose lu_get_first_unused_id() as a package-private function
  - provide libuser.ADMIN.getFirstUnusedUid and libuser.ADMIN.getFirstUnusedGid
    in python


author: Nalin Dahyabhai <nalin@redhat.com> 0.51-1
changelog:
  - files: ignore blank lines in files
  - libuser: disallow creation of accounts with names containing whitespace,
    control characters, or non-ASCII characters


author: Nalin Dahyabhai <nalin@redhat.com> 0.49.101-1
changelog:
  - fix python bindings of enumerateFull functions
  - adjust prompter wrapping to not error out on successful returns


author: Nalin Dahyabhai <nalin@redhat.com> 0.49.100-1
changelog:
  - be more careful about printing error messages
  - fix refreshing after adding of accounts
  - ldap: try to use a search to convert names to DNs, and only fall back to
    guessing if it turns up nothing
  - files: fix an off-by-one in removal of entries


author: Nalin Dahyabhai <nalin@redhat.com> 0.49.98-1
changelog:
  - automatically refresh entities after add, modify, setpass, removepass,
    lock, and unlock operations
  - remove debug spewage when creating and removing mail spools
  - files: fix saving of multi-valued attributes
  - rename MEMBERUID attribute for groups to MEMBERNAME


author: Nalin Dahyabhai <nalin@redhat.com> 0.49.97-1
changelog:
  - files: fix bug in removals
  - ldap: revert attempts at being smart at startup time, because it makes UIs
    very messy (up the three whole dialogs just to start the ldap stuff!)


author: Nalin Dahyabhai <nalin@redhat.com> 0.49.93-1
changelog:
  - move shadow initialization for groups to the proper callback
  - rework locking in the files module to not require that files be writable


author: Nalin Dahyabhai <nalin@redhat.com> 0.49.91-1
changelog:
  - ldap: finish port to new API
  - sasl: finish port to new API (needs test)
  - libuser: don't commit object changes before passing data to service
    functions which might need differing data sets to figure out what to
    change (for example, ldap)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - renamed the python module
  - revamped internals to use gobject's gvalues and gvaluearrays instead of
    glists of cached strings
  - add enumeration-with-data functions to the C library


author: Nalin Dahyabhai <nalin@redhat.com> 0.32-1
changelog:
  - link the python module against libpam
  - attempt to import the python modules at build-time to verify dependencies


author: Nalin Dahyabhai <nalin@redhat.com> 0.30-1
changelog:
  - quotaq: fix argument order when reading quota information
  - user_quota: set quota grace periods correctly
  - luseradd: never create home directories for system accounts


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - HUP nscd on modifications
  - userutil.c: mmap files we're reading for probable speed gain
  - userutil.c: be conservative with the amount of random data we read
  - docs fixes


author: Nalin Dahyabhai <nalin@redhat.com> 0.28-1
changelog:
  - apps: print usage on errors
  - lnewusers.c: initialize groups as groups, not users
  - lnewusers.c: set passwords for new accounts
  - luseradd.c: accept group names in addition to IDs for the -g flag
  - luseradd.c: allow the primary GID to be a preexisting group


author: Nalin Dahyabhai <nalin@redhat.com> 0.27-1
changelog:
  - add ko translation files
  - files.c: fix a heap corruption bug in lock/unlock (#51750)
  - files.c: close a memory leak in reading of files


author: Nalin Dahyabhai <nalin@redhat.com> 0.26-1
changelog:
  - lusermod: change user name in groups the user is a member of during renames
  - lgroupmod: change primary GID for users who are in the group during renumbers
  - ldap.c: handle new attributes more gracefully if possible
  - add ru translation files


author: Nalin Dahyabhai <nalin@redhat.com> 0.25.1-1
changelog:
  - rename the quota source files to match the library, which clears up a
    file conflict with older quota packages
  - add ja translation files


author: Nalin Dahyabhai <nalin@redhat.com> 0.25-1
changelog:
  - close up some memory leaks
  - add the ability to include resident versions of modules in the library


author: Nalin Dahyabhai <nalin@redhat.com> 0.24-3
changelog:
  - stop leaking descriptors in the files module
  - speed up user creation by reordering some checks for IDs being in use
  - update the shadowLastChanged attribute when we set a password
  - adjust usage of getXXXXX_r where needed
  - fix assorted bugs in python binding which break prompting


author: Nalin Dahyabhai <nalin@redhat.com> 0.23-1
changelog:
  - install sv translation
  - make lpasswd prompt for passwords when none are given on the command line
  - make sure all user-visible strings are marked for translation
  - clean up some user-visible strings
  - require PAM authentication in lchsh, lchfn, and lpasswd for non-networked modules


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - print uids and gids of users and names in lid app
  - fix tree traversal in users_enumerate_by_group and groups_enumerate_by_users
  - implement enumerate_by_group and enumerate_by_user in ldap module
  - fix id-based lookups in the ldap module
  - implement islocked() method in ldap module
  - implement setpass() method in ldap module
  - add lchfn and lchsh apps
  - add %d substitution to libuser.conf


author: Nalin Dahyabhai <nalin@redhat.com> 0.21-1
changelog:
  - finish adding a sasldb module which manipulates a sasldb file
  - add users_enumerate_by_group and groups_enumerate_by_users


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - luserdel: remove the user's primary group if it has the same name as
    the user and has no members configured (-G disables)
  - fixup some configure stuff to make libuser.conf get generated correctly
    even when execprefix isn't specified


author: Nalin Dahyabhai <nalin@redhat.com> 0.20-1
changelog:
  - only call the auth module when setting passwords (oops)
  - use GTrees instead of GHashTables for most internal tables
  - files: complain properly about unset attributes
  - files: group passwords are single-valued, not multiple-valued
  - add lpasswd app, make sure all apps start up popt with the right names


author: Nalin Dahyabhai <nalin@redhat.com> 0.18-1
changelog:
  - actually make the new optional arguments optional
  - fix lu_error_new() to actually report errors right
  - fix part of the python bindings
  - include tools in the binary package again
  - fixup modules so that password-changing works right again
  - add a "key" field to prompt structures for use by apps which like to
    cache these things
  - add an optional "mvhomedir" argument to userModify (python)


author: Nalin Dahyabhai <nalin@redhat.com> 0.16.1-1
changelog:
  - finish home directory population
  - implement home directory moving
  - change entity get semantics in the python bindings to allow default values for .get()
  - add lu_ent_has(), and a python has_key() method to Entity types
  - don't include tools in the binary package
  - add translated strings


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - lib/user.c: catch and ignore errors when running stacks
  - lusermod: fix slightly bogus help messages
  - luseradd: when adding a user and group, use the gid of the group
    instead of the user's uid as the primary group
  - properly set the password field in user accounts created using
    auth-only auth modules (shadow needs "x" instead of "!!")
  - implement home directory removal, start on population


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix group password setting in the files module
  - setpass affects both auth and info, so run both stacks


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix errors due to uninitialized fields in the python bindings
  - add kwargs support to all python wrappers
  - add a mechanism for passing arguments to python callbacks


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - don't bail when writing empty fields to colon-delimited files
  - use permissions of the original file when making backup files instead of 0600


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - finish implementing is_locked methods in files/shadow module
  - finish cleanup of the python bindings
  - allow conditional builds of modules so that we can build without
    all of the prereqs for all of the modules


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - clean up quota bindings some more
  - finish most of the ldap bindings
  - fix a subtle bug in the files module that would show up when renaming accounts
  - fix mapping methods for entity structures in python


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - get bindings for prompts to work correctly
  - clean up some of the add/remove semantics (set source on add)
  - ldap: implement enumeration
  - samples/enum: fix the argument order


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add functions for enumerating users and groups, optionally per-module
  - lusermod.c: -s should specify the shell, not the home directory


author: Nalin Dahyabhai <nalin@redhat.com> 0.8
changelog:
  - add a "quiet" prompter
  - add --interactive flag to sample apps and default to using quiet prompter
  - ldap: attempt a "self" bind if other attempts fail
  - krb5: connect to the password-changing service if the user principal has
    the NULL instance


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - the great adding-of-the-copyright-statements
  - take more care when creating backup files in the files module


author: Nalin Dahyabhai <nalin@redhat.com> 0.7
changelog:
  - add openldap-devel as a buildprereq
  - krb5: use a continuous connection
  - krb5: add "realm" config directive
  - ldap: use a continuous connection
  - ldap: add "server", "basedn", "binddn", "user", "authuser" config directives
  - ldap: actually finish the account deletion function
  - ldap: don't send cleartext passwords to the directory
  - fix naming attribute for users (should be uid, not gid)
  - refine the search-by-id,convert-to-name,search-by-name logic
  - fix handling of defaults when the config file is read in but contains no value
  - implement an LDAP information store
  - try to clean up module naming with libtool
  - luseradd: pass plaintext passwords along
  - luseradd: use symbolic attribute names instead of hard-coded
  - lusermod: pass plaintext passwords along
  - lgroupadd: pass plaintext passwords along
  - lgroupmod: pass plaintext passwords along
  - add libuser as a dependency of libuser-devel


author: Dan Walsh <dwalsh@redhat.com> 0.1.4-1
changelog:
  - Add patch from sgrubb
  - 	Fix 64 bit size problems
  - 	Increase the open file limit
  -	Make sure maximum size is not exceeded


author: Peter Jones <pjones@redhat.com> - 6.0.17-1
changelog:
  - Fix missing quotes causing failure to detect erroneous "--with" command line
    arguments (#249163)
  - Use open64 in losetup so large files work (#220687)
  - Fix sysfs paths for fw-sbp2 (#231708)
  - Handle spaces in kernel command line better (#240785)
  - Fix handling of --omit-lvm-modules and --omit-dmraid


author: Peter Jones <pjones@redhat.com> - 6.0.10-1
changelog:
  - Fix nosegneg library discovery in get_dso_deps() (#244730)
  - Only do ld.so discovery once in get_dso_deps()
  - Optionally use dhcp to discover nfsroot target (#248575)


author: Peter Jones <pjones@redhat.com> - 6.0.9-1
changelog:
  - Use scsi_wait_scan.ko with scsi storage modules (#220470)
  - Fix handling of config files with no 'default' line in grubby


author: Peter Jones <pjones@redhat.com> - 6.0.7-1
changelog:
  - Fix UUID handling on resume devices.
  - Don't require that a driver be modular when looking up its name in sysfs.
  - Make removable devices conditionally considered when scanning labels.
  - Fix handling of dm devices without device tables.


author: Peter Jones <pjones@redhat.com> - 6.0-1
changelog:
  - Merge in close() fix in bdevid probe code from rhel5 branch
  - Try to load raid456 module as well as individual level-based modules
  - more sophisticated modalias probing, so we get new storage drivers better
    (patch from notting)
  - Handle dynamic executables and libraries
  - Don't clobber the kernel command line when handling resume (#215084).
  - Fix test for "withusb" (#215314).
  - Link dynamically


author: Peter Jones <pjones@redhat.com>
changelog:
  - Don't reference "netdev" in addnetdev()
  - Only use one IP address for "remoteip" in handlenfs()
  - Abort much earlier if not invoked as UID 0


author: Peter Jones <pjones@redhat.com> - 5.1.19-1
changelog:
  - Fix booting on non-LVM devices where sysfs uses a '!' in the device path,
    such as cciss.  (#201875, #196360)


author: Peter Jones <pjones@redhat.com> - 5.1.16-1
changelog:
  - Don't require non-tmpfs tmpdir unless we're using loopback
  - Fix symlink chasing for yaboot.conf in grubby (#207302)


author: Peter Jones <pjones@redhat.com> - 5.1.11-1
changelog:
  - Pull in bdevid properly (not two sources any more)
  - Lots of minor bugfixes, leak fixups, etc.
  - Updates for new iScsi userland (katzj)
  - ata and usb device id probes in bdevid
  - preliminary work for boot-time device identification.
  - Fixes for network driver selection (katzj)


author: Peter Jones <pjones@redhat.com> - 5.1.10-1
changelog:
  - Fix %setup args
  - Work around lvm locking problems when clvm is installed (#203904)
  - Work around lvm segfault by always using lvm.static
  - Fix label scanning on dm devices (based on a patch from Hans de Goede)
    (#204763)
  - handle the /proc/bus/usb mounting with a state machine in the module
    loading emission, not with a sentinal value
  - do forced finding of devices *after* auto-detection of the root fs, so
    we're not blindsided by bogus scsi_hostadapter aliases and the like.
  - move nashDm* functions to libnash so stuff in block.c can call them.


author: Peter Jones <pjones@redhat.com> - 5.1.7-1
changelog:
  - Make "stabilized" work better (patch from Alexandre Oliva)
  - Rewrite usb handling (notting and pjones)
  - Fix libbdevid provides/obsoletes.
  - Include usb hcd drivers by default


author: Bill Nottingham <notting@redhat.com> - 5.1.3-1
changelog:
  - replace various sed/grep/cut/head calls with bash & awk equivalents
  - fix a typo
  - nfs loop fixes
  - silence xen errors when sysfs layout is different


author: Peter Jones <pjones@redhat.com> - 5.1.2-1
changelog:
  - pull in new libbdevid for scsi probing fix
  - restructure package so things can include libbdevid (and its modules)
    without depending on python


author: Jeremy Katz <katzj@redhat.com> - 5.1.0-1
changelog:
  - allow rootdev/rootfs/rootopts parsing on the mkinitrd command line (notting)
  - fix case where we'd spin forever resolving a device (#199046)


author: Peter Jones <pjones@redhat.com> - 5.0.47-1
changelog:
  - add libbdevid
  - fix mode handling on open syscall wrapper (patch from Mark McLoughlin)
  - save dhcp lease file after network initialization (patch from markmc)


author: Peter Jones <pjones@redhat.com>
changelog:
  - make libnash.a and the nash-devel package
  - use libdhcp instead of pump (patch from Mark McLoughlin)


author: Jeremy Katz <katzj@redhat.com> - 5.0.46-1
changelog:
  - if we don't get a modalias for a net driver, try via 
    ethtool (notting, #196104)
  - add patches from Aron Griffis (aron AT hp DOT com) for multiboot 
    support on ia64


author: Jeremy Katz <katzj@redhat.com> - 5.0.44-1
changelog:
  - fix so we only use iscsistart if we're doing root on iscsi 
  - fix spurious shell error (noticed by karsten)


author: Jeremy Katz <katzj@redhat.com> - 5.0.43-1
changelog:
  - Add back patches from pjones which had just been in the package for 
    * fix bad shell code to detect DMs in use
    * fix "stabilized" to stat where appropriate
    * use stabilized for sbp2


author: Jeremy Katz <katzj@redhat.com> - 5.0.42-1
changelog:
  - add a hack to handle xennet devices not having a modalias (#196104)
  - initial pass at support for root on iscsi (patch from Patrick 
    Mansfield <patmans@us.ibm.com>)


author: Peter Jones <pjones@redhat.com> - 5.0.38-1
changelog:
  - handle bringing up multiple network devices (katzj)
  - make "withusb=yes" default
  - add --without-usb
  - make usb load [euo]hci_hcd correctly


author: Peter Jones <pjones@redhat.com> - 5.0.33-1
changelog:
  - fix unbalanced pushd in mkinitrd (patch from Pete Zaitcev, bz# 185822)
  - add "cond" command for simple conditionals (bz# 182938)
  - add "status" command to see/set the exit status for testing
  - add "--remove-args" and "--update" args for new-kernel-pkg (patch from
    Don Zickus, bz# 183917)


author: Peter Jones <pjones@redhat.com> - 5.0.32-1
changelog:
  - handle sd_mod on scsi_mod in findmodule, not in the scsi setup.  This
    fixes the "no scsi_hostadapter" alias problem better (#182008).


author: Peter Jones <pjones@redhat.com> - 5.0.30-1
changelog:
  - move blkid.tab* references to /etc/blkid/blkid.tab*
  - don't do the selinux context stuff on blkid.tab*, as it now inherits from
    the directory.


author: Peter Jones <pjones@redhat.com> - 5.0.29-1
changelog:
  - Fix pump-devel buildrequires
  - Fix grubby's getpathbyspec() usage (#183010)
  - Fix grubby's makefile
  - Make readlink command work with super scary huge sysfs paths (#183091)
  - Make readlink handle directories better (#166666)
  - Don't create ramdisk blockdevs, mkblkdevs does it (#181873)
  - Don't use showlabels to resolve labels, use resolveDevice so we don't
    need messy awk (#180372)


author: Peter Jones <pjones@redhat.com> - 5.0.28-1
changelog:
  - Make /dev/efirtc on ia64 boxes (#182598)
  - Handle selinux contexts on /etc/blkid.tab* since we can't do it in
    libblkid.
  - Make building from the "nash" subdir work again
  - Make getpathbyspec() allocate on the caller's stack, eliminating
    several memory leaks in callers.
  - Don't strip nash


author: Peter Jones <pjones@redhat.com> - 5.0.27-1
changelog:
  - Fix multiboot argument quoting in new-kernel-package (#182243)
  - Fix "netlink" fd error in hotplug initialization.
  - Fix directory creation in smartmknod()
  - Fix find command when it's not run alone (#181874, patch from Mark
    McLoughlin)
  - Don't use 0-length uuids
  - Update /dev/mapper nodes more often
  - Allow dm partadd not to include the /dev/mapper path
  - Use /etc/fstab, not /fstab, so if you've got /sbin/mount it'll work
  - Bring in sd_mod if libata or scsi_mod is selected (#181983)
  - use -Wl,--wrap,open and __wrap_open() instead of coeOpen()


author: Peter Jones <pjones@redhat.com> - 5.0.26-1
changelog:
  - fix detection of floppy devices, don't probe them for labels
  - fix grubby to use the same label scanning code as nash
  - senseless rewriting of makefiles so that grubby can use nash's .o's, uh,
    "more easily".


author: Peter Jones <pjones@redhat.com> - 5.0.24-1
changelog:
  - use the right nash-dm command to get the device list
  - check if a subdevice has the same partition table, not if it starts
    at the right place (fixes partition comparison on !mirror devices)


author: Peter Jones <pjones@redhat.com> - 5.0.22-1
changelog:
  - formatting cleanups
  - prefix partition number with "p" for partitions on dmraid
  - add support for disabling partitions which overlap with partitions on
    dm devices.
  - add multipath support
  - fix dm creation ordering and partition detection
  - add "network" command (katzj)
  - add nfsroot support (katzj)
  - put "showlabels" back into nash


author: Peter Jones <pjones@redhat.com> - 5.0.21-1
changelog:
  - add "mount -o bind" support and "mount --move" support (#109366, patch
    from Kasper Dupont)
  - add resolveDevice command, which cases down device labels.
  - remove "findlodev" from the documentation (#178587)
  - fix nash command name parsing bug (#178587)
  - fix "find" argument parsing (#178587)
  - add "find" handling for "-type d"


author: Peter Jones <pjones@redhat.com> - 5.0.19-1
changelog:
  - mkinitrd: get resolve_dm_name() and get_numeric_dev() from initscripts
    instead of a private copy
  - add block.[ch]:
    - move parse_sysfs_devnum(), sysfs_blkdev_probe(), and
      mkpathbyspec() from nash.c
    - add label/uuid/name lookups for block devices using libblkid
  - add lib.[ch]:
    - move makeFdCoe(), coeOpen(), coeFopen(), coeOpendir(), readFD(),
      nashLoggerV(), nashLogger(), qprintf(), eprintf(), smartmknod(),
      testing, quiet, reallyquiet from nash.c
    - move nashDefaultLogger(), from dm.c
    - move log enums and declarations from dm.h
  - dm.c: add dm_finish(), which does dm_task_destroy() and then library cleanup
    (solves an fd leak)
  - remove linux_fs.h, mount_by_label.[ch], name_to_dev_t.[ch]


author: Peter Jones <pjones@redhat.com> - 5.0.18-1
changelog:
  - make mkinitrd discover dm uuids
  - add uuid support to nash's "dm create" and "dm partadd"
  - add nash command "dm get_uuid $NAME"
  - add support for renamed dm raids


author: Peter Jones <pjones@redhat.com> - 5.0.14-1
changelog:
  - Remove vestigial loopback support.
  - Remove email addresses from man pages (which still need some work)


author: Peter Jones <pjones@redhat.com> - 5.0.11-1
changelog:
  - audit for open()s without appropriate closes()
  - make new functions coeOpen(), coeFopen(), and coeOpendir().  These behave
    like open(), fopen(), and opendir() except that they set any associated
    file descriptors to close on exec().
  - use them everywhere except where we open a console.


author: Peter Jones <pjones@redhat.com> - 5.0.5-1
changelog:
  - make PROBE, MODULES, and PREMODS load defaults from a config file
  - get rid of support for not using a dynamic /dev
  - add options to force device probes (for when PROBE is "no")
  - consolidate some duplicate code paths
  - make nash's otherCommand check PATH first and use what it finds there for
    any commands it needs to run, unless the command starts with "nash-",
    in which case the internal version is used unconditionally
  - remove the symlink hack for setuproot/preswitchroot/switchroot
  - wrap all the nash commands in mkinitrd with shell functions and use the
    "nash-" varient.
  - rework root fs creation so Jeremy can use the otherCommand feature


author: Peter Jones <pjones@redhat.com> - 5.0.4-1
changelog:
  - split switchroot into setuproot and switchroot, with presetuproot in
    between
  - make preswitchroot and setuproot execute through symlinks, so they may
    be replaced by a second initramfs image
  - add logic to mount filesystems specified in /etc/fstab.sys during setuproot
  - general code cleanups


author: Peter Jones <pjones@redhat.com> - 5.0.2-1
changelog:
  - add error and quiet printf functions
  - use them instead of testing quiet and typing stderr everywhere
  - actually make _all_ errors use eprintf (and thus stderr)
  - print strerror in errors instead of raw errno
  - make "getKernelCmdLine use readFD
  - make "getKernelArg" picky about if you've got the right command vs
    just one that starts with the same string
  - make "getKernelArg" handle "=" for you, so it either gives you the value
    when there is one, '\0' when there's not and it's EOL, or whitespace.
  - reformat some two-space-indent spots
  - check for short reads in catCommand
  - kill pivotroot
  - cleaned up resume messages
  - make mkrootdev use readFD
  - combine mkdevies and makedevs into mkblkdevs, no longer
    using /proc/partitions
  - don't use callocs+memcpy/strcpy+strcat when we can use asprintf
  - make setQuietCommand use getKenrelArg
  - make runStartup use readFD
  - patch from Alexandre Oliva to fix LVM-on-RAID1 /root and swap-on-LVM
    (bz #169059)
  - reorder device creation for easier maintenance create /dev/rtc
  - change fixme comment about lvm vgs
  - use cemit at some places we used a lot of emits before
  - reorder device node creation for clarity
  - use mkblkdevs instead of makedevs and mkdevices
  - decouple loopback root and lvm


author: Peter Jones <pjones@redhat.com> - 5.0.1-1
changelog:
  - create /dev/rtc
  - create /dev/tty, /dev/tty{0..11}, and /dev/ttyS{0..4}
  - tweak the messages output in loud mode during device node creation


author: Peter Jones <pjones@redhat.com> - 5.0.0-1
changelog:
  - remove support for pivotroot
  - remove support for non-initramfs initrds
  - remove support for 2.4 kernels
  - don't force scsi_mod before scsi modules; deps should bring it in.
    same for "unknown"; it's not needed any more.
  - lots of whitespace adjustment
  - minor messaging changes
  - no manual redirection to stderr or RCFILE, nor manual verbose checking
  - in light of these changes and other planned changes, this is 5.0.0


author: Peter Jones <pjones@redhat.com> - 4.2.23-2
changelog:
  - Fix module discovery to not always use the modules /dev/hda1 requires
    when using root-on-label.
  - Put the lvm check after the raid check, so the raid check atually gets run.


author: Peter Jones <pjones@redhat.com> - 4.2.22-1
changelog:
  - Only scan appended kernel command line args for duplicates once.
  - handle short reads correctly in nash's readFD
  - use calloc for things instead of malloc, since we usually need zeroed memory
    and we never memset
  - use canonicalize_file_name instead of malloc+realpath
  - honor quiet flag on suspend/resume
  - autodetect storage drivers in mkinitrd


author: Peter Jones <pjones@redhat.com> - 4.2.17-1
changelog:
  - Don't use udev or udevstart in the initrd; it's trivial to do
    all that work by looking for directories with "dev" nodes in sysfs
    and making the device from the dirname using major/minor from "dev"


author: Peter Jones <pjones@redhat.com> - 4.2.16-1
changelog:
  - Add a patch from Jeff Layton to remove files from the initramfs
    before executing the new init.  (slightly modified, #153069)


author: Peter Jones <pjones@redhat.com> - 4.2.11-1
changelog:
  - don't copy "rw" option into the initrd; use "ro" instead if it's
    the only option.
  - Don't print "unmounting old ..." messages in nash if we're set to quiet


author: Peter Jones <pjones@redhat.com> - 4.2.9-1
changelog:
  - invoke bash with "--norc" (#155986)
  - use binary udevstart.static, not a symlink
  - print exit status in nash when programs return an error


author: Peter Jones <pjones@redhat.com> - 4.2.6-1
changelog:
  - work correctly with "set -o noclobber"
  - wait longer after modprobe of usb-storage
  - fix a wrong error output file


author: Peter Jones <pjones@redhat.com> - 4.2.3-1
changelog:
  - use --ignorelockingfailure with lvm commands in the initrd, and only
    activate the volume / is on.  (#151172)


author: Peter Jones <pjones@redhat.com> - 4.2.0.3-1
changelog:
  - Make nash expand environment variables on command lines (#144474)
  - Make nash check pids returned from wait*() (#145660)


author: Jeremy Katz <katzj@redhat.com> - 4.1.17-1
changelog:
  - run udevstart again instead of sleeping, this will ensure all 
    devices are created in all cases after modules have been 
    loaded (thanks to notting)


author: Jeremy Katz <katzj@redhat.com> - 4.1.15-1
changelog:
  - new-kernel-pkg: set new kernels as default (#135161) when
    a) /etc/sysconfig/kernel contains UPDATEDEFAULT=yes
    b) --package foo is passed in and foo matches DEFAULTKERNEL 
       in /etc/sysconfig/kernel


author: Jeremy Katz <katzj@redhat.com> - 4.1.12-1
changelog:
  - update to work with udev 032, conflict with old udev
  - if udev is present, use it.  trying to avoid the use of udev if it's 
    installed is the road to things not working


author: Jeremy Katz <katzj@redhat.com> - 4.1.0-1
changelog:
  - mkinitrd: if using udev for the initrd, set things up appropriately 
    (based on patches from Harald Hoyer and Thomas Woerner)
  - nash: support for echo -n
  - nash: better error message on exec failures
  - nash: exec udev if we're called as a hotplug handler


author: Jeremy Katz <katzj@redhat.com> - 4.0.6-1
changelog:
  - various fixes from a code review by Steve Grubb which should fix 
    some of the lingering problems (#129673)
  - nash: warning fix from Michal Jaegermann (#129673)
  - grubby: removal with (hd0,0)


author: Jeremy Katz <katzj@redhat.com> - 4.0.4-1
changelog:
  - nash: fix mounting by label in some cases (tracked down by 
    Erik Jacobson, #129581, #129673, #129667, #129635)


author: Jeremy Katz <katzj@redhat.com> 4.0.3-1
changelog:
  - grubby: more (hd0,0) support (#125156)
  - mkinitrd.8: update manpage (#129585)
  - nash: fix some warnings


author: Jeremy Katz <katzj@redhat.com> 4.0.2-1
changelog:
  - nash: support bind mounting
  - grubby: support the (hd0,0)/path syntax for kernels and initrds in
    grub.conf (#114758, #125156, #120906)


author: Jeremy Katz <katzj@redhat.com> - 4.0.0-1
changelog:
  - create an initramfs on 2.6 kernels instead of an initrd
  - use new mount magic instead of pivot_root 
    on 2.6 kernels
  - try to handle the case of modules going away on kernel upgrades a 
    little bit more nicely (#123994)
  - avoid over-zealous creation of /dev/mapper/control (#127115)
  - improve nash(8) manpage (#127413)


author: Jeremy Katz <katzj@redhat.com> - 3.5.21-1
changelog:
  - new-kernel-package: add patch from Ryan Tilder to allow setting new 
    kernel as default (#117605)
  - mkinitrd: i2o_pci isn't in 2.6 (#120827)
  - new-kernel-pkg: conditionalize kernel binary name for 2.6 vs 2.4 
    on ppc/ppc64 (as it's vmlinuz in 2.6 instead of the 
    vmlinux from 2.4) (#120868)


author: Jeremy Katz <katzj@redhat.com> - 3.5.19-1
changelog:
  - nash/mkinitrd: quiet mode for nash and necessary mkinitrd changes 
    to work with it
  - mkinitrd: add lxo's patch for copying lvm.conf (#112099)
  - new-kernel-pkg: allow specifying the banner used in the boot loader config
    on the command line (#114809)


author: Jeremy Katz <katzj@redhat.com> 3.5.17-1
changelog:
  - mkinitrd: handle multiple spaces in modules.conf (from Lubomir Bulej)
  - nash: rebuild against new dietlibc fixing problems with root=LABEL= (#112623)
  - mkinitrd: determine kernel version and adjust modulefile appropriately 
    so that we look at /etc/modprobe.conf for 2.6 kernels
  - mkinitrd: first pass at getting lvm working on 2.4 -> 2.6 upgrade


author: Jeremy Katz <katzj@redhat.com> 3.5.16-1
changelog:
  - fixing handling of non-lvm case when /dev/mapper/control isn't present
  - add patch from Al Viro to get root dev in numeric form by grokking sysfs


author: Jeremy Katz <katzj@redhat.com> 3.5.15-1
changelog:
  - mkinitrd: add support for lvm2 (note: will not currently handle being
    on a running 2.4 kernel and installing 2.6 with lvm rootfs)


author: Jeremy Katz <katzj@redhat.com> 3.5.10-1
changelog:
  - clean up bogus warning in installkernel
  - only try to do grub configs on arches which support grub (#103261)


author: Matt Wilson <msw@redhat.com> 3.5.9-1
changelog:
  - add \n to error messages in grubby
  - NUL terminate buffer returned from readlink properly
  - symlinks are most likely relative, chdir to / before trying to
    follow them
  - yaboot needs boot prefix
  - silo needs boot prefix too


author: Jeremy Katz <katzj@redhat.com> 3.5.7-1
changelog:
  - pick modules from /lib/modules/$(uname -r)/updates first
  - be less confused by more than one module of a name


author: Jeremy Katz <katzj@redhat.com> 3.5.3-1
changelog:
  - mkinitrd: fix copying of pvs (#97314, #97289)
  - mkinitrd: use pvscan instead of lvmdiskscan to find PVs to work 
    better on other arches
  - mkinitrd: better check for dasd existence
  - mkinitrd: make certain lvm-mod is included if root on lvm


author: Jeremy Katz <katzj@redhat.com> 3.5.2-1
changelog:
  - mkinitrd: revert use of modprobe -c.  it breaks in the installer when we 
    don't have a modules.dep for the BOOT kernel
  - nash: return pivot_root call correctly (#97753)


author: Jeremy Katz <katzj@redhat.com> 3.5.0-1
changelog:
  - mkinitrd: add patch from gc@mandrakesoft.com to determine module 
    deps from modules.dep (#87873)
  - tweak patch to not break weird cases where module deps aren't all 
    you need :/
  - grubby: don't remove the last kernel (#60041)
  - mkinitrd: use modprobe -c to find module options (#89794)


author: Jeremy Katz <katzj@redhat.com> 3.4.51-1
changelog:
  - grubby: error out gracefully if we run out of space (#85424)
  - mkinitrd: copy parent dirs for pvs (#88962)
  - mkinitrd: exit with an exit status if tar fails (#90123)
  - new-kernel-pkg: only use the first entry for / (#90155)
  - grubby: fix a buffer overflow  (#90444)


author: Jeremy Katz <katzj@redhat.com> 3.4.49-1
changelog:
  - new-kernel-pkg: on iSeries, we don't have a boot loader, just make the 
    kernel + initrd combo file (/boot/vmlinux-version.img)


author: Jeremy Katz <katzj@redhat.com> 3.4.47-1
changelog:
  - mkinitrd: fix using options for loading modules
  - mkinitrd: don't use kernel parameters for dasd at mkinitrd time, 
    use what's in modules.conf


author: Jeremy Katz <katzj@redhat.com> 3.4.46-1
changelog:
  - new-kernel-pkg: add necessary bits for s390, some logic cleanups
  - grubby: fix root detection for s390{,x}


author: Jeremy Katz <katzj@redhat.com> 3.4.45-1
changelog:
  - grubby: add silo support (sparc)
  - grubby: add zipl support (s390{,x})
  - add grubby test cases for zipl support


author: Jeremy Katz <katzj@redhat.com> 3.4.43-1
changelog:
  - apply ppc patches for new-kernel-pkg and installkernel from Dan 
    Burcaw <dburcaw@terrasoftsolutions.com>
  - man page tweak (#85471)


author: Jeremy Katz <katzj@redhat.com> 3.4.40-1
changelog:
  - fix i2o module ordering (#83447)
  - ifarch'd build requires of dietlibc now that the build system has a way to
    handle these


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - change one test from a number to a string test that could otherwise
    fail in not properly setup chroot environments


author: <ewt@redhat.com>
changelog:
  - added support for yaboot
  - test script runs tests for all platforms
  - separated elilo configuration from lilo mode, allowing elilo specific
    tests to be run on any platform


author: <ewt@redhat.com>
changelog:
  - grubby now shortens lilo titles to ensure they are less then 16 characters
    long (76236)
  - mkinitrd would only turn on /dev/md0 if raid was needed; now it enables
    all raid devices listed in /proc/mdstat (82209)
  - use product name from /etc/redhat-release to generate label in grub.conf
    (82352)


author: <ewt@redhat.com>
changelog:
  - all mkdev() actions will create directories as needed (some code in
    mkdevices is now obsolete; I'll remove it later) (#73317)
  - added mkdev command to test the above
  - support diratime/nodiratime mount options (#78738)
  - grubby will follow symlinks when writing new config file (#78713)
  - don't depend on raidtab, use /proc/mdstat instead (#80424) this covers
    both mkinitrd and grubby


author: Jeremy Katz <katzj@redhat.com> 3.4.34-1
changelog:
  - grubby: fix segfault finding default if default doesn't have a root= (#66000)
  - don't include usb modules by default.  pass --with-usb to get usb modules
  - make sure kudzu exists before trying to exec it
  - handle multiple scsi hosts being present (#77422)
  - add /usr/sbin to default path (#79581)
  - fix using --builtin= (#80448)
  - grubby: preserve the mode on config files (#80776)


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - mkinitrd: add support for finding gzipped modules
  - mkinitrd: don't be noisy if we don't have lvm-mod loaded


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - grubby: don't bail when looking for root in appends of lilo-style configs
  - include grubby on x86_64


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix some syntax errors
  - use grep's -q flag to save a redirect in places where we're not redirecting
    stderr


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - grubby could segfault by going into its lilo checking if it couldn't find 
    a default to copy (default had no root= and --bad-image-okay wasn't 
    being used)


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - nash: create directories if needed in mkdevices command (#73090)
  - grubby: handle lilo case of non-linux default (#72202)


author: Erik Troan <ewt@redhat.com>
changelog:
  - --ifneeded is obsolete; we always need initrds
  - grubby lets you specify multiple indexes for --info
  - grubby lets you select kernels by title
  - added showlabels to nash
  - new-kernel-pkg sets the root device from /etc/fstab rather then inheriting it
  - new-kernel-pkg removes all entries w/ a duplicate label (67459)


author: Erik Troan <ewt@redhat.com>
changelog:
  - added loadinitrd (used by mkbootdisk) on ia32 and sparc
  - modules "off" and "null" should be ignored (67086)
  - mkrootdev looks for root=LABEL=/ in /proc/cmdline, so root by label
    works again (fully determined by root= kernel parameter)
  - added --update-kernel and --remove-args arguments to grubby
  - kernel specification of ALL supported by grubby
  - DEFAULT accepted much more consistently
  - grubby --info displays info on all kernels specified, not just the first
  - ext3 need mbcache now (67354)
  - grubby allows config file entry numbers to be used as kernel paths
  - support /etc/sysconfig/grub.conf
  - display lba info from lilo.conf file in --info


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - don't run lilo twice on kernel removal in new-kernel-pkg
  - don't run grubby to add/remove kernels from new-kernel-pkg if 
    bootloader config doesn't


author: Erik Troan <ewt@redhat.com>
changelog:
  - added --bootloader-probe to grubby
  - wrote a man page for grubby
  - include grubby on ia64
  - updated new-kernel-pkg to work with lilo/elilo
  - added --info=DEFAULT option


author: Erik Troan <ewt@redhat.com>
changelog:
  - added --grub option so grub tests could run on ia64
  - added some basic tests of lilo default directive handling


author: Erik Troan <ewt@redhat.com>
changelog:
  - added --nopivot (53679)
  - honor INSTALL_PATH in installkernel (32833)
  - installkernel versions old kernels as well (52756)
  - lilo support added to grubby


author: Erik Troan <ewt@redhat.com>
changelog:
  - cleaned up usage message
  - added --omit-lvm-modules to man page
  - added --builtin option (65250)
  - skip comments in fstab (65249)
  - added findlodev to nash, use that to pick block device (63421)
  - support -o option in nash's mount (59185)
  - look for xfs_dmapi (60066)
  - added > support for executed commands (61180)
  - grubby copies permissions from old config file (59227)
  - use options from fstab for root filesystem (56071)
  - try and be better about returning nonzero on error (60203)
  - make modprobe symlink properly to avoid kernel message (62145)
  - support linear raid (12775)
  - support fallback option in grub config (54794)
  - comments in template entries not handled quite right (65198)


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - fix probing for LVM usage to require a volume group to exist before adding
    the module
  - --omit-lvm-modules will omit LVM modules
  - add support for root device being LVM


author: Erik Troan <ewt@redhat.com>
changelog:
  - look for a non /tmpfs directory
  - added support for xfs
  - use with raid md.o if it exists
  - fixed bug in echo
  - use find form nash rather then /usr (mkinitrd shouldn't need /usr
    mounted)


author: Erik Troan <ewt@redhat.com>
changelog:
  - added support for mounting root filesystem by label
  - switched to dietlibc from minilibc
  - fix so --preload= works [33675,57560,44377]
  - added info on --image-version and --nocompress to man page [57560]
  - set fileystem check interval to 0 in case the system clock
    is borked [51454]
  - give a proper error when run by a user other then root [27218,53159]
  - grubby statically linked against popt [55305]
  - cleaned up verbose output a bit [21791]


author: Erik Troan <ewt@redhat.com>
changelog:
  - fixed bug handling invalid default (MF #52889)
  - in some cases we would set the default to point at a removed image


author: Matt Wilson <msw@redhat.com>
changelog:
  - make consoles with the correct minor numbers
  - applied patch from hjl to fix fstab parsing (#50819)


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - skip errors finding jbd as a module if we're skipping them trying to find
    ext3 so that you can build a kernel with ext3 built-in and still use an
    initrd


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't print errors if /etc/raidtab doesn't exist
  - or /etc/{modules.conf,conf.modules}, for that matter


author: Matt Wilson <msw@redhat.com>
changelog:
  - don't dig through /etc/fstab to find out if we have a filesystem on
    a RAID device, it's usually mounted by label so /dev/mdN isn't there
    at all (#46525)


author: Erik Troan <ewt@redhat.com>
changelog:
  - let nash be invoked as modprobe to avoid a modprobe failure to exec
  - nash will try to run arbitrary commands now (removing insmod as a special 
    case)


author: Matt Wilson <msw@redhat.com>
changelog:
  - added patch from twaugh to avoid blindly adding scsi_mod
    and sd_mod to initrd if they are not needed (#24114)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Enlarge initrds, needed for systems with both IDE and SCSI
    (Bug #23846)
  - Version 2.[6789] probably shouldn't identify itself as 2.6
    with --version. ;)
  - bzip2 source


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - now works when /usr is not mounted (do not rely on /usr/bin/install)
  - slight cleanups, better usage message


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Now automatically includes necessary raid modules
  - --omit-raid-modules now omits raid modules
  - tiny doc updates


author: Matt Wilson <msw@redhat.com>
changelog:
  - --omit-scsi-modules now omits all scsi modules
  - updated documentation
  - mkinitrd now grabs scsi_hostadapter modules from anywhere -
    some RAID controller modules live in block/


author: Matt Wilson <msw@redhat.com>
changelog:
  - Ignore the absence of scsi modules, include them if they are there, but
    don't complain if they are not.
  - changed --no-scsi-modules to --omit-scsi-modules (as it should have been)


author: Jakub Jelinek <jj@ultra.linux.cz>
changelog:
  - fix for combined sparc/sparc64 insmod, also pluto module is really
    fc4:soc:pluto and we don't look at deps, so special case it.


author: Erik Troan <ewt@redhat.com>
changelog:
  - added 'make archive' rule to Makefile
  - rewrote install procedure for more robust version handling
  - be smarter about grabbing options from /etc/conf.modules


author: Erik Troan <ewt@redhat.com>
changelog:
  - Only use '-s' to install binaries if /usr/bin/strip is present.
  - Use an image size of 2500 if binaries can't be stripped (1500 otherwise)
  - Don't use "mount -o loop" anymore -- losetup the proper devices manually
  - Requires losetup, e2fsprogs


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - Fixed a bug in parsing options.
  - Changed to use a build tree, then copy the finished tree into the
    image after it is built.
  - Added patches derived from ones written by Christian Hechelmann which
    add an option to put the kernel version number at the end of the module
    name and use install -s to strip binaries on the fly.


author: Warren Togami <wtogami@redhat.com> 1.4.4-8
changelog:
  - Remove Vendor tag
  - mknbi.html in %doc
  - Do not create (empty) debuginfo package
  - add suggested flags to make install


author: Eric Harrison <eharrison@mesd.k12.or.us> 1.4.4-3
changelog:
  - bumped release number, Fedora Extras 4 included an i386-only 1.4.4-2
    gcc4 patches written by "Dams Nade" (anvil)
    spec file clean-ups


author: Ken Yap <ken_yap@users.sourceforge.net>
changelog:
  - Merge patches from Isac, and Michael Brown pertaining to padding
    of initrds and memdisk images.
    Merge patch to menu-simple.c from isac.
    Merge corrected algorithm for calculating used sectors from isac.


author: Oron Peled <oron@actcom.co.il>
changelog:
  - Fixes to mknbi.spec:
    Add defattr for non-root builds
    Clean install directory before make install.
    Use directory macros -- _bindir et al.
    Make mknbi a relocateable package -- add Prefix tag


author: Ken Yap <ken_yap@users.sourceforge.net>
changelog:
  - Merged in changes by Eric Biederman to compute and store a checksum
    in image. Ready for ELF parameter passing convention.


author: Ken Yap <ken_yap@users.sourceforge.net>
changelog:
  - Fixed start32.S to not rely on where it's called from, essential
    for booting from Etherboot 5.1+. For this we have to switch GDT
    like startmenu.S does.


author: Ken Yap <ken_yap@users.sourceforge.net>
changelog:
  - Add an EXTRAVERSION to Makefile, to be printed out by first32.c.
  - Modified call to int15h/e801 in start32.S to check for return values
    in CX, DX in case BIOS doesn't return them in AX, BX.
  - Ported internal menu program from Etherboot to be external menu
  program for mknbi-menu.
  - Updated URL for FreeDOS kernel sources.


author: Ken Yap <ken_yap@users.sourceforge.net>
changelog:
  - Add E820H memory sizing routines.
  - Don't put ramdisk higher than larger of 896MB and setup.S:ramdisk_max


author: Ken Yap <ken_yap@users.sourceforge.net>
changelog:
  - Implement --rdbase for mknbi-fdos and mknbi-dos to specify starting
    address of ramdisk (floppy image).
  - Make first.*dos depend on Makefile so that the version signature gets
    updated when the version is updated.
  - Print some friendly advice if --ip is not specified and there is no
    ramdisk argument (i.e. probably needs NFSroot).
  - Shuffle segments to make more space for parameters and first32. This
    version and future versions may not work with Etherboot images that have
    been compiled with BOOTP_DATA_AT_0x93Cxx. (There is some reprieve due to
    first32.c not using all 6kB of the allocated room yet, but that space
    may be used some day.)
  - Implement interception and decoding of the mem= kernel parameter to
    use as top of memory for the purpose of relocating the ramdisk.


author: Ken Yap <ken_yap@users.sourceforge.net>
changelog:
  - Small fixes to allow make -j, print a warning if zImage is too large,
    and implement --disableharddisk option.


author: Ken Yap <ken_yap@users.sourceforge.net>
changelog:
  - Parameters passed to kernel are duplicated due to extra lines in mknbi.pl,
    remove one set of lines.
  - Use new (s)printf that has no buffer and thus no limit on stdout length per
    call.


author: Ken Yap <ken_yap@users.sourceforge.net>
changelog:
  - Implement --rdbase to control ramdisk load address.
  - Implement missing VENDOR_SELECTION feature per spec.
  - Merged in support for --rootmode=rw|ro.
  - Minor documentation updates


author: Ken Yap <ken_yap@users.sourceforge.net>
changelog:
  - Forgot to update consistency checking code in mknbi-*dos to take into
    account full version number.
  - Moving Etherboot to 0x94000 broke mknbi-fdos because setup segment was at
    0x97000. Move setup segment to 0x93000. Actually ($reloc + 0x300) * 16.


author: Ken Yap <ken_yap@users.sourceforge.net>
changelog:
  - Support setup.S version 0x0202, put version in vendortag
  - Derive version number of mknbi.pl and first32.c from VERSION in Makefile.
  - Replace 0x9000 by $relocseg, and add support for placement of Linux segments at 0x90000 and 0x80000 upwards.
  - Makefile now makes 2 more versions of first32{,pm,elf}.linux for placement at 0x92200 and 0x82200.


author: Ken Yap <ken_yap@users.sourceforge.net>
changelog:
  - Development release. Unpack format fix in Perl code. Pass drive number
    to DOS. Update memory map comments in first32.c.


author: Ken Yap <ken_yap@users.sourceforge.net>
changelog:
  - Development release. New binary stubs in C, for protected mode, for ELF,
    for menu. Little fixes in Perl code.


author: Ken Yap <ken_yap@users.sourceforge.net>
changelog:
  - Fixed bug in first-linux.S, don't use tftp root dir as fallback for rootpath
  - Added --nosquash option in case TruncFD doesn't work


author: - Bastien Nocera <bnocera@redhat.com> - 2.20.0-6
changelog:
  - Fix audio preview command-line to use decodebin so playbin doesn't
    pop up a window for videos detected as audio


author: Alexander Larsson <alexl@redhat.com> - 2.16.2-7
changelog:
  - Look for beagle before tracker, because tracker autostarts
    This lets us support having both installed at the same time.
  - Remove buildreqs for beagle, as they are not necessary with
    the dynamic work.


author: Matthias Clasen <mclasen@redhat.com> - 2.16.0-6
changelog:
  - Fix scripts according to the packaging guidelines
  - Require GConf2 for the scripts
  - Require pkgconfig for the -devel package


author: David Zeuthen <davidz@redhat.com> 2.10.0-3
changelog:
  - Include patches for desktop background memory saving (GNOME bug #169347)
  - Obsoletes: nautilus-media (#153223)


author: Alexander Larsson <alexl@redhat.com> - 2.8.1-3
changelog:
  - Slightly less bad error dialog when there is no handler for a file.
    Not ideal, but this change doesn't change any strings.


author: Alexander Larsson <alexl@redhat.com> - 2.8.1-2
changelog:
  - Fix open with menu on mime mismatch
  - Create desktop links ending with .desktop (#125104)
  - Remove old cruft from specfile


author: Mike A. Harrisn <mharris@redhat.com> 2.5.91-2
changelog:
  - Changed BuildRequires: XFree86-libs >= 4.2.99 to BuildRequires: XFree86-devel
  - Fixed BuildRoot to use _tmppath instead of /var/tmp


author: Alexander Larsson <alexl@redhat.com> 2.3.9-1
changelog:
  - update
  - Add patch to ignore kde desktop links
  - Re-enable kdesktop detection hack.
    kde doesn't seem to support the manager selection yet


author: Alexander Larsson <alexl@redhat.com>
changelog:
  - Update to the latest bugfixes from cvs.
  - Fixes #84291 for nautilus, context menu duplication and some other small bugs.


author: Alexander Larsson <alexl@redhat.com> 2.2.1-2
changelog:
  - Add a patch to fix the forkbomb-under-kde bug (#81520)
  - Add a patch to fix thumbnail memory leak
  - require libXft.so.2 instead of Xft, since that changed in the XFree86 package


author: Alexander Larsson <alexl@redhat.com> 2.2.0.2-1
changelog:
  - Update to 2.2.0.2, fixes bg crasher
  - parallelize build
  - Added patch from cvs that fixes password hang w/ smb


author: Havoc Pennington <hp@redhat.com>
changelog:
  - perl-munge the icon names in a couple desktop files
    to find redhat-network-server.png and redhat-file-manager.png.
    Upstream icon names here were weird and seem broken.


author: Alexander Larsson <alexl@redhat.com> 2.1.5-2
changelog:
  - Add cdburn patch.
  - Remove nautilus-1.1.19-starthere-hang-hackaround.patch
  - Require nautilus-cd-burner


author: Havoc Pennington <hp@redhat.com>
changelog:
  - put button press mask in triple-click patch, maybe it will work
  - remove html-hack patch as it does nothing useful


author: Havoc Pennington <hp@redhat.com>
changelog:
  - require newer redhat-artwork, -menus, eel2, gnome-vfs2 to avoid
    bogus bug reports
  - add hack for HTML mime type handling in a web browser, not 
    nautilus


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Add a simple patch so that redhat-config-packages can disable 
    the new window behavior for mounted CDs behavior.


author: Havoc Pennington <hp@redhat.com>
changelog:
  - ignore the "add_to_session" preference as it only broke stuff
  - pad the left margin a bit to cope with poor word wrapping


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Relibtoolize to fix relink problems for solib components
  - Add LANG=en_US to %makeinstall as well
  - Back out previous change, force locale to en_US to prevent UTF-8 problems
  - Add workaround for intltool-merge bug on ia64


author: Havoc Pennington <hp@redhat.com>
changelog:
  - drop Milan-specific features, including png10 and ac25 patches
  - copy in 1.0.5 help component to avoid large risky patch
  - remove .la files
  - drop mozilla from ia64 again
  - remove oaf file from nautilus-mozilla that was also in the base 
    package


author: Christopher Blizzard <blizzard@redhat.com>
changelog:
  - require Mozilla 0.9.7
  - Add patch that puts mozilla profile startup before embedding is initialized


author: Havoc Pennington <hp@redhat.com>
changelog:
  - I screwed up the build yesterday, so it didn't actually contain the
    fixes mentioned. This build should contain them.


author: Havoc Pennington <hp@redhat.com>
changelog:
  - fix bug causing 32000 stats or so in large directories, 
    should speed things up somewhat
  - fix #52104 via gruesome kdesktop-detection hack and setting
    window type hint on our desktop window
  - fix so Start Here icon displays in sidebar
  - don't load non-local .desktop files


author: Havoc Pennington <hp@redhat.com>
changelog:
  - make Programs icon into a link, to match the other .desktop files
  - own various directories #51164
  - web page titles in Japanese, #51709
  - tree defaults to only directories #51850


author: Havoc Pennington <hp@redhat.com>
changelog:
  - make start here icon work again
  - kill some warning spew, #51661
  - cache getpwnam() results to speed things up a bit


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Fix problem with missing desktop starthere.desktop file
  - New snapshot from our branch, fixes:
    - On upgrade, icons migrated from GNOME desktop are not properly lined up
      (#51436)
    - icons dropped on the desktop don't end up where dropped. (#51441)
    - Nautilus shouldn't have fam monitor read-only windows. This
      keeps CDROMS from being unmounted until you close all

      nautilus windows pointing to them. (#51442)
    - Warnings about 'cannot statfs...' when moving items to trash.
  - Use separate start-here.desktop for panel, since the one used
    for the root window only works from Nautilus.


author: Alexander Larsson <alexl@redhat.com>
changelog:
  - Changed starthere .desktop files to be links instead
  - of spawning a new nautilus. This makes start-here:
  - much faster.


author: Havoc Pennington <hp@redhat.com>
changelog:
  - Sync our CVS version; fixes some MUSTFIX
    (the one about drawing background on startup, 
     properly translate desktop files, etc.)


author: Alexander Larsson <alexl@redhat.com> 1.0.4-21
changelog:
  - Remove the "don't run as root" warning.
  - Remove eazel from bookmarks
  - langified (again? did someone change it?)


author: Havoc Pennington <hp@redhat.com>
changelog:
  - Fix crash-on-startup showstopper
  - Fix can't-find-images bug (this one was only showing up
    when built with debug symbols, since it was an uninitialized memory
    read)


author: Havoc Pennington <hp@redhat.com>
changelog:
  - sync new tarball from our CVS branch, 
    fixes some drag-and-drop, changes URI scheme names,
    etc.


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Add BuildRequires (#49539, 49537)
  - Fix %post, %postun (#49720)
  - Background efficiency improvements and hacks


author: Havoc Pennington <hp@redhat.com>
changelog:
  - move first time druid patch into my "CVS outstanding" patch
  - try to really remove Help/Feedback
  - try to really fix Help/Community Support
  - try again to get Start Here in the Go menu
  - try again to get Start Here on the desktop
  - don't show file sizes for .desktop files


author: Havoc Pennington <hp@redhat.com>
changelog:
  - update to my latest 'cvs diff -u' (adds default 
    Start Here link, displays .directory name in sidebar)
  - include /etc/X11/* links (starthere, sysconfig, serverconfig)


author: Alexander Larsson <alexl@redhat.com>
changelog:
  - Make the fam dependency a real runtime dependency
  - by linking to libfam (nautilus-1.0.4-fam-lib.patch)
  - Cleaned up specfile.


author: Alexander Larsson <alexl@redhat.com>
changelog:
  - Change default background and rubberband color.
  - Use the sidebar tabs from the default theme
  - BuildDepend on fam-devel, depend on fam
  - Disable the eazel update pages in the first-time druid.
  - Remove the eazel logo from the first-time druid


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 1.0.4, removes eazel services icon and wizard page
  - Eazel logo is still in startup wizard for now, needs fixing


author: Havoc Pennington <hp@redhat.com>
changelog:
  - move to a CVS snapshot of nautilus for now
    (Darin is my hero for having distcheck work out of CVS)


author: Gregory Leblanc <gleblanc@grego1.cu-portland.edu>
changelog:
  - Added BuildRequires lines
  - Changed Source to point to ftp.gnome.org instead of just the tarball name
  - Moved %description sections closer to their %package sections
  - Moved %changelog to the end, where so that it's not in the way
  - Changed configure and make install options to allow moving of
    libraries, includes, binaries more easily
  - Removed hard-coded paths (don't define %prefix or %docdir)
  - replace %{prefix}/bin with %{_bindir}
  - replace %{prefix}/share with %{_datadir}
  - replace %{prefix}/lib with %{_libdir}
  - replace %{prefix}/include with %{_includedir}


author: Lennart Poettering <lpoetter@redhat.com> 0.9.7-0.16.svn20071017
changelog:
  - Another SVN snapshot, fixing another round of bugs (#330541)
  - Split libpulscore into a seperate package to work around multilib limitation (#335011)


author: Lennart Poettering <lpoetter@redhat.com> 0.9.7-0.12.svn20070925
changelog:
  - New SVN snapshot
  - Split off libflashsupport again
  - Rename "-lib" packages to "-libs", like all other packages do it.
  - Provide esound


author: Lennart Poettering <lpoetter@redhat.com> 0.9.7-0.9.svn20070904
changelog:
  - Update SVN snapshot
  - ship libflashsupport in our package
  - drop pulseaudio-devel since libpulsecore is not linked statically


author: Lennart Poettering <lpoetter@redhat.com> 0.9.7-0.3.svn20070812
changelog:
  - Depend on tcp_wrappers-devel instead of tcp_wrappers, to make sure we
    actually get the headers installed.


author: Lennart Poettering <lpoetter@redhat.com> 0.9.7-0.2.svn20070812
changelog:
  - Update snapshot, contains 64 bit build fixes, and disables module-x11-xsmp by
    default to avoid deadlock when PA is started from gnome-session


author: Pierre Ossman <drzeus@drzeus.cx> 0.9.5-4
changelog:
  - Add patch to handle ALSA changing the frame size (bug 230211).
  - Add patch for suspended ALSA devices (bug 228205).


author: Pierre Ossman <drzeus@drzeus.cx> 0.9.5-3
changelog:
  - Add esound-compat subpackage that allows PulseAudio to be a drop-in
    replacement for esd (based on patch by Matthias Clasen).
  - Backport patch allows startup to continue even when the users'
    config cannot be read.


author: Pierre Ossman <drzeus@drzeus.cx> 0.9.3-1
changelog:
  - Update to 0.9.3
  - GLib 1.2 bindings dropped.
  - Howl compat dropped as Avahi is supported natively.
  - Added fix for pc files on x86_64.


author: Pierre Ossman <drzeus@drzeus.cx> 0.8.1-1
changelog:
  - Update to 0.8.1
  - Split into more packages
  - Remove the modules' static libs as those shouldn't be used (they shouldn't
    even be installed)


author: James Antill <jantill@redhat.com> - 2.5.1-15
changelog:
  - Do codec lowercase in C Locale.
  - Resolves: 207134 191096
  - Fix stupid namespacing in pysqlite, minimal upgrade to 2.3.3 pysqlite
  - Resolves: 263221


author: James Antill <jantill@redhat.com> - 2.5.1-13
changelog:
  - Add tix buildprereq
  - Add tkinter patch
  - Resolves: #281751
  - Fix ctypes loading of libraries, add requires on binutils
  - Resolves: #307221
  - Possible fix for CVE-2007-4965 possible exploitable integer overflow
  - Resolves: #295971


author: Jeremy Katz <katzj@redhat.com> - 2.5.1-4
changelog:
  - fix _elementtree.so build (#245703)
  - ensure that extension modules we expect are actually built rather than 
    having them silently fall out of the package


author: Jeremy Katz <katzj@redhat.com> - 2.5.3-8
changelog:
  - fix extensions to use shared libpython (#219564)
  - all 64bit platforms need the regex fix (#122304)


author: Jeremy Katz <katzj@redhat.com> - 2.5.3-3
changelog:
  - fix atexit traceback with failed syslog logger (#218214)
  - split libpython into python-libs subpackage for multilib apps 
    embedding python interpreters


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - support db 4.5
  - obsolete python-elementtree; since it requires some code tweaks, don't 
    provide it
  - obsolete old python-sqlite; provide the version that's actually included


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - fix _md5 and _sha modules (Robert Sheck)
  - no longer provide optik compat; it's been a couple of years now
  - no longer provide the old shm module; if this is still needed, let's 
    build it separately
  - no longer provide japanese codecs; should be a separate package


author: Mihai Ibanescu <misa@redhat.com> - 2.4.99.c1
changelog:
  - Updated to 2.5c1. Merged fixes from FC6 too:
  - Fixed bug #199373 (on some platforms CFLAGS is needed when linking)
  - Fixed bug #198971 (case conversion not locale safe in logging library)
  - Verified bug #201434 (distutils.sysconfig is confused by the change to make
    python-devel multilib friendly) is fixed upstream


author: Mihai Ibanescu <misa@redhat.com> - 2.4.3-6
changelog:
  - Fixed bug #192592 (too aggressive assertion fails) - SF#1257960
  - Fixed bug #167468 (Doc/tools not included) - added in the python-tools package


author: Peter Jones <pjones@redhat.com> 2.4.1-12
changelog:
  - Fixed bug #169159 (check for argc>0 and argv[0] == NULL, not just
      argv[0][0]='\0')
    Reworked the patch from -8 a bit more.


author: Mihai Ibanescu <misa@redhat.com> 2.4.1-10
changelog:
  - Fixed bug #169159 (don't let python core dump if no arguments are passed in)
    Reworked the patch from -8 a bit more.


author: Mihai Ibanescu <misa@redhat.com> 2.4.1-7
changelog:
  - Fixed bug #169046 (realpath is unsafe); thanks to 
    Peter Jones <pjones@redhat.com> and Arjan van de Ven <arjanv@redhat.com> for
    diagnosing and the patch.


author: Mihai Ibanescu <misa@redhat.com> 2.4.1-2
changelog:
  - Fixed bug #143667 (python should own /usr/lib/python* on 64-bit systems, for
    noarch packages)
  - Fixed bug #143419 (BuildRequires db4 is not versioned)


author: Mihai Ibanescu <misa@redhat.com> 2.4-6
changelog:
  - building the docs from a different source rpm, to decouple bootstrapping
    python from having tetex installed


author: Jeff Johnson <jbj@jbj.org> 2.4-2
changelog:
  - db-4.3.21 returns DB_BUFFER_SMALL rather than ENOMEM (#141994).
  - add Provide: python(abi) = 2.4
  - include msgfmt/pygettext *.pyc and *.pyo from brp-python-bytecompile.


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-10
changelog:
  - Fixed bug #77418 (Demo dir not packaged)
  - More tweaking on #19347 (Moved Tools/ under /usr/lib/python2.3/Tools)


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-8
changelog:
  - Fixed bug #129769: Makefile in new python conflicts with older version found
    in old python-devel
  - Reorganized the spec file to get rid of the aspython2 define; __python_ver
    is more powerful.


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-7
changelog:
  - Including html documentation for non-i386 arches
  - Fixed #125362 (python-doc html files have japanese character encoding)
  - Fixed #128923 (missing dependency between python and python-devel)


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-6
changelog:
  - Fixed #128030 (help() not printing anything)
  - Fixed #125472 (distutils.sysconfig.get_python_lib() not returning the right
    path on 64-bit systems)
  - Fixed #127357 (building python as a shared library)
  - Fixed  #19347 (including the contents of Tools/scripts/ in python-tools)


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-3
changelog:
  - Added an optik.py that provides the same interface from optparse for
    backward compatibility; obsoleting python-optik


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-1
changelog:
  - Updated to 2.3.4-1 with Robert Scheck's help (bug #124764)
  - Added BuildRequires: tix-devel (bug #124918)


author: Mihai Ibanescu <misa@redhat.com> 2.3.3-6
changelog:
  - Correct fix for #122304 from upstream:
    http://sourceforge.net/tracker/?func=detail&atid=105470&aid=931848&group_id=5470


author: Mihai Ibanescu <misa@redhat.com> 2.3.3-4
changelog:
  - Fix for bug #122304 : splitting the domain name fails on 64-bit arches
  - Fix for bug #120879 : including Makefile into the main package

  - Requires XFree86-devel instead of -libs (see bug #118442)


author: Mihai Ibanescu <misa@redhat.com> 2.3-0.2
changelog:
  - Building python 2.3
  - Added more BuildRequires
  - Updated the startup files for modulator and pynche; idle installs its own
    now.


author: Mihai Ibanescu <misa@redhat.com> 2.2.2-25
changelog:
  - Fixed bug #84886: pydoc dies when run w/o arguments
  - Fixed bug #84205: add python shm module back (used to be shipped with 1.5.2)
  - Fixed bug #84966: path in byte-compiled code still wrong


author: Jeremy Katz <katzj@redhat.com> 2.2.2-23
changelog:
  - ftp uri's should be able to specify being rooted at the root instead of 
    where you login via ftp (#84692)


author: Mihai Ibanescu <misa@redhat.com> 2.2.2-22
changelog:
  - Using newer Japanese codecs (1.4.9). Thanks to 
    Peter Bowen <pzb@datastacks.com> for pointing this out.


author: Mihai Ibanescu <misa@redhat.com> 2.2.2-13
changelog:
  - Attempt to look both in /usr/lib64 and /usr/lib/python2.2/site-packages/:
    some work on python-2.2.2-lib64.patch


author: Mihai Ibanescu <misa@redhat.com> 2.2.2-11.7.3
changelog:
  - Fixed bug #82544: Errata removes most tools
  - Fixed bug #82435: Python 2.2.2 errata breaks redhat-config-users
  - Removed .lib64 and - files that get installed after we fix the multilib
    .py files.


author: Jeremy Katz <katzj@redhat.com> 2.2.2-8
changelog:
  - urllib2 didn't support non-anonymous ftp.  add support based on how 
    urllib did it (#80676, #78168)


author: Mihai Ibanescu <misa@redhat.com> 2.2.2-7
changelog:
  - Fix bug #79647 (Rebuild of SRPM fails if python isn't installed)
  - Added a bunch of missing BuildRequires found while fixing the
    above-mentioned bug


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  2.2.2-3.7.3
  - Recompiled for 7.3 (to fix the -lcrypt bug)
  - Fix for the spurious error message at the end of the build (build-requires
    gets confused by executable files starting with """"): make the tests
    non-executable.


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  2.2.2-5
  - Fixed configuration patch to add -lcrypt when compiling cryptmodule.c

  2.2.2-4
  - Spec file change from Matt Wilson <msw@redhat.com> to disable linking 
    with the C++ compiler.


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  2.2.2-3.*
  - Merged patch from Karsten Hopp <karsten@redhat.de> from 2.2.1-17hammer to
    use %{_libdir}
  - Added XFree86-libs as BuildRequires (because of tkinter)
  - Fixed duplicate listing of plat-linux2
  - Fixed exclusion of lib-dynload/japanese
  - Added lib64 patch for the japanese codecs
  - Use setup magic instead of using tar directly on JapaneseCodecs


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  2.2.2-2
  - Fix #76912 (python-tools contains idle, which uses tkinter, but there is no
    requirement of tkinter from python-tools).
  - Fix #74013 (rpm is missing the /usr/lib/python2.2/test directory)


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  - builds as python2 require a different libdb
  - changed the buildroot name of python to match python2 builds


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2-16
changelog:
  - the same, but in builddirs - this will remove them from the 
    docs package, which doesn't look in the buildroot for files.


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2-8
changelog:
  - Make files in /usr/bin install side by side with python 1.5 when
  - Drop explicit requirement of db4
    built as python2


author: Nalin Dahyabhai <nalin@redhat.com> 2.2-5
changelog:
  - disable ndbm support, which is db2 in disguise (really interesting things
    can happen when you mix db2 and db4 in a single application)


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2-0.11c1
changelog:
  - 2.2 RC 1
  - Don't include the _tkinter module in the main package - it's 
    already in the tkiter packace
  - Turn off the mpzmodule, something broke in the buildroot


author: Matt Wilson <msw@redhat.com> 2.2-0.9b2
changelog:
  - changed DESTDIR to point to / so that distutils will install dynload
    modules properly in the installroot


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2-0.4a4
changelog:
  - 2.2a4
  - Enable UCS4 support
  - Enable IPv6
  - Provide distutils
  - Include msgfmt.py and pygettext.py


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - fix the "requires" clause, it lacked a space causing problems
  - use %{_tmppath}
  - don't define name, version etc
  - add the available patches from the Python home page


author: Matt Wilson <msw@redhat.com>
changelog:
  - modify all files to use "python2.0" as the intrepter
  - don't build the Expat bindings
  - build against db1


author: Jeremy Hylton <jeremy@beopen.com>
changelog:
  - updated for 2.0c1
  - build audioop, imageop, and rgbimg extension modules
  - include xml.parsers subpackage
  - add test.xml.out to files list


author: Jeremy Hylton <jeremy@beopen.com>
changelog:
  - Version 2 of 2.0b1
  - Make the package relocatable.  Thanks to Suchandra Thapa.
  - Exclude Tkinter from main RPM.  If it is in a separate RPM, it is
    easier to track Tk releases.


author: Nils Philippsen <nphilipp@redhat.com> 1.9.16-1
changelog:
  - use warning dialog, exit gracefully if hwclock fails to allow operation in a
    XEN guest (#357311)


author: Nils Philippsen <nphilipp@redhat.com> 1.9.13-1
changelog:
  - change hicolor-icon-theme requirement to be "uncolored" (without
    "(post)"/"(postun)")
  - use full path to call gtk-update-icon-cache
  - don't let gtk-update-icon-cache fail scriptlets
  - use "make %{?_smp_mflags}"
  - remove "ExclusiveOS: Linux"
  - remove obsolete no.po translation file
  - use "%defattr(-,root,root,-)"
  - add release tags to changelog versions to appease rpmlint


author: Nils Philippsen <nphilipp@redhat.com> 1.9.12-1
changelog:
  - use xdg-open if available
  - don't throw exceptions when selecting non-geographic time zones (#293241)
  - fix permissions of timeconfig tool (#241737)


author: Nils Philippsen <nphilipp@redhat.com> 1.9.11-1
changelog:
  - don't remove notebook pages when acting as a firstboot module (#296711)
  - pick up updated translations


author: Nils Philippsen <nphilipp@redhat.com> 1.9.4-1
changelog:
  - display error message if setting time and date fails (#251818)
  - require newt-python from Fedora 8 on (#251362)


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - use smoother zoom steps when using the mouse wheel
  - hide city label when using the mouse wheel to zoom


author: Nils Philippsen <nphilipp@redhat.com> 1.9.2-1
changelog:
  - fix python formatting in Japanese translation (#248667, Jens Petersen)
  - make "make archive" work with Hg repo


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - add scrollbars to timezone canvas (#230690)
  - scroll to city selected via treeview
  - don't resize window due to excessively long comments of cities


author: Nils Philippsen <nphilipp@redhat.com> 1.8.96-1
changelog:
  - handle missing /etc/ntp.conf gracefully (#237777)
  - versionize obsoletes
  - pick up updated translations


author: Nils Philippsen <nphilipp@redhat.com> 1.8.92-1
changelog:
  - use correct modes when installing, to avoid fixing modes when packaging and
    to be able to strip down %files
  - don't ship unneeded regions file


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - mention that we are upstream
  - use preferred buildroot
  - use Category: ... System; ... in desktop file
  - clean buildroot before installing
  - fix licensing blurb in PO files
  - require python >= 2.0 instead of python2
  - recode spec file to UTF-8
  - don't mark ntp.template as %config


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - display to-be-selected city inside map instead of status bar (#211550)
  - remove remaining regions cruft
  - make currently selected city non-selectable


author: Nils Philippsen <nphilipp@redhat.com> 1.8.11-1
changelog:
  - provide more info when encountering bad timezone translations (i.e. not split
    into Region,Continent/Location) (#219773)
  - pick up updated translations (#216073)


author: Nils Philippsen <nphilipp@redhat.com> 1.8.8-1
changelog:
  - enable Hebrew, Marathi and Urdu translations
  - pick up updated translations (#211074)
  - add dist tag


author: Nils Philippsen <nphilipp@redhat.com> 1.7.99.14-1
changelog:
  - put Etc/... timezones into "Non-geographic timezones" (#148025)
  - default to already set timezone on startup (#177815)


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - fix highlighted regions when leaving and entering the timeone map canvas
  - make timezone list a treeview
  - update timezone po source file


author: Nils Philippsen <nphilipp@redhat.com> 1.7.99.8-1
changelog:
  - reshow shaded map when reentering map widget from outside
  - clear status line when outside region area in zoomed mode


author: Nils Philippsen <nphilipp@redhat.com> 1.7.99.7-1
changelog:
  - only select region if pointer is inside region
  - replace aa-based shading to avoid aa-related deficiencies of GnomeCanvas
  - show shaded border around zoomed in region to zoom out without selecting a
    city


author: Nils Philippsen <nphilipp@redhat.com> 1.7.99.6-1
changelog:
  - fix zooming problems with enlarged window (#172982)
  - apply workaround by Alex Larsson to avoid hanging when clicking on Asia
    region (#172977)
  - add Middle America region, make Antarctica regions overlapping


author: Nils Philippsen <nphilipp@redhat.com> 1.7.99.2-1
changelog:
  - write comment about the ZONE parameter into /etc/sysconfig/clock (#123101)
  - handle comments when reading /etc/sysconfig/clock
  - consistently use spaces for indentation in timezoneBackend.py


author: Nils Philippsen <nphilipp@redhat.com> 1.7.99.0-1
changelog:
  - add and edit NTP servers inline in the list
  - always display clock left-to-right (#165109)
  - try to be smart about restrict lines when changing or deleting hosts
  - include *.pyo files (#165097)
  - don't remove *.pyc files in %preun because they're in the file list
  - don't include timetool symlink anymore
  - don't install firstboot module symlink, this is dealt with in the firstboot
    package for quite a while


author: Nils Philippsen <nphilipp@redhat.com> 1.7.18-1
changelog:
  - make desktop file translatable (#156792)
  - avoid DeprecationWarnings
  - use DESTDIR consistently (#156782)


author: Nils Philippsen <nphilipp@redhat.com> 1.7.16-2
changelog:
  - use True, False instead of gtk.TRUE, gtk.FALSE to avoid deprecation warnings
    (#153037, patch by Colin Charles)


author: Nils Philippsen <nphilipp@redhat.com> 1.7.9-1
changelog:
  - enable choosing which notebook page(s) to show (for firstboot, #133748)
  - some minor firstboot API changes, conflict with firstboot <= 1.3.26
  - some minor UI tweaks
  - remove pool.ntp.org from list of NTP server choices as system-config-date
    doesn't handle multi-IP machines really well ATM


author: Nils Philippsen <nphilipp@redhat.com> 1.7.5-1
changelog:
  - actually display time zone map (#131641)
  - put NTP stuff into own tab to better accommodate firstboot (#131314)
  - add accelerators to Date & Time tab


author: Brent Fox <bfox@redhat.com> 1.5.9-9
changelog:
  - Added mnemonics to widgets that didn't have them (bug #91026)
  - convert some timezone po files to utf-8 (bug #88461)


author: Brent Fox <bfox@redhat.com> 1.5.7-3
changelog:
  - better check on ntp status by looking at initscrip return code
  - sent ntp initscript output to /dev/null when calling os.system()


author: Brent Fox <bfox@redhat.com> 1.5.6-2
changelog:
  - handle missing ntpservers file
  - don't pass in parent, it breaks firstboot
  - handle busted ntp initscript


author: Brent Fox <bfox@redhat.com> 1.5.2-7
changelog:
  - Retrieve the only the first NTP server if there's more than one
  - Only modify the first server entry if there's more than one


author: Tammy Fox <tfox@redhat.com> 1.4-1
changelog:
  - Updated docs for gtk2 interface
  - Add note about security level and ntpd (bug #68039)
  - Move desktop file to /usr/share/applications only


author: Brent Fox <bfox@redhat.com> 1.3-4
changelog:
  - Remove some lingering references to dateconfig
  - Create symbolic link from dateconfig to redhat-config-date


author: Brent Fox <bfox@redhat.com> 1.3-1
changelog:
  - Rename dateconfig to redhat-config-date
  - Check to see if we can ping ntp server before starting ntpd


author: Brent Fox <bfox@redhat.com>
changelog:
  - Finished port to Python2.2/GTK2
  - Handle starting ntpd more gracefully
  - Made variable naming more consistent


author: Brent Fox <bfox@redhat.com>
changelog:
  - Replaced C code for timezone map with Python from anaconda
  - Remove timezonemapmodule from /usr/lib/dateconfig


author: Trond Eivind Glomsrød <teg@redhat.com> 0.7.4-6
changelog:
  - Fix some character sets for translations (#52851)
  - dateconfig.png isn't a config file, mark the config files as noreplace


author: Brent Fox <bfox@redhat.com>
changelog:
  - got starting and stopping of ntpd working
  - enabled detection of whether ntpd is currently running 
  - added msf to author list


author: Dan Walsh <dwalsh@redhat.com> 3.0.8-44
changelog:
  - Add policy.xml to devel
  - Dontaudit tmpreaper getattr on lost_found dir
  - Additional bluetooth file context
  - Allow dhcpc to transition to networkmanager


author: Dan Walsh <dwalsh@redhat.com> 3.0.8-34
changelog:
  - Allow automounter to create a sock file in /var/run/autofs
  - Fix corecmd_search_sbin to  be corecmd_search_bin


author: Dan Walsh <dwalsh@redhat.com> 3.0.8-33
changelog:
  - Allow cupsd_config_t to use usb_device_t
  - Dontaudit use of kernel_t
  - Fix creation of unconfined_gnome_home_t


author: Dan Walsh <dwalsh@redhat.com> 3.0.8-30
changelog:
  - Allow XServer to read /proc/self/cmdline
  - Fix unconfined cron jobs
  - Allow fetchmail to transition to procmail
  - Fixes for hald_mac
  - Allow system_mail to transition to exim
  - Allow tftpd to upload files
  - Allow xdm to manage unconfined_tmp
  - Allow udef to read alsa config
  - Fix xguest to be able to connect to sound port


author: Dan Walsh <dwalsh@redhat.com> 3.0.8-28
changelog:
  - Fixes for hald_mac 
  - Treat unconfined_home_dir_t as a home dir
  - dontaudit rhgb writes to fonts and root


author: Dan Walsh <dwalsh@redhat.com> 3.0.8-15
changelog:
  - Allow tmpreadper to read man_t
  - Allow racoon to bind to all nodes
  - Fixes for finger print reader


author: Dan Walsh <dwalsh@redhat.com> 3.0.8-7
changelog:
  - Allow cupsd_config_t to read/write usb_device_t
  - Support for finger print reader,
  - Many fixes for clvmd
  - dbus starting networkmanager


author: Dan Walsh <dwalsh@redhat.com> 3.0.2-7
changelog:
  - Begin adding policy to separate setsebool from semanage
  - Fix xserver.if definition to not break sepolgen.if


author: Dan Walsh <dwalsh@redhat.com> 2.6.4-5
changelog:
  - More fixes for alsactl
  - Transition from hal and modutils
  - Fixes for suspend resume.  
  	- insmod domtrans to alsactl
  	- insmod writes to hal log


author: Dan Walsh <dwalsh@redhat.com> 2.5.11-6
changelog:
  - Fix hald_acl_t to be able to getattr/setattr on usb devices
  - Dontaudit write to unconfined_pipes for load_policy


author: Dan Walsh <dwalsh@redhat.com> 2.5.4-2
changelog:
  - Revert Nemiver change
  - Set sudo as a corecmd so prelink will work,  remove sudoedit mapping, since this will not work, it does not transition.
  - Allow samba to execute useradd


author: Dan Walsh <dwalsh@redhat.com> 2.5.2-6
changelog:
  - Allow mozilla, evolution and thunderbird to read dev_random.
  Resolves: #227002
  - Allow spamd to connect to smtp port
  Resolves: #227184
  - Fixes to make ypxfr work
  Resolves: #227237


author: Dan Walsh <dwalsh@redhat.com> 2.5.2-4
changelog:
  - Fix spamassisin so crond can update spam files
  - Fixes to allow kpasswd to work
  - Fixes for bluetooth


author: Dan Walsh <dwalsh@redhat.com> 2.5.2-1
changelog:
  - Add ability to generate webadm_t policy
  - Lots of new interfaces for httpd
  - Allow sshd to login as unconfined_t


author: Dan Walsh <dwalsh@redhat.com> 2.5.1-1
changelog:
  - Allow prelink when run from rpm to create tmp files
  Resolves: #221865
  - Remove file_context for exportfs
  Resolves: #221181
  - Allow spamassassin to create ~/.spamassissin
  Resolves: #203290
  - Allow ssh access to the krb tickets
  - Allow sshd to change passwd
  - Stop newrole -l from working on non securetty
  Resolves: #200110
  - Fixes to run prelink in MLS machine
  Resolves: #221233
  - Allow spamassassin to read var_lib_t dir
  Resolves: #219234


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-16
changelog:
  - Allow semanage to exec it self.  Label genhomedircon as semanage_exec_t
  Resolves: #219421
  - Allow sysadm_lpr_t to manage other print spool jobs
  Resolves: #220080


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-3
changelog:
  - Allow login programs to polyinstatiate homedirs
  Resolves: #216184
  - Allow quotacheck to create database files
  Resolves: #212957


author: Dan Walsh <dwalsh@redhat.com> 2.4.6-1
changelog:
  - Dontaudit appending hal_var_lib files 
  Resolves: #217452
  Resolves: #217571
  Resolves: #217611
  Resolves: #217640
  Resolves: #217725


author: James Antill <james.antill@redhat.com> 2.4.2-6
changelog:
  - Fix policygentool specfile problem.
  - Allow apache to send signals to it's logging helpers.
  - Resolves: rhbz#212731


author: Dan Walsh <dwalsh@redhat.com> 2.3.16-9
changelog:
  - Remove bluetooth-helper transition
  - Add selinux_validate for semanage
  - Require new version of libsemanage


author: Dan Walsh <dwalsh@redhat.com> 2.3.9-4
changelog:
  - Set /usr/lib/ia32el/ia32x_loader to unconfined_execmem_exec_t for ia32 platform
  - Fix spec for /dev/adsp


author: Dan Walsh <dwalsh@redhat.com> 2.3.6-4
changelog:
  - Change allow_execstack to default to on, for RHEL5 Beta.  
    This is required because of a Java compiler problem.
    Hope to turn off for next beta


author: Dan Walsh <dwalsh@redhat.com> 2.3.3-11
changelog:
  - Added Paul Howarth patch to only load policy packages shipped 
    with this package
  - Allow pidof from initrc to ptrace higher level domains
  - Allow firstboot to communicate with hal via dbus


author: Dan Walsh <dwalsh@redhat.com> 2.3.3-3
changelog:
  - Allow prelink to read bin_t symlink
  - allow xfs to read random devices
  - Change gfs to support xattr


author: Dan Walsh <dwalsh@redhat.com> 2.2.32-2
changelog:
  - Add unconfined_mount_t
  - Allow privoxy to connect to httpd_cache
  - fix cups labeleing on /var/cache/cups


author: Dan Walsh <dwalsh@redhat.com> 2.2.29-6
changelog:
  - Allow secadm_t ability to relabel all files
  - Allow ftp to search xferlog_t directories
  - Allow mysql to communicate with ldap
  - Allow rsync to bind to rsync_port_t


author: Russell Coker <rcoker@redhat.com> 2.2.29-5
changelog:
  - Fixed mailman with Postfix #183928
  - Allowed semanage to create file_context files.
  - Allowed amanda_t to access inetd_t TCP sockets and allowed amanda_recover_t
    to bind to reserved ports.  #149030
  - Don't allow devpts_t to be associated with tmp_t.
  - Allow hald_t to stat all mountpoints.
  - Added boolean samba_share_nfs to allow smbd_t full access to NFS mounts.
    - Make mount run in mount_t domain from unconfined_t to prevent mislabeling of
    /etc/mtab.
  - Changed the file_contexts to not have a regex before the first ^/[a-z]/
    whenever possible, makes restorecon slightly faster.
  - Correct the label of /etc/named.caching-nameserver.conf
  - Now label /usr/src/kernels/.+/lib(/.*)? as usr_t instead of
    /usr/src(/.*)?/lib(/.*)? - I don't think we need anything else under /usr/src
    hit by this.
  - Granted xen access to /boot, allowed mounting on xend_var_lib_t, and allowed
    xenstored_t rw access to the xen device node.


author: Dan Walsh <dwalsh@redhat.com> 2.2.29-2
changelog:
  - Add mono dbus support
  - Lots of file_context fixes for textrel_shlib_t in FC5
  - Turn off execmem auditallow since they are filling log files


author: Dan Walsh <dwalsh@redhat.com> 2.2.23-17
changelog:
  - MLS Fixes
  	dmidecode needs mls_file_read_up
  - add ypxfr_t
  - run init needs access to nscd
  - udev needs setuid
  - another xen log file
  - Dontaudit mount getattr proc_kcore_t


author: Dan Walsh <dwalsh@redhat.com> 2.2.23-8
changelog:
  - Blkid changes
  - Allow udev access to usb_device_t
  - Fix post script to create targeted policy config file


author: Dan Walsh <dwalsh@redhat.com> 2.2.20-1
changelog:
  - Fix load_policy to work on MLS
  - Fix cron_rw_system_pipes for postfix_postdrop_t
  - Allow audotmount to run showmount


author: Dan Walsh <dwalsh@redhat.com> 2.2.19-2
changelog:
  - Fix swapon
  - allow httpd_sys_script_t to be entered via a shell
  - Allow httpd_sys_script_t to read eventpolfs


author: Dan Walsh <dwalsh@redhat.com> 2.2.2-1
changelog:
  - Update to upstream
  - Turn off execheap execstack for unconfined users
  - Add mono/wine policy to allow execheap and execstack for them
  - Add execheap for Xdm policy


author: Dan Walsh <dwalsh@redhat.com> 2.1.12-3
changelog:
  - Fix for procmail/spamassasin
  - Update to upstream
  - Add rules to allow rpcd to work with unlabeled_networks.


author: Dan Walsh <dwalsh@redhat.com> 2.1.6-13
changelog:
  - Add dri libs to textrel_shlib_t
  - Add system_r role for java
  - Add unconfined_exec_t for vncserver
  - Allow slapd to use kerberos


author: Dan Walsh <dwalsh@redhat.com> 2.1.3-1
changelog:
  - Turn back on execmem since we need it for java, firefox, ooffice
  - Allow gpm to stream socket to itself


author: Jeremy Katz <katzj@redhat.com> - 2.1.2-3
changelog:
  - fix requirements to be on the actual packages so that policy can get
    created properly at install time


author: Dan Walsh <dwalsh@redhat.com> 2.1.2-1
changelog:
  - Update to upstream 
  - Turn off allow_execmem and allow_execmod booleans
  - Add tcpd and automount policies


author: Dan Walsh <dwalsh@redhat.com> 2.1.1-3
changelog:
  - Add two new httpd booleans, turned off by default
  	* httpd_can_network_relay
  	* httpd_can_network_connect_db


