NAME
    lzop - compress or expand files

ABSTRACT
    lzop is a file compressor very similar to gzip. lzop favors
    speed over compression ratio.

SYNOPSIS
    lzop [ *command* ] [ *options* ] [ *filename* ... ]

    lzop [-dxlthIVL19] [-qvcfFnNkU] [-o *file*] [-p[*path*]] [-S
    *suffix*] [*filename* ...]

DESCRIPTION
    lzop reduces the size of the named files. Whenever possible,
    each file is compressed into one with the extension .lzo, while
    keeping the same ownership modes, access and modification times.
    If no files are specified, or if a file name is "-", lzop tries
    to compress the standard input to the standard output. lzop will
    only attempt to compress regular files. In particular, it will
    ignore directories and symbolic links.

    If the compressed file name is too long for its file system,
    lzop truncates it.

    Compressed files can be restored to their original form using
    lzop -d. lzop -d takes a list of files on its command line and
    decompresses each file whose name ends with .lzo and which
    begins with the correct magic number to an uncompressed file
    without the original extension. lzop -d also recognizes the
    special extension .tzo as shorthand for .tar.lzo. When
    compressing, lzop uses the .tzo extension if necessary instead
    of truncating a file with a .tar extension.

    lzop stores the original file name, mode and time stamp in the
    compressed file. These can be used when decompressing the file
    with the -d option. This is useful when the compressed file name
    was truncated or when the time stamp was not preserved after a
    file transfer.

    lzop preserves the ownership, mode and time stamp of files when
    compressing. When decompressing lzop restores the mode and time
    stamp if present in the compressed files. See the options -n, -
    N, --no-mode and --no-time for more information.

    lzop always keeps original files unchanged unless you use the
    option -U.

    lzop uses the *LZO data compression library* for compression
    services. The amount of compression obtained depends on the size
    of the input and the distribution of common substrings.
    Typically, text such as source code or English is compressed
    into 40-50% of the original size, and large files usually
    compress much better than small ones. Compression and
    decompression speed is generally much faster than that achieved
    by gzip, but compression ratio is worse.

  COMPRESSION LEVELS

    lzop offers the following compression levels of the LZO1X
    algorithm:

    -3  the default level offers pretty fast compression. Note that -2,
        -3, -4, -5 and -6 are currently all equivalent - this may
        change in a future release.

    -1, --fast
        can be even a little bit faster in some cases - but most
        times you won't notice the difference

    -7, -8, -9, --best
        these compression levels are mainly intended for generating
        pre-compressed data - especially -9 can be somewhat slow

    Decompression is *very* fast for all compression levels.

MAIN COMMAND
    If no other command is given then lzop defaults to compression.

    -#, --fast, --best
        Regulate the speed of compression using the specified digit
        #, where -1 or --fast indicates the fastest compression
        method (less compression) and -9 or --best indicates the
        slowest compression method (best compression). The default
        compression level is -3.

    -d, --decompress, --uncompress
        Decompress. Each file will be placed into same the directory
        as the compressed file.

    -x, --extract
        Extract compressed files to the current working directory.
        This is the same as `-dNp'.

    -t, --test
        Test. Check the compressed file integrity.

    -l, --list
        For each compressed file, list the following fields:

          method: compression method
          compressed: size of the compressed file
          uncompr.: size of the uncompressed file
          ratio: compression ratio
          uncompressed_name: name of the uncompressed file

        In combination with the --verbose option, the following
        fields are also displayed:

          date & time: time stamp for the uncompressed file

        With --name, the uncompressed name, date and time are those
        stored within the compress file if present.

        With --verbose, the size totals and compression ratio for
        all files is also displayed. With --quiet, the title and
        totals lines are not displayed.

        Note that lzop defines compression ratio as compressed_size
        / uncompressed_size.

    --ls, --ls=*FLAGS*
        List each compressed file in a format similar to ls -ln.

        The following flags are currently honoured: F Append a `*'
        for executable files. G Inhibit display of group
        information. Q Enclose file names in double quotes.

    --info
        For each compressed file, list the internal header fields.

    -I, --sysinfo
        Display information about the system and quit.

    -L, --license
        Display the lzop license and quit.

    -h, -H, --help
        Display a help screen and quit.

    -V  Version. Display the version number and compilation options then
        quit.

    --version
        Version. Display the version number then quit.

    Note that -t has priority over -d, -l over -t, and so on.

OPTIONS
    -c, --stdout, --to-stdout
        Write output on standard output. If there are several input
        files, the output consists of a sequence of independently
        (de)compressed members. To obtain better compression,
        concatenate all input files before compressing them.

    -o *FILE*, --output=*FILE*
        Write output to the file *FILE*. If there are several input
        files, the output consists of a sequence of independently
        (de)compressed members.

    -p, -p*DIR*, --path=*DIR*
        Write output files into the directory *DIR* instead of the
        directory determined by the input file. If *DIR* is omitted,
        then write to the current working directory.

    -f, --force
        Force lzop to

         - overwrite existing files
         - compress from stdin even if it seems a terminal
         - compress to stdout even if it seems a terminal
         - allow option -c in combination with -U

        Using -f two or more times forces things like

         - compress files that already have a .lzo suffix
         - decompress files that do not have a valid suffix
         - try to handle compressed files with unknown header flags

        Use with care.

    -F, --no-checksum
        Do not store or verify a checksum of the uncompressed file
        when compressing or decompressing. This speeds up the
        operation of lzop a little bit (especially when
        decompressing), but as unnoticed data corruption can happen
        in case of damaged compressed files the usage of this option
        is not generally recommended. Also, a checksum is always
        stored when compressing with one of the slow compression
        levels (-7, -8 or -9).

    -n, --no-name
        When decompressing, do not restore the original file name if
        present (remove only the lzop suffix from the compressed
        file name). This option is the default under UNIX.

    -N, --name
        When decompressing, restore the original file name if
        present. This option is useful on systems which have a limit
        on file name length. If the original name saved in the
        compressed file is not suitable for its file system, a new
        name is constructed from the original one to make it legal.
        This option is the default under DOS, Windows and OS/2.

    --no-mode
        When decompressing, do not restore the original mode
        (permissions) saved in the compressed file.

    --no-time
        When decompressing, do not restore the original time stamp
        saved in the compressed file.

    -S *.suf*, --suffix=*.suf*
        Use suffix *.suf* instead of *.lzo*. The suffix must not
        contain multiple dots and special characters like '+' or
        '*', and suffixes other than *.lzo* should be avoided to
        avoid confusion when files are transferred to other systems.

    -k, --keep
        Do not delete input files. This is the default.

    -U, --unlink, --delete
        Delete input files after succesfull compression or
        decompression. Beware. Use this option to make lzop behave
        like gzip. Note that -k overrides -U.

    --no-stdin
        Do not try to read standard input. This option is necessary
        in cron jobs (which do not have a controlling terminal). A
        file name "-" will still override this option.

    --no-warn
        Suppress all warnings.

    --ignore-warn
        Suppress all warnings, and never exit with exit status 2.

    -q, --quiet, --silent
        Suppress all warnings and decrease the verbosity of some
        commands like --list or --test.

    -v, --verbose
        Verbose. Display the name for each file compressed or
        decompressed. Multiple -v can be used to increase the
        verbosity of some commands like --list or --test.

    --  Specifies that this is the end of the options. Any file name
        after -- will not be interpreted as an option even if it
        starts with a hyphen.

OTHER OPTIONS
    --no-color
        Do not use any color escape sequences.

    --mono
        Assume a mono ANSI terminal. This is the default under UNIX.

    --color
        Assume a color ANSI terminal or try full-screen access. This
        is the default under DOS and in a Linux virtual console.

    --intro
        Try to display that nice intro sequence then quit. Needs
        full-screen access.

    --filter=*NUMBER*
        Rarely useful. Preprocess data with a special "multimedia"
        filter before compressing in order to improve compression
        ratio. *NUMBER* must be a decimal number from 1 to 16,
        inclusive. Using a filter slows down both compression and
        decompression quite a bit, and the compression ratio usually
        doesn't improve much either... More effective filters may be
        added in the future, though.

        You can try --filter=1 with data like 8-bit sound samples, -
        -filter=2 with 16-bit samples or depth-16 images, etc.

        Un-filtering during decompression is handled automatically.

    -C, --checksum
        Deprecated. Only for compatibility with old versions as lzop
        now uses a checksum by default. This option may get removed
        in a future release.

ADVANCED USAGE
    lzop allows you to deal with your files in many flexible ways.
    Here are some usage examples:

    single file mode: individually (de)compress each file
      create
        lzop a.c             -> create a.c.lzo
        lzop a.c b.c         -> create a.c.lzo & b.c.lzo
        lzop -U a.c b.c      -> create a.c.lzo & b.c.lzo and delete a.c & b.c
        lzop *.c

      extract
        lzop -d a.c.lzo      -> restore a.c
        lzop -df a.c.lzo     -> restore a.c, overwrite if already exists
        lzop -d *.lzo

      list
        lzop -l a.c.lzo
        lzop -l *.lzo
        lzop -lv *.lzo       -> be verbose

      test
        lzop -t a.c.lzo
        lzop -tq *.lzo       -> be quiet

    pipe mode: (de)compress from stdin to stdout
      create
        lzop < a.c > y.lzo
        cat a.c | lzop > y.lzo
        tar -cf - *.c | lzop > y.tar.lzo     -> create a compressed tar file

      extract
        lzop -d < y.lzo > a.c
        lzop -d < y.tar.lzo | tar -xvf -     -> extract a tar file
        lzop -d < y.tar.lzo | tar -tvf -     -> list a tar file

      list
        lzop -l < y.lzo
        cat y.lzo | lzop -l

      test
        lzop -t < y.lzo
        cat y.lzo | lzop -t

    stdout mode: (de)compress to stdout
      create
        lzop -c a.c > y.lzo

      extract
        lzop -dc y.lzo > a.c
        lzop -dc y.tar.lzo | tar -tvf -      -> list a tar file

    archive mode: compress/extract multiple files into a single archive file
      create
        lzop a.c b.c -o sources.lzo          -> create an archive
        lzop -c *.c > sources.lzo            -> another way to create an archive
        lzop -c *.h >> sources.lzo           -> add files to archive

      extract
        lzop -dN sources.lzo
        lzop -x ../src/sources.lzo           -> extract to current directory
        lzop -x -p/tmp < ../src/sources.lzo  -> extract to /tmp directory

      list
        lzop -lNv sources.lzo

      test
        lzop -t sources.lzo
        lzop -tvv sources.lzo                -> be very verbose

    If you wish to create a single archive file with multiple
    members so that members can later be extracted independently,
    you should prefer a full-featured archiver such as tar or zip.
    The latest version of GNU tar supports the --use-compress-
    program=lzop option to invoke lzop transparently. lzop is
    designed as a complement to tar, not as a replacement.

ENVIRONMENT
    The environment variable LZOP can hold a set of default options
    for lzop. These options are interpreted first and can be
    overwritten by explicit command line parameters. For example:

        for sh/ksh/zsh:    LZOP="-1v --name"; export LZOP
        for csh/tcsh:      setenv LZOP "-1v --name"
        for DOS:           set LZOP=-1v --name

    On Vax/VMS, the name of the environment variable is LZOP_OPT, to
    avoid a conflict with the symbol set for invocation of the
    program.

    Note that not all options are valid in the environment variable
    - lzop will tell you.

SEE ALSO
    gzip(1), tar(1), bzip2(1)

    Precompiled binaries for some platforms should be available from
    the lzop home page soon.

        see http://wildsau.idv.uni-linz.ac.at/mfx/lzop.html

    lzop uses the LZO data compression library for compression
    services.

        see http://wildsau.idv.uni-linz.ac.at/mfx/lzo.html

DIAGNOSTICS
    Exit status is normally 0; if an error occurs, exit status is 1.
    If a warning occurs, exit status is 2.

    lzop's diagnostics are intended to be self-explanatory.

BUGS
    Please report all bugs immediately to the author.

AUTHOR
    markus.oberhumer@jk.uni-linz.ac.at

COPYRIGHT
    lzop and the LZO library are Copyright (C) 1996, 1997, 1998 by
    Markus Franz Xaver Johannes Oberhumer.

    lzop and the LZO library are distributed under the terms of the
    GNU General Public License (GPL).

