Package: glut-dev
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: python-elisp
Status: purge ok not-installed
Priority: optional
Section: interpreters

Package: xserver-i128
Status: purge ok not-installed
Priority: optional
Section: x11

Package: ldso
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 382
Maintainer: David Engel <david@debian.org>
Source: ld.so
Version: 1.9.5-1
Provides: libdl1
Description: The Linux dynamic linker, library and utilities.
 The dynamic linker provides the user-level support for loading and
 linking DLL and ELF shared libraries.  It is required by any program
 that uses shared libraries, which is just about all of them.
 .
 WARNING: Do NOT downgrade this package to version 1.8.x or earlier.
 Doing so may leave your system in an unusable state.

Package: libc6
Status: install ok installed
Priority: required
Section: base
Installed-Size: 1403
Maintainer: Helmut Geyer <Helmut.Geyer@iwr.uni-heidelberg.de>
Source: glibc
Version: 2.0.4-1
Pre-Depends: ldso (>= 1.8.10-1)
Conflicts: libpthread0 (<= 0.5-10)
Description: The GNU C library version 2 (run-time files).
 Includes shared libraries needed to run programs.

Package: libc5
Status: install ok installed
Priority: required
Section: base
Installed-Size: 660
Maintainer: Helmut Geyer <Helmut.Geyer@iwr.uni-heidelberg.de>
Source: libc
Version: 5.4.33-7
Depends: libc6 (>= 2.0.4-1)
Pre-Depends: ldso (>= 1.7.14-2)
Conflicts: libc5-dev, wg15-locale, locales (<= 2.0.4-1)
Description: The Linux C library version 5 (run-time libraries).
 Includes shared libraries needed to run programs built with libc 5.
 These libraries are modified to make them work better in a libc6
 environment.

Package: wdiff
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 58
Maintainer: Santiago Vila <sanvila@ctv.es>
Version: 0.5-3
Depends: libc5 (>= 5.4.0-0), ncurses3.0
Description: The GNU wdiff utility. Compares two files word by word.
 `wdiff' is a front-end to GNU `diff'.  It compares two files, finding
 which words have been deleted or added to the first in order to create
 the second.  It has many output formats and interacts well with
 terminals and pagers (notably with `less').  `wdiff' is particularily
 useful when two texts differ only by a few words and paragraphs have
 been refilled.

Package: ncurses3.0
Status: install ok installed
Priority: required
Section: base
Installed-Size: 300
Maintainer: Galen Hazelwood <galenh@micron.net>
Source: oldncurses
Version: 1.9.9e-2
Conflicts: ncurses
Description: Old libc5 curses - shared libraries
 This package contains the shared libraries necessary to run programs
 compiled with the libc5 ncurses.  It is provided to support older
 binaries which may need it.

Package: mbr
Status: install ok installed
Priority: required
Section: base
Installed-Size: 16
Maintainer: Bruce Perens <Bruce@Pixar.com>
Version: 1.0.0-5
Description: Master Boot Record for IBM-PC compatible computers.
 This is used in booting Linux from the hard disk.
 The MBR runs first, then transfers control to LILO, which transfers
 control to the Linux kernel.

Package: csh
Status: install ok installed
Priority: optional
Section: shells
Installed-Size: 279
Maintainer: Dominik Kubla <dominik@debian.org>
Version: 5.26-8
Provides: c-shell
Depends: libc5 (>= 5.2.18)
Conflicts: tcsh (<= 6.06-3)
Description: Shell with C-like syntax, standard login shell on BSD systems.
 The C shell was originally written at UCB to overcome limitations in the
 Bourne shell.  Its flexibility and comfort (at that time) quickly made it
 the shell of choice until more advanced shells like ksh, bash, zsh or
 tcsh appeared. Most of the latter incorporate features original to csh.
 .
 This package is provided for the use as script interpreter. If you want
 to use a csh as login shell it is recommended that you use the tcsh.

Package: tcsh
Status: install ok installed
Priority: standard
Section: shells
Installed-Size: 379
Maintainer: Vadim Vygonets <vadik@cs.huji.ac.il>
Version: 6.07.02-3
Provides: c-shell
Depends: libc6, ncurses3.0
Conffiles:
 /etc/csh.cshrc 4bba8e8686be59f6149afdb83c6fdc4b
 /etc/csh.login 9fff73775e0a647e45d4a83917549d95
 /etc/csh.logout ec0e445bb90c4962bb36da0b684acbd0
 /etc/skel/.cshrc 7fce70d11cdec7657da1465cedf43249
 /etc/skel/.alias 0d1365b400174cd3e34149af5a1e5c30
Description: An enhanced version of the Berkeley C shell.
 tcsh is an enhanced but completely compatible version of
 the Berkeley UNIX C shell, csh(1). It is a command language
 interpreter usable both as an interactive login
 shell and a shell script command processor. It includes a
 command-line editor, programmable word completion,
 spelling correction, a history mechanism, job control
 and a C-like syntax.

Package: sysvinit
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 172
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Version: 2.71-2
Replaces: last, bsdutils (<= 2.0-2)
Pre-Depends: libc5 (>= 5.4.0-0)
Conflicts: last
Conffiles:
 /etc/init.d/boot 6043411a35205ed214b8376d1703c543
 /etc/init.d/functions 0c0917923fade2b31aeba7ccff507b9d
 /etc/init.d/halt 68bc1f783330489603af45f7b2607220
 /etc/init.d/rc 60e77848ea246f436d6e15ff4c8aa6b0
 /etc/init.d/reboot 8a35f8a6172ce83901ec8959cfa00ded
 /etc/init.d/single 79ab06e4cb357207e0a2e0e12281478f
 /etc/init.d/skeleton a50a15ee6450c0d567054052af8d7bfc
Description: System-V like init.
 Init is the first program to run after your system is booted, and
 continues to run as process number 1 until your system halts. Init's
 job is to start other programs that are essential to the operation of
 your system. All processes are descended from init. For more information,
 see the manual page init(8).

Package: shellutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 605
Maintainer: Galen Hazelwood <galenh@micron.net>
Version: 1.16-5
Replaces: bsdutils (<= 3.0-2)
Pre-Depends: libc6
Description: The GNU shell programming utilities.
 The utilities: basename chroot date dirname echo env expr factor false groups
 id logname nice nohup pathchk printenv printf pwd seq sleep stty su tee test
 true tty uname users who whoami yes.

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 63
Maintainer: Austin Donnelly <and1000@debian.org>
Version: 3.3
Depends: libc5 (>= 5.4.0-0), sysvinit (>= 2.59-2), shellutils (>= 1.15-3)
Recommends: bsdmainutils
Description: Basic utilities from 4.4BSD-Lite.
 This package contains the bare minimum number of BSD utilities needed
 to boot a Debian system.  You should probably also install
 bsdmainutils to get the remaining standard BSD utilities.
 .
 Included are: kill, logger, renice, script, wall

Package: netbase
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 635
Maintainer: Peter Tobias <tobias@et-inf.fho-emden.de>
Version: 3.04-1
Replaces: netstd
Depends: libc6
Recommends: netstd (>= 3.00)
Conffiles:
 /etc/init.d/netbase bfbc4867d65c9b905b74ab540216b2c8
 /etc/cron.daily/netbase 62985b37d2811951bcda3888e11666c6
 /etc/gateways a7503b386fe803313210e201fa02e184
 /etc/protocols ffeb999437e9e69e03aa32991dfa487f
 /etc/services 26c295e11b67ed4879be047091c5d049
 /etc/hosts.allow d4cef32cd97869ea3ce894302dcfb263
 /etc/hosts.deny 688ab5a561c1a01a8e5b533aca29442c
 /etc/rpc 2bdeed693cced85d79d194c1071070ff
Description: Basic TCP/IP networking binaries
 In order to make use of the network you need a few tools to
 configure it. This package contains all the necessary tools
 to configure the networking interfaces, to setup the routing
 tables and to start other services using the inetd server.

Package: libreadlineg2
Status: install ok installed
Priority: required
Section: base
Installed-Size: 164
Maintainer: Guy Maor <maor@debian.org>
Source: bash (2.01-2)
Version: 2.1-4
Depends: libc6, ncurses3.4
Conflicts: libreadline2 (<< 2.1-2.1)
Description: GNU readline and history libraries, run-time libraries. [libc6]
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: cpp
Status: install ok installed
Priority: standard
Section: interpreters
Installed-Size: 137
Maintainer: Galen Hazelwood <galenh@micron.net>
Source: gcc
Version: 2.7.2.2-7
Depends: libc6
Description: The GNU C preprocessor.
 The GNU C preprocessor is required by some utilities that use it for
 macro substitutions. This package has been separated from gcc for
 the benefit of those who require the preprocessor but not the
 compiler.

Package: libbfd2.8.1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 292
Maintainer: Galen Hazelwood <galenh@micron.net>
Source: binutils
Version: 2.8.1-2
Description: The GNU Binary File Descriptor library (run-time).
 BFD is a package which allows applications to use the same routines
 to operate on object files whatever the object file format.  This package
 includes the shared library, used primarily by GNU binutils, but may be
 required by other packages as well.

Package: libbfd2.8.1-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 613
Maintainer: Galen Hazelwood <galenh@micron.net>
Source: binutils
Version: 2.8.1-2
Provides: libbfd-dev
Depends: libbfd2.8.1
Conflicts: libbfd-dev
Description: The GNU Binary File Descriptor library (development).
 BFD is a package which allows applications to use the same routines
 to operate on object files whatever the object file format.  This package
 includes header files and static libraries necessary to build programs
 which use this library.

Package: binutils
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 1556
Maintainer: Galen Hazelwood <galenh@micron.net>
Version: 2.8.1-2
Provides: elf-binutils
Depends: libbfd2.8.1, libc6
Conflicts: gas, elf-binutils
Description: The GNU assembler, linker and binary utilities.
 The programs in this package are used to assemble, link and manipulate
 binary and object files.  They may be used in conjunction with a compiler
 and various libraries to build programs for Linux.

Package: gcc
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 4954
Maintainer: Galen Hazelwood <galenh@micron.net>
Version: 2.7.2.2-7
Depends: libc6, cpp (>= 2.7.2.2-1), cpp (<< 2.7.2.3), binutils (>= 2.8-1)
Recommends: libc-dev
Conflicts: libc5-dev
Description: The GNU C compiler.
 The GNU C compiler is a fairly portable optimizing compiler that
 supports multiple languages.  It includes (runtime) support for C,
 C++, and Objective C (support for Objective C was donated by NeXT).

Package: libc6-dev
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 4668
Maintainer: Helmut Geyer <Helmut.Geyer@iwr.uni-heidelberg.de>
Source: glibc
Version: 2.0.4-1
Replaces: ldso (<< 1.9.0-0), man-db (<= 2.3.10-37), gettext (<= 0.10.26-1), ppp (<= 2.2.0f-24)
Provides: libc-dev
Depends: libc6 (= 2.0.4-1), gcc (>= 2.7.2.2-2)
Conflicts: libc-dev, libdl1-dev, libdb1-dev, libgdbm1-dev, libpthread0-dev
Description: The GNU C library version 2 (development files).
 Includes libc headers, kernel headers and static libraries.

Package: libreadlineg2-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 332
Maintainer: Guy Maor <maor@debian.org>
Source: bash (2.01-2)
Version: 2.1-4
Provides: libreadline-dev
Depends: libreadlineg2 (= 2.1-4), libc6, ncurses3.4, libc6-dev
Conflicts: libreadline-dev
Description: GNU readline and history libraries, development files. [libc6]
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libreadlineg2-dbg
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 651
Maintainer: Guy Maor <maor@debian.org>
Source: bash (2.01-2)
Version: 2.1-4
Provides: libreadline-dbg
Depends: libreadlineg2-dev (= 2.1-4)
Conflicts: libreadline-dbg
Description: GNU readline and history libraries, debugging libraries. [libc6]
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 85
Maintainer: Wichert Akkerman <wakkerma@wi.leidenuniv.nl>
Version: 2.0-12
Pre-Depends: libc5 (>= 5.4.0-0)
Description: GNU grep, egrep and fgrep.
 The GNU family of grep utillities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 682
Maintainer: Guy Maor <maor@debian.org>
Version: 2.01-2
Pre-Depends: libc6, ncurses3.4, libreadlineg2 (>= 2.01-1)
Conffiles:
 /etc/profile 6c7ff6d851603e33d621d589edfd0893
 /etc/skel/.bash_profile 7fb37112e03e428ceb7755b36bd08a42
 /etc/skel/.bashrc 118f882acfaf472e6a352b1baaf5db87
Description: The GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE Posix Shell and Tools specification (IEEE Working Group 1003.2).

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 47
Maintainer: Wichert Akkerman <wakkerma@wi.leidenuniv.nl>
Version: 2.05-15
Pre-Depends: libc6
Description: The GNU sed stream editor.
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.

Package: bug
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 24
Maintainer: Nicols Lichtmaier <nick@feedback.com.ar>
Version: 2.95
Replaces: debmake
Depends: bash (>= 2.0-1), grep, perl, sed
Recommends: mail-transport-agent
Description: Bug Reporting Tool interfacing with the Bug Tracking System
 A script to ease the reporting of bugs. Automatically figures out version
 numbers of the package reported and all depending packages. Adds configfiles
 etc to the bugreport.

Package: mime-support
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 128
Maintainer: Brian White <bcwhite@verisim.com>
Version: 2.12-1
Depends: perl | perl-base
Conffiles:
 /etc/mime.types c90cfbce7afc82daf3ed0bb9e49b582c
 /etc/mailcap 654169c0177e4a536e478e71f7a4e51a
 /var/lib/mime/mime-db d41d8cd98f00b204e9800998ecf8427e
Description: MIME files 'mime.types' & 'mailcap', and support programs
 As these files can be used by all MIME compliant programs, they
 have been moved into their own package that others can depend upon.
 .
 Other packages add themselves as viewers/editors/composers/etc by
 using the provided "install-mime" program.

Package: perl-debug
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 4010
Maintainer: Darren Stalder <torin@daft.com>
Source: perl
Version: 5.004.02-1
Depends: perl (= 5.004.02-1)
Description: Allow debugging perl scripts (and perl).
 Truly extensive and exhaustive output is possible with different settings.

Package: perl-curses
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 130
Maintainer: John Goerzen <jgoerzen@complete.org>
Version: 1.01-1
Depends: perl (>= 5.003), libc5 (>= 5.4.0-0), ncurses3.0
Description: Curses interface for Perl
 perl-curses (the Curses module from CPAN) will let you
 use the ncurses/curses terminal screen manipulation
 routines from Perl programs.

Package: libgdbmg1-dev
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 102
Maintainer: Mark Eichin <eichin@kitten.gen.ma.us>
Source: libgdbmg
Version: 1.7.3-22
Depends: libgdbmg1, libc6-dev
Conflicts: libgdbm1-dev
Description: GNU dbm database routines (development files) [libc6 version]
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 This library is no longer supported by the FSF, and hasn't been worked on
 in several years -- for new applications, please consider libdb instead, and
 also consider migrating old applications, see /usr/doc/libgdbmg/MIGRATE.

Package: libgdbmg1
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 29
Maintainer: Mark Eichin <eichin@kitten.gen.ma.us>
Source: libgdbmg
Version: 1.7.3-22
Provides: elf-libgdbm
Depends: libc6
Conflicts: libgdbm1 (<= 1.7.3-19)
Description: GNU dbm database routines (runtime version). [libc6 version]
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).

Package: perl
Status: install ok installed
Priority: important
Section: interpreters
Installed-Size: 7190
Maintainer: Darren Stalder <torin@daft.com>
Version: 5.004.02-1
Replaces: io
Provides: io
Pre-Depends: libc6, libgdbmg1
Suggests: perl-suid, perl-debug
Conflicts: io
Description: Larry Wall's Practical Extracting and Report Language.
 An interpreted scripting language, known among some as "Unix's
 Swiss Army Chainsaw".
 .
 Perl is optimized for scanning arbitrary text files and system
 administration. It has built-in extended regular expression matching
 and replacement, a dataflow mechanism to improve security with
 setuid scripts and is extendible via modules that can interface
 to C libraries.

Package: libdb1-dev
Status: purge ok not-installed
Priority: standard
Section: devel

Package: libdb1
Status: install ok installed
Priority: standard
Section: base
Installed-Size: 65
Maintainer: Mark Eichin <eichin@kitten.gen.ma.us>
Source: libdb
Version: 1.85.4-4
Depends: libc5 (>= 5.4.0-0)
Description: The Berkeley database routines (runtime version
 libdb is a library for manipulating database files, developed at Berkeley.
 .
 It supports three kinds of file formats:
  * btree. A representation of a sorted, balanced tree structure.
  * hashed. An extensible, dynamic hashing scheme.
  * UNIX file oriented. A byte stream file with fixed our variable length
    records

Package: fortunes
Status: install ok installed
Priority: optional
Section: games
Installed-Size: 3401
Maintainer: Helmut Geyer <Helmut.Geyer@iwr.uni-heidelberg.de>
Source: fortune-mod
Version: 9510-4
Depends: fortune-mod
Description: Datafiles containing fortune cookies
 There are far over 15000 different 'fortune cookies' in this package,
 some of them of offensive character. These (or at least those clearly
 labelled so) can be removed on installation, if they are not wanted.
 You'll need the fortune-mod package to display the cookies.

Package: bsdmainutils
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 279
Maintainer: Austin Donnelly <and1000@debian.org>
Version: 3.4
Replaces: bsdutils (<< 3.0-0)
Depends: libc5 (>= 5.4.0-0), libdb1 (>= 1.85.2-8), ncurses3.0, bsdutils (>= 3.0-0)
Suggests: word-list
Conffiles:
 /etc/cron.daily/calendar b0483b6fbe110ded045214a91f4b05b1
Description: More utilities from 4.4BSD-Lite.
 This package contains lots of small programs many people expect to find
 when they use a BSD-style Unix system.
 .
 Included are: banner, cal, calendar, col, colcrt, colrm, column, from,
 hexdump, look, lorder, tsort, ul, vacation, whois, write.

Package: lilo
Status: install ok installed
Priority: important
Section: base
Installed-Size: 212
Maintainer: Bernd Eckenfels <ecki@debian.org>
Version: 19-2
Depends: mbr
Description: LInux LOader - Loads Linux from the hard disk without a floppy.
 This program will set up your hard disk to boot Linux.

Package: metamail
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 328
Maintainer: Herbert Xu <herbert@debian.org>
Version: 2.7-22
Depends: mime-support (>= 2.02-1), libc6, ncurses3.4
Recommends: sharutils
Description: An implementation of MIME.
 Metamail is an implementation of MIME (Multi-purpose Internet Mail
 Extensions), a proposed standard for multimedia electronic mail on
 the Internet.
 .
 Metamail is configurable and extensible via the "mailcap" mechanism
 described in an informational RFC that is a companion to the MIME
 document.  Metamail can be used to turn virtually any mail reader
 program into a multimedia mail reader.  For information about how
 to change mail readers so that they can use Metamail, please read
 the file `/usr/doc/metamail/mailers.txt.gz'.

Package: libjpeg-progs
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 108
Maintainer: A.W.P. Guy <awpguy@acs.ucalgary.ca>
Source: libjpeg
Version: 6a-4a
Depends: libc6, libjpeg6a
Description: The Independent JPEG Group's jpeg library (programs).
  cjpeg/djpeg: convert to/from the jpeg file format
  rdjpgcom/wrjpgcom: read/write comments in jpeg files
  jpegtran: translate between jpeg formats

Package: libjpeg6a
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 137
Maintainer: A.W.P. Guy <awpguy@acs.ucalgary.ca>
Source: libjpeg
Version: 6a-4a
Replaces: libgr, libgr-dev, libjpeg
Description: The Independent JPEG Group's jpeg library (runtime).
 This package contains the shared librarys.

Package: libjpeg-dev
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 340
Maintainer: A.W.P. Guy <awpguy@acs.ucalgary.ca>
Source: libjpeg
Version: 6a-4a
Replaces: libgr-dev, libjpeg
Depends: libjpeg6a (= 6a-4a)
Conflicts: libjpeg6a-dev
Description: The Independent JPEG Group's jpeg library (devel).
 This package contains the development librarys and the documentation.

Package: libpcap0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 81
Maintainer: Peter Tobias <tobias@et-inf.fho-emden.de>
Source: libpcap
Version: 0.4a6-1
Depends: libc6
Conflicts: tcpdump (<< 3.4)
Description: System interface for user-level packet capture.
 libpcap provides a portable framework for low-level network monitoring.
 Applications include network statistics collection, security monitoring,
 network debugging, etc.  Since almost every system vendor provides a
 different interface for packet capture, and since we've developed
 several tools that require this functionality, we've created this
 system-independent API to ease in porting and to alleviate the need
 for several system-dependent packet capture modules in each application.

Package: libpng0-dev
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 255
Maintainer: Philippe Troin <phil@fifi.org>
Source: libpng0
Version: 0.96-2
Replaces: libpng1-dev
Provides: libpng-dev
Depends: libpng0 (= 0.96-2)
Conflicts: libpng-dev, libpng1-dev
Description: PNG library - development
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.

Package: libpng0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 140
Maintainer: Philippe Troin <phil@fifi.org>
Version: 0.96-2
Depends: libc5 (>= 5.4.0-0)
Description: PNG library - runtime
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.

Package: libtiff3
Status: install ok installed
Priority: optional
Section: libs
Maintainer: Guy Maor <maor@debian.org>
Source: libtiff3
Version: 3.4beta035-1
Replaces: libgr
Depends: zlib1, libjpeg6a
Suggests: libtiff3-gif
Description: tiff library - runtime and tools
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  Included is the
 shared library, tools for converting TIFF images to and from other
 formats, and tools for doing simple manipulations of TIFF images.

Package: libtiff3-gif
Status: install ok installed
Priority: optional
Section: non-free/graphics
Maintainer: Guy Maor <maor@debian.org>
Source: libtiff3
Version: 3.4beta035-1
Replaces: libgr
Depends: libtiff3
Description: tiff library - gif to tiff conversion tool
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  Included is
 gif2tiff, a program for converting GIF images to TIFF images.
 .
 Unisys has placed restrictions on the distribution of this package.

Package: xlib6-dev
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 3421
Maintainer: Mark W. Eichin <eichin@kitten.gen.ma.us>
Source: xfree86
Version: 3.3-4
Replaces: xdevel
Provides: xdevel
Depends: xlib6 (>= 3.3-1)
Suggests: xmanpages
Conflicts: xdevel
Description: Include files and libraries for X client development
 This package provides the standard set of include files for X, and
 some non-shared libraries required for X client development. You
 only need to install it if you intend to compile X clients yourself.
 .
 This package only provides statically linked libraries if there is
 no dynamically-linked version available. For statically linked
 versions of the libraries in the xlib6 package, see the xslib package.

Package: xlib6
Status: install ok installed
Priority: standard
Section: x11
Installed-Size: 1695
Maintainer: Mark W. Eichin <eichin@kitten.gen.ma.us>
Source: xfree86
Version: 3.3-4
Replaces: elf-x11r6lib, xlib
Provides: elf-x11r6lib
Depends: libc5 (>= 5.4.0-0)
Conflicts: elf-x11r6lib, xlib
Description: Shared libraries required by X clients
 This package provides shared libraries required by X clients.
 You need to install it if you intend to run any X clients locally.
 You do not need to install it if you only intend to run an X
 server locally, and run all your clients remotely.
 .
 If you intend to use X, but do not know the difference between a
 server and a client then you should install this package.

Package: zlib1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 53
Maintainer: Michael Alan Dorman <mdorman@debian.org>
Source: zlib
Version: 1:1.0.4-7
Depends: libc5 (>= 5.4.0-0)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and pkzip.  This package includes the shared library.

Package: xv
Status: install ok installed
Priority: optional
Section: non-free/graphics
Installed-Size: 1609
Maintainer: Philippe Troin <phil@fifi.org>
Version: 3.10a-14
Replaces: xvdoc
Depends: libc5 (>= 5.4.0-0), libjpeg6a, libpng0 (>= 0.96), libtiff3 (>= 3.4beta035-1), xlib6 (>= 3.2-0), zlib1 (>= 1.00)
Conflicts: xvdoc
Description: An image viewer and manipulator for the X Window System.
 The xv program displays images in the GIF, JPEG, TIFF, PBM, PGM, PPM,
 X11 bitmap, Utah Raster Toolkit RLE, PDS/VICAR, Sun Rasterfile, BMP,
 PCX, IRIS RGB, XPM, Targa, XWD, possibly PostScript, and PM formats
 on workstations and terminals running the X11 Window System.
 .
 The creators of the GIF format require the following
 acknowledgement:
 .
  The Graphics Interchange Format(c) is the Copyright property of
  CompuServe Incorporated. GIF(sm) is a Service Mark property of
  CompuServe Incorporated.

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 114
Maintainer: Brian Mays <brian@debian.org>
Version: 2.4.2-11
Replaces: mt-st, cpio-mt
Depends: libc6
Conflicts: mt-st, cpio-mt
Description: GNU cpio -- a program to manage archives of files.
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.
 .
 This package also includes rmt, the remote tape server, and GNU mt, a
 tape drive control program.  The mt program is essential for magnetic
 tape drive users.  Debian's version of GNU mt supports SCSI tape
 drives.

Package: patch
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 83
Maintainer: Darren Stalder <torin@daft.com>
Version: 2.2-1
Depends: libc5 (>= 5.4.0-0)
Description: Apply a diff file to an original
 Patch will take a patch file containing any of the four forms
 of difference listing produced by the diff program and apply
 those differences to an original file, producing a patched
 version.

Package: make-doc
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 803
Maintainer: Manoj Srivastava <srivasta@debian.org>
Source: make
Version: 3.75-6
Suggests: make
Description: Documentation for the GNU version of the "make" utility.
 This package contains the postscript and HTML documentation for GNU
 Make.

Package: make
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 284
Maintainer: Manoj Srivastava <srivasta@debian.org>
Version: 3.75-6
Depends: libc6
Description: The GNU version of the "make" utility.
 GNU Make is a program that determines which pieces of a large
 program need to be recompiled and issues the commands to recompile
 them, when necessary. More information about GNU Make can be
 found in the `make' Info page.

Package: dpkg-dev
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 277
Maintainer: Klee Dienes and Ian Jackson <dpkg-maint@chiark.greenend.org.uk>
Source: dpkg
Version: 1.4.0.19
Replaces: dpkgname, dpkg (<< 1.4.0)
Recommends: cpio (>= 2.4.2-2), patch (>= 2.2-1), gcc, make
Conflicts: dpkgname
Conffiles:
 /etc/dpkg/shlibs.default 2f66e7de114b84d8ffc3abda51a6c055
Description: Package building tools for Debian Linux
 This package contains the tools (including dpkg-source) required to
 unpack, build and upload Debian source packages.  It also contains
 the programmers' and Debian policy manuals, which are the
 documentation for package developers.
 .
 `cpio' and `patch' are also required to manipulate source packages.
 Some older cpios are insufficient - use at least 2.4.2-2.
 .
 Most Debian source packages will require additional tools to build -
 for example, most packages need the `make' and the C compiler `gcc'.

Package: dpkg-perl
Status: install ok installed
Priority: extra
Section: devel
Installed-Size: 32
Maintainer: Klee Dienes <klee@debian.org>
Source: dpkg-scriptlib
Version: 0.1-2
Depends: perl, dpkg (>= 1.4.0.8)
Description: Perl interface modules for dpkg
 Contains Perl 5 modules for dpkg, the Debian package management
 system.  These are currently skeletal, but should eventually provide
 access to all low-level dpkg functions from within perl, as well as a
 number of higher-level routines.

Package: libg++272
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 546
Maintainer: joost witteveen <joostje@debian.org>
Version: 2.7.2.5-2
Depends: libc6
Description: The GNU C++ libraries (ELF version).
 This package contains the additional runtime libraries for g++.

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 1360
Maintainer: Klee Dienes and Ian Jackson <dpkg-maint@chiark.greenend.org.uk>
Version: 1.4.0.19
Pre-Depends: libc6, libg++272, ncurses3.4
Description: Package maintenance system for Debian Linux
 This package contains the programs which handle the installation and
 removal of packages on your system.
 .
 The primary interface for the dpkg suite is the `dselect' program;
 a more low-level and less user-friendly interface is available in
 the form of the `dpkg' command.
 .
 In order to unpack and build Debian source packages you will need to
 install the developers' package `dpkg-dev' as well as this one.

Package: ncurses3.4-dbg
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 930
Maintainer: Galen Hazelwood <galenh@micron.net>
Source: ncurses
Version: 1.9.9g-3
Depends: ncurses3.4-dev
Description: Video terminal manipulation - Debugging/profiling libraries.
 This package contains the static debugging and profiling libraries and
 symbolic links that developers using ncurses will need.

Package: libc5-altdev
Status: install ok unpacked
Priority: standard
Section: devel
Installed-Size: 3508
Maintainer: Helmut Geyer <Helmut.Geyer@iwr.uni-heidelberg.de>
Source: libc
Version: 5.4.33-7
Config-Version: 5.4.33-5
Depends: libc5 (= 5.4.33-7)
Conflicts: libc5-dev
Description: The Linux C library version 5 (alternative dev files).
 Includes libc headers, kernel headers (v2.0.29) and static
 libraries.  This package can be used to build libc5-base binaries
 even when the libc6-dev package is installed.

Package: libg++27-altdev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1894
Maintainer: joost witteveen <joostje@debian.org>
Source: libg++27
Version: 2.7.2.1-12
Provides: libg++27-dev, libg++-dev
Depends: libc5 (>= 5.4.7-6), libc5-altdev, libg++27 (= 2.7.2.1-12)
Description: The GNU C++ libraries (ELF version).
 This package contains the additional statically linked
 libraries for g++, and the header files. If you want the documentation,
 please install libg++272-dev

Package: ncurses3.4-dev
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 1006
Maintainer: Galen Hazelwood <galenh@micron.net>
Source: ncurses
Version: 1.9.9g-3
Replaces: ncurses-developer
Provides: ncurses-dev, ncurses-developer
Depends: ncurses3.4, libc6-dev
Conflicts: ncurses, ncurses-developer, ncurses21-dev, ncurses-dev
Description: Video terminal manipulation - Developer's libraries and docs.
 This package contains the header files, static, and profiling
 libraries and symbolic links that developers using ncurses will need.

Package: ncurses3.4
Status: install ok installed
Priority: required
Section: base
Installed-Size: 323
Maintainer: Galen Hazelwood <galenh@micron.net>
Source: ncurses
Version: 1.9.9g-3
Depends: libc6
Conflicts: ncurses
Description: Video terminal manipulation - shared libraries
 This package contains the shared libraries necessary to run programs
 compiled with the ncurses libraries.

Package: sharutils
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 312
Maintainer: Santiago Vila <sanvila@ctv.es>
Version: 1:4.2-2
Depends: libc5 (>= 5.4.0-0)
Conflicts: shar, uuencode
Description: shar, unshar, uuencode, uudecode
 `shar' makes so-called shell archives out of many files, preparing
 them for transmission by electronic mail services.  `unshar' helps
 unpacking shell archives after reception.  Other related utility
 programs help with other tasks.
 .
 `uuencode' prepares a file for transmission over an electronic
 channel which ignores or otherwise mangles the eight bit (high
 order bit) of bytes.  `uudecode' does the converse transformation.

Package: ispell
Status: install ok installed
Priority: standard
Section: text
Installed-Size: 257
Maintainer: Kenneth MacDonald <K.MacDonald@ed.ac.uk>
Version: 3.1.20-0.1
Depends: libc5 (>= 5.4.0-0), ncurses3.0
Recommends: ispell-dictionary
Description: An interactive spelling corrector
 Ispell corrects spelling in plain text, LaTeX, or
 nroff files.  Emacs has a nice interface to ispell.
 This version is 8 bit clean, allowing non-english
 dictionaries to be used. No dictionary is supplied,
 but it looks in /usr/lib/ispell/default.{aff,hash}
 and in /usr/dict/words by default.

Package: iamerican
Status: install ok installed
Priority: standard
Section: text
Installed-Size: 863
Maintainer: Kenneth MacDonald <K.MacDonald@ed.ac.uk>
Source: ispell
Version: 3.1.20-0.1
Provides: ispell-dictionary
Depends: ispell (>= 3.1.18-2)
Description: An American English dictionary for ispell.
 This is the americanmed+ dictionary, as supplied with
 the source for ispell.

Package: ibritish
Status: install ok installed
Priority: standard
Section: text
Installed-Size: 875
Maintainer: Kenneth MacDonald <K.MacDonald@ed.ac.uk>
Source: ispell
Version: 3.1.20-0.1
Provides: ispell-dictionary
Depends: ispell (>= 3.1.18-2)
Description: A British English dictionary for ispell.
 This is the britishmed+ dictionary, as supplied with
 the source for ispell.

Package: svgalibg1-dev
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 638
Maintainer: Andy Mortimer <andy.mortimer@poboxes.com>
Source: svgalib
Version: 1:1.2.11-1
Replaces: svgalib-dummyg1
Depends: svgalibg1 (= 1:1.2.11-1), libc6, libc6-dev
Conflicts: svgalib1-dev, svgalib-dev, svgalib-dummyg1
Description: Shared, non-x, graphics library used by Ghostscript et al.
 Only works with some video hardware; use with caution.
 Supported cards: generic VGA, Cirrus Logic GD542x/3x, newer Tseng
 ET4000/ET4000W32, Trident TVGA 8900C/9000, Oak OTI-037/67/77/87,
 ATI Mach32, some S3-based cards, ARK Logic ARK1000PV/2000PV.
 .
 This package contains the static libraries, header files and
 documentation.

Package: svgalibg1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 391
Maintainer: Andy Mortimer <andy.mortimer@poboxes.com>
Source: svgalib
Version: 1:1.2.11-1
Replaces: svgalib-dummyg1
Depends: libc6
Conflicts: svgalib, svgalib1 (<< 1:1.2.11-1), svgalib-dummyg1
Conffiles:
 /etc/vga/libvga.config 24ded31063cb2e2e6e706dbe1530388e
 /etc/vga/libvga.et4000 625713aa06a05cd242bef448c7cf2b71
Description: SVGA display utilities
 Only works with some video hardware; use with caution.
 Supported cards: generic VGA, Cirrus Logic GD542x/3x, newer Tseng
 ET4000/ET4000W32, Trident TVGA 8900C/9000, Oak OTI-037/67/77/87,
 ATI Mach32, some S3-based cards, ARK Logic ARK1000PV/2000PV.
 .
 This package contains the (libc6) shared libraries and config files.

Package: svgalib-bin
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 29
Maintainer: Andy Mortimer <andy.mortimer@poboxes.com>
Source: svgalib
Version: 1:1.2.11-1
Replaces: svgalib
Provides: svgalib1-bin
Depends: svgalibg1, libc6, svgalibg1 | svgalib-dummyg1
Description: SVGA display utilities
 Only works with some video hardware; use with caution.
 Supported cards: generic VGA, Cirrus Logic GD542x/3x, newer Tseng
 ET4000/ET4000W32, Trident TVGA 8900C/9000, Oak OTI-037/67/77/87,
 ATI Mach32, some S3-based cards, ARK Logic ARK1000PV/2000PV.
 .
 This package contains the Svgalib utility programs.

Package: file
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 172
Maintainer: Nicols Lichtmaier <nick@feedback.com.ar>
Version: 3.20.1-6
Depends: libc6
Conffiles:
 /etc/magic 660d458550a77bd8ce3dc4a564971bee
Description: Determines file type using "magic" numbers
 File tests each argument in an attempt to classify it.  There are three
 sets of tests, performed in this order: filesystem tests, magic number
 tests, and language tests.  The first test that succeeds causes the
 file type to be printed.

Package: rcs
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 499
Maintainer: Mark Baker <mbaker@iee.org>
Version: 5.7-7
Depends: libc6
Description: The GNU Revision Control System
 The Revision Control System (RCS) manages multiple
 revisions of files. RCS automates the storing, retrieval,
 logging, identification, and merging of revisions. RCS is
 useful for text that is revised frequently, for example
 programs, documentation, graphics, papers, and form letters.

Package: debmake
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 217
Maintainer: Christoph Lameter <clameter@debian.org>
Version: 3.3.12
Depends: libc5 (>= 5.4.0-0), dpkg-dev, file, fileutils (>= 3.16-4), patch, perl
Description: Development environment for Debian Sourcepackages
 Eases the development and maintenance of Debian Sourcepackages.
 .
  - deb-make: Generate a debian style sourcepackage from a regular sourcecode
   archive. Customizes control files. Provides example setup for debstd that is
   usually usable with minimal editing.
  - debchange: Maintain debian/changelog files to record changes
  - debclean: Purge a debian sourcetree
  - release: Upload and manages release numbers. Integrates with dupload
  - build: Wrapper to build a package without having to su.
  - debpkg : dpkg wrapper to be able to manage packages without su.
  - debi,debc convenience scripts for often repeated maintainer tasks.
 And most importantly "debstd" which has the following abilities:
  - Automatizes compression of documentation, localizes manpages
   compresses and installs them.
  - Supports multiple binaries generated from a single source package
  - Generates maintainer scripts for you and installs all scripts
   for you in the proper locations with the proper permissions.
  - Can perform modifications on a variety of important debian config files
   through generation of proper maintainer scripts.
  - Runs dpkg-shlibdeps on all ELF binaries for you and generates correct
   shlibs file for provided libraries automatically.
  - Checks symlinks to manpages /documentation and redirects
   them if a file was compressed.

