/* $NetBSD: rtl8169.c,v 1.159.2.2 2023/08/04 15:06:50 martin Exp $ */ /* * Copyright (c) 1997, 1998-2003 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. */ #include __KERNEL_RCSID(0, "$NetBSD: rtl8169.c,v 1.159.2.2 2023/08/04 15:06:50 martin Exp $"); /* $FreeBSD: /repoman/r/ncvs/src/sys/dev/re/if_re.c,v 1.20 2004/04/11 20:34:08 ru Exp $ */ /* * RealTek 8139C+/8169/8169S/8168/8110S PCI NIC driver * * Written by Bill Paul * Senior Networking Software Engineer * Wind River Systems */ /* * This driver is designed to support RealTek's next generation of * 10/100 and 10/100/1000 PCI ethernet controllers. There are currently * six devices in this family: the RTL8139C+, the RTL8169, the RTL8169S, * RTL8110S, the RTL8168 and the RTL8111. * * The 8139C+ is a 10/100 ethernet chip. It is backwards compatible * with the older 8139 family, however it also supports a special * C+ mode of operation that provides several new performance enhancing * features. These include: * * o Descriptor based DMA mechanism. Each descriptor represents * a single packet fragment. Data buffers may be aligned on * any byte boundary. * * o 64-bit DMA * * o TCP/IP checksum offload for both RX and TX * * o High and normal priority transmit DMA rings * * o VLAN tag insertion and extraction * * o TCP large send (segmentation offload) * * Like the 8139, the 8139C+ also has a built-in 10/100 PHY. The C+ * programming API is fairly straightforward. The RX filtering, EEPROM * access and PHY access is the same as it is on the older 8139 series * chips. * * The 8169 is a 64-bit 10/100/1000 gigabit ethernet MAC. It has almost the * same programming API and feature set as the 8139C+ with the following * differences and additions: * * o 1000Mbps mode * * o Jumbo frames * * o GMII and TBI ports/registers for interfacing with copper * or fiber PHYs * * o RX and TX DMA rings can have up to 1024 descriptors * (the 8139C+ allows a maximum of 64) * * o Slight differences in register layout from the 8139C+ * * The TX start and timer interrupt registers are at different locations * on the 8169 than they are on the 8139C+. Also, the status word in the * RX descriptor has a slightly different bit layout. The 8169 does not * have a built-in PHY. Most reference boards use a Marvell 88E1000 'Alaska' * copper gigE PHY. * * The 8169S/8110S 10/100/1000 devices have built-in copper gigE PHYs * (the 'S' stands for 'single-chip'). These devices have the same * programming API as the older 8169, but also have some vendor-specific * registers for the on-board PHY. The 8110S is a LAN-on-motherboard * part designed to be pin-compatible with the RealTek 8100 10/100 chip. * * This driver takes advantage of the RX and TX checksum offload and * VLAN tag insertion/extraction features. It also implements TX * interrupt moderation using the timer interrupt registers, which * significantly reduces TX interrupt load. There is also support * for jumbo frames, however the 8169/8169S/8110S can not transmit * jumbo frames larger than 7.5K, so the max MTU possible with this * driver is 7500 bytes. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* XXX for IP_MAXPACKET */ #include /* XXX for IP_MAXPACKET */ #include /* XXX for IP_MAXPACKET */ #include #include #include #include #include #include #include #include static inline void re_set_bufaddr(struct re_desc *, bus_addr_t); static int re_newbuf(struct rtk_softc *, int, struct mbuf *); static int re_rx_list_init(struct rtk_softc *); static int re_tx_list_init(struct rtk_softc *); static void re_rxeof(struct rtk_softc *); static void re_txeof(struct rtk_softc *); static void re_tick(void *); static void re_start(struct ifnet *); static int re_ioctl(struct ifnet *, u_long, void *); static int re_init(struct ifnet *); static void re_stop(struct ifnet *, int); static void re_watchdog(struct ifnet *); static int re_enable(struct rtk_softc *); static void re_disable(struct rtk_softc *); static int re_gmii_readreg(device_t, int, int, uint16_t *); static int re_gmii_writereg(device_t, int, int, uint16_t); static int re_miibus_readreg(device_t, int, int, uint16_t *); static int re_miibus_writereg(device_t, int, int, uint16_t); static void re_miibus_statchg(struct ifnet *); static void re_reset(struct rtk_softc *); static const struct re_revision { uint32_t re_chipid; const char *re_name; } re_revisions[] = { { RTK_HWREV_8100, "RTL8100" }, { RTK_HWREV_8100E, "RTL8100E" }, { RTK_HWREV_8100E_SPIN2, "RTL8100E 2" }, { RTK_HWREV_8101, "RTL8101" }, { RTK_HWREV_8101E, "RTL8101E" }, { RTK_HWREV_8102E, "RTL8102E" }, { RTK_HWREV_8106E, "RTL8106E" }, { RTK_HWREV_8401E, "RTL8401E" }, { RTK_HWREV_8402, "RTL8402" }, { RTK_HWREV_8411, "RTL8411" }, { RTK_HWREV_8411B, "RTL8411B" }, { RTK_HWREV_8102EL, "RTL8102EL" }, { RTK_HWREV_8102EL_SPIN1, "RTL8102EL 1" }, { RTK_HWREV_8103E, "RTL8103E" }, { RTK_HWREV_8110S, "RTL8110S" }, { RTK_HWREV_8139CPLUS, "RTL8139C+" }, { RTK_HWREV_8168B_SPIN1, "RTL8168 1" }, { RTK_HWREV_8168B_SPIN2, "RTL8168 2" }, { RTK_HWREV_8168B_SPIN3, "RTL8168 3" }, { RTK_HWREV_8168C, "RTL8168C/8111C" }, { RTK_HWREV_8168C_SPIN2, "RTL8168C/8111C" }, { RTK_HWREV_8168CP, "RTL8168CP/8111CP" }, { RTK_HWREV_8168F, "RTL8168F/8111F" }, { RTK_HWREV_8168G, "RTL8168G/8111G" }, { RTK_HWREV_8168GU, "RTL8168GU/8111GU" }, { RTK_HWREV_8168H, "RTL8168H/8111H" }, { RTK_HWREV_8105E, "RTL8105E" }, { RTK_HWREV_8105E_SPIN1, "RTL8105E" }, { RTK_HWREV_8168D, "RTL8168D/8111D" }, { RTK_HWREV_8168DP, "RTL8168DP/8111DP" }, { RTK_HWREV_8168E, "RTL8168E/8111E" }, { RTK_HWREV_8168E_VL, "RTL8168E/8111E-VL" }, { RTK_HWREV_8168EP, "RTL8168EP/8111EP" }, { RTK_HWREV_8168FP, "RTL8168FP/8117" }, { RTK_HWREV_8169, "RTL8169" }, { RTK_HWREV_8169_8110SB, "RTL8169/8110SB" }, { RTK_HWREV_8169_8110SBL, "RTL8169SBL" }, { RTK_HWREV_8169_8110SC, "RTL8169/8110SCd" }, { RTK_HWREV_8169_8110SCE, "RTL8169/8110SCe" }, { RTK_HWREV_8169S, "RTL8169S" }, { 0, NULL } }; static inline void re_set_bufaddr(struct re_desc *d, bus_addr_t addr) { d->re_bufaddr_lo = htole32((uint32_t)addr); if (sizeof(bus_addr_t) == sizeof(uint64_t)) d->re_bufaddr_hi = htole32((uint64_t)addr >> 32); else d->re_bufaddr_hi = 0; } static int re_gmii_readreg(device_t dev, int phy, int reg, uint16_t *val) { struct rtk_softc *sc = device_private(dev); uint32_t data; int i; if (phy != 7) return -1; /* Let the rgephy driver read the GMEDIASTAT register */ if (reg == RTK_GMEDIASTAT) { *val = CSR_READ_1(sc, RTK_GMEDIASTAT); return 0; } CSR_WRITE_4(sc, RTK_PHYAR, reg << 16); DELAY(1000); for (i = 0; i < RTK_TIMEOUT; i++) { data = CSR_READ_4(sc, RTK_PHYAR); if (data & RTK_PHYAR_BUSY) break; DELAY(100); } if (i == RTK_TIMEOUT) { printf("%s: PHY read failed\n", device_xname(sc->sc_dev)); return ETIMEDOUT; } *val = data & RTK_PHYAR_PHYDATA; return 0; } static int re_gmii_writereg(device_t dev, int phy, int reg, uint16_t val) { struct rtk_softc *sc = device_private(dev); uint32_t data; int i; CSR_WRITE_4(sc, RTK_PHYAR, (reg << 16) | (val & RTK_PHYAR_PHYDATA) | RTK_PHYAR_BUSY); DELAY(1000); for (i = 0; i < RTK_TIMEOUT; i++) { data = CSR_READ_4(sc, RTK_PHYAR); if (!(data & RTK_PHYAR_BUSY)) break; DELAY(100); } if (i == RTK_TIMEOUT) { printf("%s: PHY write reg %x <- %hx failed\n", device_xname(sc->sc_dev), reg, val); return ETIMEDOUT; } return 0; } static int re_miibus_readreg(device_t dev, int phy, int reg, uint16_t *val) { struct rtk_softc *sc = device_private(dev); uint16_t re8139_reg = 0; int s, rv = 0; s = splnet(); if ((sc->sc_quirk & RTKQ_8139CPLUS) == 0) { rv = re_gmii_readreg(dev, phy, reg, val); splx(s); return rv; } /* Pretend the internal PHY is only at address 0 */ if (phy) { splx(s); return -1; } switch (reg) { case MII_BMCR: re8139_reg = RTK_BMCR; break; case MII_BMSR: re8139_reg = RTK_BMSR; break; case MII_ANAR: re8139_reg = RTK_ANAR; break; case MII_ANER: re8139_reg = RTK_ANER; break; case MII_ANLPAR: re8139_reg = RTK_LPAR; break; case MII_PHYIDR1: case MII_PHYIDR2: *val = 0; splx(s); return 0; /* * Allow the rlphy driver to read the media status * register. If we have a link partner which does not * support NWAY, this is the register which will tell * us the results of parallel detection. */ case RTK_MEDIASTAT: *val = CSR_READ_1(sc, RTK_MEDIASTAT); splx(s); return 0; default: printf("%s: bad phy register\n", device_xname(sc->sc_dev)); splx(s); return -1; } *val = CSR_READ_2(sc, re8139_reg); if ((sc->sc_quirk & RTKQ_8139CPLUS) != 0 && re8139_reg == RTK_BMCR) { /* 8139C+ has different bit layout. */ *val &= ~(BMCR_LOOP | BMCR_ISO); } splx(s); return 0; } static int re_miibus_writereg(device_t dev, int phy, int reg, uint16_t val) { struct rtk_softc *sc = device_private(dev); uint16_t re8139_reg = 0; int s, rv; s = splnet(); if ((sc->sc_quirk & RTKQ_8139CPLUS) == 0) { rv = re_gmii_writereg(dev, phy, reg, val); splx(s); return rv; } /* Pretend the internal PHY is only at address 0 */ if (phy) { splx(s); return -1; } switch (reg) { case MII_BMCR: re8139_reg = RTK_BMCR; if ((sc->sc_quirk & RTKQ_8139CPLUS) != 0) { /* 8139C+ has different bit layout. */ val &= ~(BMCR_LOOP | BMCR_ISO); } break; case MII_BMSR: re8139_reg = RTK_BMSR; break; case MII_ANAR: re8139_reg = RTK_ANAR; break; case MII_ANER: re8139_reg = RTK_ANER; break; case MII_ANLPAR: re8139_reg = RTK_LPAR; break; case MII_PHYIDR1: case MII_PHYIDR2: splx(s); return 0; break; default: printf("%s: bad phy register\n", device_xname(sc->sc_dev)); splx(s); return -1; } CSR_WRITE_2(sc, re8139_reg, val); splx(s); return 0; } static void re_miibus_statchg(struct ifnet *ifp) { return; } static void re_reset(struct rtk_softc *sc) { int i; CSR_WRITE_1(sc, RTK_COMMAND, RTK_CMD_RESET); for (i = 0; i < RTK_TIMEOUT; i++) { DELAY(10); if ((CSR_READ_1(sc, RTK_COMMAND) & RTK_CMD_RESET) == 0) break; } if (i == RTK_TIMEOUT) printf("%s: reset never completed!\n", device_xname(sc->sc_dev)); /* * NB: Realtek-supplied FreeBSD driver does this only for MACFG_3, * but also says "Rtl8169s sigle chip detected". */ if ((sc->sc_quirk & RTKQ_MACLDPS) != 0) CSR_WRITE_1(sc, RTK_LDPS, 1); } /* * The following routine is designed to test for a defect on some * 32-bit 8169 cards. Some of these NICs have the REQ64# and ACK64# * lines connected to the bus, however for a 32-bit only card, they * should be pulled high. The result of this defect is that the * NIC will not work right if you plug it into a 64-bit slot: DMA * operations will be done with 64-bit transfers, which will fail * because the 64-bit data lines aren't connected. * * There's no way to work around this (short of talking a soldering * iron to the board), however we can detect it. The method we use * here is to put the NIC into digital loopback mode, set the receiver * to promiscuous mode, and then try to send a frame. We then compare * the frame data we sent to what was received. If the data matches, * then the NIC is working correctly, otherwise we know the user has * a defective NIC which has been mistakenly plugged into a 64-bit PCI * slot. In the latter case, there's no way the NIC can work correctly, * so we print out a message on the console and abort the device attach. */ int re_diag(struct rtk_softc *sc) { struct ifnet *ifp = &sc->ethercom.ec_if; struct mbuf *m0; struct ether_header *eh; struct re_rxsoft *rxs; struct re_desc *cur_rx; bus_dmamap_t dmamap; uint16_t status; uint32_t rxstat; int total_len, i, s, error = 0; static const uint8_t dst[] = { 0x00, 'h', 'e', 'l', 'l', 'o' }; static const uint8_t src[] = { 0x00, 'w', 'o', 'r', 'l', 'd' }; /* Allocate a single mbuf */ MGETHDR(m0, M_DONTWAIT, MT_DATA); if (m0 == NULL) return ENOBUFS; /* * Initialize the NIC in test mode. This sets the chip up * so that it can send and receive frames, but performs the * following special functions: * - Puts receiver in promiscuous mode * - Enables digital loopback mode * - Leaves interrupts turned off */ ifp->if_flags |= IFF_PROMISC; sc->re_testmode = 1; re_init(ifp); re_stop(ifp, 0); DELAY(100000); re_init(ifp); /* Put some data in the mbuf */ eh = mtod(m0, struct ether_header *); memcpy(eh->ether_dhost, &dst, ETHER_ADDR_LEN); memcpy(eh->ether_shost, &src, ETHER_ADDR_LEN); eh->ether_type = htons(ETHERTYPE_IP); m0->m_pkthdr.len = m0->m_len = ETHER_MIN_LEN - ETHER_CRC_LEN; /* * Queue the packet, start transmission. */ CSR_WRITE_2(sc, RTK_ISR, 0xFFFF); s = splnet(); IF_ENQUEUE(&ifp->if_snd, m0); re_start(ifp); splx(s); m0 = NULL; /* Wait for it to propagate through the chip */ DELAY(100000); for (i = 0; i < RTK_TIMEOUT; i++) { status = CSR_READ_2(sc, RTK_ISR); if ((status & (RTK_ISR_TIMEOUT_EXPIRED | RTK_ISR_RX_OK)) == (RTK_ISR_TIMEOUT_EXPIRED | RTK_ISR_RX_OK)) break; DELAY(10); } if (i == RTK_TIMEOUT) { aprint_error_dev(sc->sc_dev, "diagnostic failed, failed to receive packet " "in loopback mode\n"); error = EIO; goto done; } /* * The packet should have been dumped into the first * entry in the RX DMA ring. Grab it from there. */ rxs = &sc->re_ldata.re_rxsoft[0]; dmamap = rxs->rxs_dmamap; bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD); bus_dmamap_unload(sc->sc_dmat, dmamap); m0 = rxs->rxs_mbuf; rxs->rxs_mbuf = NULL; eh = mtod(m0, struct ether_header *); RE_RXDESCSYNC(sc, 0, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); cur_rx = &sc->re_ldata.re_rx_list[0]; rxstat = le32toh(cur_rx->re_cmdstat); total_len = rxstat & sc->re_rxlenmask; if (total_len != ETHER_MIN_LEN) { aprint_error_dev(sc->sc_dev, "diagnostic failed, received short packet\n"); error = EIO; goto done; } /* Test that the received packet data matches what we sent. */ if (memcmp(&eh->ether_dhost, &dst, ETHER_ADDR_LEN) || memcmp(&eh->ether_shost, &src, ETHER_ADDR_LEN) || ntohs(eh->ether_type) != ETHERTYPE_IP) { aprint_error_dev(sc->sc_dev, "WARNING, DMA FAILURE!\n" "expected TX data: %s/%s/0x%x\n" "received RX data: %s/%s/0x%x\n" "You may have a defective 32-bit NIC plugged " "into a 64-bit PCI slot.\n" "Please re-install the NIC in a 32-bit slot " "for proper operation.\n" "Read the re(4) man page for more details.\n" , ether_sprintf(dst), ether_sprintf(src), ETHERTYPE_IP, ether_sprintf(eh->ether_dhost), ether_sprintf(eh->ether_shost), ntohs(eh->ether_type)); error = EIO; } done: /* Turn interface off, release resources */ sc->re_testmode = 0; ifp->if_flags &= ~IFF_PROMISC; re_stop(ifp, 0); if (m0 != NULL) m_freem(m0); return error; } /* * Attach the interface. Allocate softc structures, do ifmedia * setup and ethernet/BPF attach. */ void re_attach(struct rtk_softc *sc) { uint8_t eaddr[ETHER_ADDR_LEN]; struct ifnet *ifp; struct mii_data *mii = &sc->mii; int error = 0, i; const struct re_revision *rr; const char *re_name = NULL; if ((sc->sc_quirk & RTKQ_8139CPLUS) == 0) { /* Revision of 8169/8169S/8110s in bits 30..26, 23 */ sc->sc_hwrev = CSR_READ_4(sc, RTK_TXCFG) & RTK_TXCFG_HWREV; for (rr = re_revisions; rr->re_name != NULL; rr++) { if (rr->re_chipid == sc->sc_hwrev) re_name = rr->re_name; } if (re_name == NULL) aprint_normal_dev(sc->sc_dev, "unknown ASIC (0x%04x)\n", sc->sc_hwrev >> 16); else aprint_normal_dev(sc->sc_dev, "%s (0x%04x)\n", re_name, sc->sc_hwrev >> 16); switch (sc->sc_hwrev) { case RTK_HWREV_8169: sc->sc_quirk |= RTKQ_8169NONS; break; case RTK_HWREV_8169S: case RTK_HWREV_8110S: case RTK_HWREV_8169_8110SB: case RTK_HWREV_8169_8110SBL: case RTK_HWREV_8169_8110SC: sc->sc_quirk |= RTKQ_MACLDPS; break; case RTK_HWREV_8168B_SPIN1: case RTK_HWREV_8168B_SPIN2: case RTK_HWREV_8168B_SPIN3: sc->sc_quirk |= RTKQ_MACSTAT; break; case RTK_HWREV_8168C: case RTK_HWREV_8168C_SPIN2: case RTK_HWREV_8168CP: case RTK_HWREV_8168D: case RTK_HWREV_8168DP: sc->sc_quirk |= RTKQ_DESCV2 | RTKQ_NOEECMD | RTKQ_MACSTAT | RTKQ_CMDSTOP; /* * From FreeBSD driver: * * These (8168/8111) controllers support jumbo frame * but it seems that enabling it requires touching * additional magic registers. Depending on MAC * revisions some controllers need to disable * checksum offload. So disable jumbo frame until * I have better idea what it really requires to * make it support. * RTL8168C/CP : supports up to 6KB jumbo frame. * RTL8111C/CP : supports up to 9KB jumbo frame. */ sc->sc_quirk |= RTKQ_NOJUMBO; break; case RTK_HWREV_8168E: sc->sc_quirk |= RTKQ_DESCV2 | RTKQ_NOEECMD | RTKQ_MACSTAT | RTKQ_CMDSTOP | RTKQ_PHYWAKE_PM | RTKQ_NOJUMBO; break; case RTK_HWREV_8168E_VL: case RTK_HWREV_8168F: case RTK_HWREV_8411: sc->sc_quirk |= RTKQ_DESCV2 | RTKQ_NOEECMD | RTKQ_MACSTAT | RTKQ_CMDSTOP | RTKQ_NOJUMBO; break; case RTK_HWREV_8168EP: case RTK_HWREV_8168FP: case RTK_HWREV_8168G: case RTK_HWREV_8168GU: case RTK_HWREV_8168H: case RTK_HWREV_8411B: sc->sc_quirk |= RTKQ_DESCV2 | RTKQ_NOEECMD | RTKQ_MACSTAT | RTKQ_CMDSTOP | RTKQ_NOJUMBO | RTKQ_RXDV_GATED | RTKQ_TXRXEN_LATER; break; case RTK_HWREV_8100E: case RTK_HWREV_8100E_SPIN2: case RTK_HWREV_8101E: sc->sc_quirk |= RTKQ_NOJUMBO; break; case RTK_HWREV_8102E: case RTK_HWREV_8102EL: case RTK_HWREV_8102EL_SPIN1: sc->sc_quirk |= RTKQ_DESCV2 | RTKQ_NOEECMD | RTKQ_MACSTAT | RTKQ_CMDSTOP | RTKQ_NOJUMBO; break; case RTK_HWREV_8103E: sc->sc_quirk |= RTKQ_DESCV2 | RTKQ_NOEECMD | RTKQ_MACSTAT | RTKQ_CMDSTOP; break; case RTK_HWREV_8401E: case RTK_HWREV_8105E: case RTK_HWREV_8105E_SPIN1: /* XXX */ case RTK_HWREV_8106E: sc->sc_quirk |= RTKQ_PHYWAKE_PM | RTKQ_DESCV2 | RTKQ_NOEECMD | RTKQ_MACSTAT | RTKQ_CMDSTOP; break; case RTK_HWREV_8402: sc->sc_quirk |= RTKQ_PHYWAKE_PM | RTKQ_DESCV2 | RTKQ_NOEECMD | RTKQ_MACSTAT | RTKQ_CMDSTOP; /* CMDSTOP_WAIT_TXQ */ break; default: aprint_normal_dev(sc->sc_dev, "Use default quirks\n"); /* assume the latest features */ sc->sc_quirk |= RTKQ_DESCV2 | RTKQ_NOEECMD; sc->sc_quirk |= RTKQ_NOJUMBO; } /* Set RX length mask */ sc->re_rxlenmask = RE_RDESC_STAT_GFRAGLEN; sc->re_ldata.re_tx_desc_cnt = RE_TX_DESC_CNT_8169; } else { sc->sc_quirk |= RTKQ_NOJUMBO; /* Set RX length mask */ sc->re_rxlenmask = RE_RDESC_STAT_FRAGLEN; sc->re_ldata.re_tx_desc_cnt = RE_TX_DESC_CNT_8139; } /* Reset the adapter. */ re_reset(sc); /* * RTL81x9 chips automatically read EEPROM to init MAC address, * and some NAS override its MAC address per own configuration, * so no need to explicitely read EEPROM and set ID registers. */ #ifdef RE_USE_EECMD if ((sc->sc_quirk & RTKQ_NOEECMD) != 0) { /* * Get station address from ID registers. */ for (i = 0; i < ETHER_ADDR_LEN; i++) eaddr[i] = CSR_READ_1(sc, RTK_IDR0 + i); } else { uint16_t val; int addr_len; /* * Get station address from the EEPROM. */ if (rtk_read_eeprom(sc, RTK_EE_ID, RTK_EEADDR_LEN1) == 0x8129) addr_len = RTK_EEADDR_LEN1; else addr_len = RTK_EEADDR_LEN0; /* * Get station address from the EEPROM. */ for (i = 0; i < ETHER_ADDR_LEN / 2; i++) { val = rtk_read_eeprom(sc, RTK_EE_EADDR0 + i, addr_len); eaddr[(i * 2) + 0] = val & 0xff; eaddr[(i * 2) + 1] = val >> 8; } } #else /* * Get station address from ID registers. */ for (i = 0; i < ETHER_ADDR_LEN; i++) eaddr[i] = CSR_READ_1(sc, RTK_IDR0 + i); #endif /* Take PHY out of power down mode. */ if ((sc->sc_quirk & RTKQ_PHYWAKE_PM) != 0) CSR_WRITE_1(sc, RTK_PMCH, CSR_READ_1(sc, RTK_PMCH) | 0x80); aprint_normal_dev(sc->sc_dev, "Ethernet address %s\n", ether_sprintf(eaddr)); if (sc->re_ldata.re_tx_desc_cnt > PAGE_SIZE / sizeof(struct re_desc)) { sc->re_ldata.re_tx_desc_cnt = PAGE_SIZE / sizeof(struct re_desc); } aprint_verbose_dev(sc->sc_dev, "using %d tx descriptors\n", sc->re_ldata.re_tx_desc_cnt); KASSERT(RE_NEXT_TX_DESC(sc, RE_TX_DESC_CNT(sc) - 1) == 0); /* Allocate DMA'able memory for the TX ring */ if ((error = bus_dmamem_alloc(sc->sc_dmat, RE_TX_LIST_SZ(sc), RE_RING_ALIGN, 0, &sc->re_ldata.re_tx_listseg, 1, &sc->re_ldata.re_tx_listnseg, BUS_DMA_NOWAIT)) != 0) { aprint_error_dev(sc->sc_dev, "can't allocate tx listseg, error = %d\n", error); goto fail_0; } /* Load the map for the TX ring. */ if ((error = bus_dmamem_map(sc->sc_dmat, &sc->re_ldata.re_tx_listseg, sc->re_ldata.re_tx_listnseg, RE_TX_LIST_SZ(sc), (void **)&sc->re_ldata.re_tx_list, BUS_DMA_COHERENT | BUS_DMA_NOWAIT)) != 0) { aprint_error_dev(sc->sc_dev, "can't map tx list, error = %d\n", error); goto fail_1; } memset(sc->re_ldata.re_tx_list, 0, RE_TX_LIST_SZ(sc)); if ((error = bus_dmamap_create(sc->sc_dmat, RE_TX_LIST_SZ(sc), 1, RE_TX_LIST_SZ(sc), 0, 0, &sc->re_ldata.re_tx_list_map)) != 0) { aprint_error_dev(sc->sc_dev, "can't create tx list map, error = %d\n", error); goto fail_2; } if ((error = bus_dmamap_load(sc->sc_dmat, sc->re_ldata.re_tx_list_map, sc->re_ldata.re_tx_list, RE_TX_LIST_SZ(sc), NULL, BUS_DMA_NOWAIT)) != 0) { aprint_error_dev(sc->sc_dev, "can't load tx list, error = %d\n", error); goto fail_3; } /* Create DMA maps for TX buffers */ for (i = 0; i < RE_TX_QLEN; i++) { error = bus_dmamap_create(sc->sc_dmat, round_page(IP_MAXPACKET), RE_TX_DESC_CNT(sc), RE_TDESC_CMD_FRAGLEN, 0, 0, &sc->re_ldata.re_txq[i].txq_dmamap); if (error) { aprint_error_dev(sc->sc_dev, "can't create DMA map for TX\n"); goto fail_4; } } /* Allocate DMA'able memory for the RX ring */ /* XXX see also a comment about RE_RX_DMAMEM_SZ in rtl81x9var.h */ if ((error = bus_dmamem_alloc(sc->sc_dmat, RE_RX_DMAMEM_SZ, RE_RING_ALIGN, 0, &sc->re_ldata.re_rx_listseg, 1, &sc->re_ldata.re_rx_listnseg, BUS_DMA_NOWAIT)) != 0) { aprint_error_dev(sc->sc_dev, "can't allocate rx listseg, error = %d\n", error); goto fail_4; } /* Load the map for the RX ring. */ if ((error = bus_dmamem_map(sc->sc_dmat, &sc->re_ldata.re_rx_listseg, sc->re_ldata.re_rx_listnseg, RE_RX_DMAMEM_SZ, (void **)&sc->re_ldata.re_rx_list, BUS_DMA_COHERENT | BUS_DMA_NOWAIT)) != 0) { aprint_error_dev(sc->sc_dev, "can't map rx list, error = %d\n", error); goto fail_5; } memset(sc->re_ldata.re_rx_list, 0, RE_RX_DMAMEM_SZ); if ((error = bus_dmamap_create(sc->sc_dmat, RE_RX_DMAMEM_SZ, 1, RE_RX_DMAMEM_SZ, 0, 0, &sc->re_ldata.re_rx_list_map)) != 0) { aprint_error_dev(sc->sc_dev, "can't create rx list map, error = %d\n", error); goto fail_6; } if ((error = bus_dmamap_load(sc->sc_dmat, sc->re_ldata.re_rx_list_map, sc->re_ldata.re_rx_list, RE_RX_DMAMEM_SZ, NULL, BUS_DMA_NOWAIT)) != 0) { aprint_error_dev(sc->sc_dev, "can't load rx list, error = %d\n", error); goto fail_7; } /* Create DMA maps for RX buffers */ for (i = 0; i < RE_RX_DESC_CNT; i++) { error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES, 0, 0, &sc->re_ldata.re_rxsoft[i].rxs_dmamap); if (error) { aprint_error_dev(sc->sc_dev, "can't create DMA map for RX\n"); goto fail_8; } } /* * Record interface as attached. From here, we should not fail. */ sc->sc_flags |= RTK_ATTACHED; ifp = &sc->ethercom.ec_if; ifp->if_softc = sc; strlcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ); ifp->if_mtu = ETHERMTU; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = re_ioctl; sc->ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU | ETHERCAP_VLAN_HWTAGGING; ifp->if_start = re_start; ifp->if_stop = re_stop; /* * IFCAP_CSUM_IPv4_Tx on re(4) is broken for small packets, * so we have a workaround to handle the bug by padding * such packets manually. */ ifp->if_capabilities |= IFCAP_CSUM_IPv4_Tx | IFCAP_CSUM_IPv4_Rx | IFCAP_CSUM_TCPv4_Tx | IFCAP_CSUM_TCPv4_Rx | IFCAP_CSUM_UDPv4_Tx | IFCAP_CSUM_UDPv4_Rx | IFCAP_TSOv4; ifp->if_watchdog = re_watchdog; ifp->if_init = re_init; ifp->if_snd.ifq_maxlen = RE_IFQ_MAXLEN; ifp->if_capenable = ifp->if_capabilities; IFQ_SET_READY(&ifp->if_snd); callout_init(&sc->rtk_tick_ch, 0); /* Do MII setup */ mii->mii_ifp = ifp; mii->mii_readreg = re_miibus_readreg; mii->mii_writereg = re_miibus_writereg; mii->mii_statchg = re_miibus_statchg; sc->ethercom.ec_mii = mii; ifmedia_init(&mii->mii_media, IFM_IMASK, ether_mediachange, ether_mediastatus); mii_attach(sc->sc_dev, mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY, 0); ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_AUTO); /* * Call MI attach routine. */ if_attach(ifp); if_deferred_start_init(ifp, NULL); ether_ifattach(ifp, eaddr); rnd_attach_source(&sc->rnd_source, device_xname(sc->sc_dev), RND_TYPE_NET, RND_FLAG_DEFAULT); if (pmf_device_register(sc->sc_dev, NULL, NULL)) pmf_class_network_register(sc->sc_dev, ifp); else aprint_error_dev(sc->sc_dev, "couldn't establish power handler\n"); return; fail_8: /* Destroy DMA maps for RX buffers. */ for (i = 0; i < RE_RX_DESC_CNT; i++) if (sc->re_ldata.re_rxsoft[i].rxs_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, sc->re_ldata.re_rxsoft[i].rxs_dmamap); /* Free DMA'able memory for the RX ring. */ bus_dmamap_unload(sc->sc_dmat, sc->re_ldata.re_rx_list_map); fail_7: bus_dmamap_destroy(sc->sc_dmat, sc->re_ldata.re_rx_list_map); fail_6: bus_dmamem_unmap(sc->sc_dmat, (void *)sc->re_ldata.re_rx_list, RE_RX_DMAMEM_SZ); fail_5: bus_dmamem_free(sc->sc_dmat, &sc->re_ldata.re_rx_listseg, sc->re_ldata.re_rx_listnseg); fail_4: /* Destroy DMA maps for TX buffers. */ for (i = 0; i < RE_TX_QLEN; i++) if (sc->re_ldata.re_txq[i].txq_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, sc->re_ldata.re_txq[i].txq_dmamap); /* Free DMA'able memory for the TX ring. */ bus_dmamap_unload(sc->sc_dmat, sc->re_ldata.re_tx_list_map); fail_3: bus_dmamap_destroy(sc->sc_dmat, sc->re_ldata.re_tx_list_map); fail_2: bus_dmamem_unmap(sc->sc_dmat, (void *)sc->re_ldata.re_tx_list, RE_TX_LIST_SZ(sc)); fail_1: bus_dmamem_free(sc->sc_dmat, &sc->re_ldata.re_tx_listseg, sc->re_ldata.re_tx_listnseg); fail_0: return; } /* * re_activate: * Handle device activation/deactivation requests. */ int re_activate(device_t self, enum devact act) { struct rtk_softc *sc = device_private(self); switch (act) { case DVACT_DEACTIVATE: if_deactivate(&sc->ethercom.ec_if); return 0; default: return EOPNOTSUPP; } } /* * re_detach: * Detach a rtk interface. */ int re_detach(struct rtk_softc *sc) { struct ifnet *ifp = &sc->ethercom.ec_if; int i; /* * Succeed now if there isn't any work to do. */ if ((sc->sc_flags & RTK_ATTACHED) == 0) return 0; /* Unhook our tick handler. */ callout_stop(&sc->rtk_tick_ch); /* Detach all PHYs. */ mii_detach(&sc->mii, MII_PHY_ANY, MII_OFFSET_ANY); /* Delete all remaining media. */ ifmedia_delete_instance(&sc->mii.mii_media, IFM_INST_ANY); rnd_detach_source(&sc->rnd_source); ether_ifdetach(ifp); if_detach(ifp); /* Destroy DMA maps for RX buffers. */ for (i = 0; i < RE_RX_DESC_CNT; i++) if (sc->re_ldata.re_rxsoft[i].rxs_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, sc->re_ldata.re_rxsoft[i].rxs_dmamap); /* Free DMA'able memory for the RX ring. */ bus_dmamap_unload(sc->sc_dmat, sc->re_ldata.re_rx_list_map); bus_dmamap_destroy(sc->sc_dmat, sc->re_ldata.re_rx_list_map); bus_dmamem_unmap(sc->sc_dmat, (void *)sc->re_ldata.re_rx_list, RE_RX_DMAMEM_SZ); bus_dmamem_free(sc->sc_dmat, &sc->re_ldata.re_rx_listseg, sc->re_ldata.re_rx_listnseg); /* Destroy DMA maps for TX buffers. */ for (i = 0; i < RE_TX_QLEN; i++) if (sc->re_ldata.re_txq[i].txq_dmamap != NULL) bus_dmamap_destroy(sc->sc_dmat, sc->re_ldata.re_txq[i].txq_dmamap); /* Free DMA'able memory for the TX ring. */ bus_dmamap_unload(sc->sc_dmat, sc->re_ldata.re_tx_list_map); bus_dmamap_destroy(sc->sc_dmat, sc->re_ldata.re_tx_list_map); bus_dmamem_unmap(sc->sc_dmat, (void *)sc->re_ldata.re_tx_list, RE_TX_LIST_SZ(sc)); bus_dmamem_free(sc->sc_dmat, &sc->re_ldata.re_tx_listseg, sc->re_ldata.re_tx_listnseg); pmf_device_deregister(sc->sc_dev); /* we don't want to run again */ sc->sc_flags &= ~RTK_ATTACHED; return 0; } /* * re_enable: * Enable the RTL81X9 chip. */ static int re_enable(struct rtk_softc *sc) { if (RTK_IS_ENABLED(sc) == 0 && sc->sc_enable != NULL) { if ((*sc->sc_enable)(sc) != 0) { printf("%s: device enable failed\n", device_xname(sc->sc_dev)); return EIO; } sc->sc_flags |= RTK_ENABLED; } return 0; } /* * re_disable: * Disable the RTL81X9 chip. */ static void re_disable(struct rtk_softc *sc) { if (RTK_IS_ENABLED(sc) && sc->sc_disable != NULL) { (*sc->sc_disable)(sc); sc->sc_flags &= ~RTK_ENABLED; } } static int re_newbuf(struct rtk_softc *sc, int idx, struct mbuf *m) { struct mbuf *n = NULL; bus_dmamap_t map; struct re_desc *d; struct re_rxsoft *rxs; uint32_t cmdstat; int error; if (m == NULL) { MGETHDR(n, M_DONTWAIT, MT_DATA); if (n == NULL) return ENOBUFS; MCLGET(n, M_DONTWAIT); if ((n->m_flags & M_EXT) == 0) { m_freem(n); return ENOBUFS; } m = n; } else m->m_data = m->m_ext.ext_buf; /* * Initialize mbuf length fields and fixup * alignment so that the frame payload is * longword aligned. */ m->m_len = m->m_pkthdr.len = MCLBYTES - RE_ETHER_ALIGN; m->m_data += RE_ETHER_ALIGN; rxs = &sc->re_ldata.re_rxsoft[idx]; map = rxs->rxs_dmamap; error = bus_dmamap_load_mbuf(sc->sc_dmat, map, m, BUS_DMA_READ|BUS_DMA_NOWAIT); if (error) goto out; bus_dmamap_sync(sc->sc_dmat, map, 0, map->dm_mapsize, BUS_DMASYNC_PREREAD); d = &sc->re_ldata.re_rx_list[idx]; #ifdef DIAGNOSTIC RE_RXDESCSYNC(sc, idx, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); cmdstat = le32toh(d->re_cmdstat); RE_RXDESCSYNC(sc, idx, BUS_DMASYNC_PREREAD); if (cmdstat & RE_RDESC_STAT_OWN) { panic("%s: tried to map busy RX descriptor", device_xname(sc->sc_dev)); } #endif rxs->rxs_mbuf = m; d->re_vlanctl = 0; cmdstat = map->dm_segs[0].ds_len; if (idx == (RE_RX_DESC_CNT - 1)) cmdstat |= RE_RDESC_CMD_EOR; re_set_bufaddr(d, map->dm_segs[0].ds_addr); d->re_cmdstat = htole32(cmdstat); RE_RXDESCSYNC(sc, idx, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); cmdstat |= RE_RDESC_CMD_OWN; d->re_cmdstat = htole32(cmdstat); RE_RXDESCSYNC(sc, idx, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); return 0; out: if (n != NULL) m_freem(n); return ENOMEM; } static int re_tx_list_init(struct rtk_softc *sc) { int i; memset(sc->re_ldata.re_tx_list, 0, RE_TX_LIST_SZ(sc)); for (i = 0; i < RE_TX_QLEN; i++) { sc->re_ldata.re_txq[i].txq_mbuf = NULL; } bus_dmamap_sync(sc->sc_dmat, sc->re_ldata.re_tx_list_map, 0, sc->re_ldata.re_tx_list_map->dm_mapsize, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); sc->re_ldata.re_txq_prodidx = 0; sc->re_ldata.re_txq_considx = 0; sc->re_ldata.re_txq_free = RE_TX_QLEN; sc->re_ldata.re_tx_free = RE_TX_DESC_CNT(sc); sc->re_ldata.re_tx_nextfree = 0; return 0; } static int re_rx_list_init(struct rtk_softc *sc) { int i; memset(sc->re_ldata.re_rx_list, 0, RE_RX_LIST_SZ); for (i = 0; i < RE_RX_DESC_CNT; i++) { if (re_newbuf(sc, i, NULL) == ENOBUFS) return ENOBUFS; } sc->re_ldata.re_rx_prodidx = 0; sc->re_head = sc->re_tail = NULL; return 0; } /* * RX handler for C+ and 8169. For the gigE chips, we support * the reception of jumbo frames that have been fragmented * across multiple 2K mbuf cluster buffers. */ static void re_rxeof(struct rtk_softc *sc) { struct mbuf *m; struct ifnet *ifp; int i, total_len; struct re_desc *cur_rx; struct re_rxsoft *rxs; uint32_t rxstat, rxvlan; ifp = &sc->ethercom.ec_if; for (i = sc->re_ldata.re_rx_prodidx;; i = RE_NEXT_RX_DESC(sc, i)) { cur_rx = &sc->re_ldata.re_rx_list[i]; RE_RXDESCSYNC(sc, i, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); rxstat = le32toh(cur_rx->re_cmdstat); rxvlan = le32toh(cur_rx->re_vlanctl); RE_RXDESCSYNC(sc, i, BUS_DMASYNC_PREREAD); if ((rxstat & RE_RDESC_STAT_OWN) != 0) { break; } total_len = rxstat & sc->re_rxlenmask; rxs = &sc->re_ldata.re_rxsoft[i]; m = rxs->rxs_mbuf; /* Invalidate the RX mbuf and unload its map */ bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD); bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); if ((rxstat & RE_RDESC_STAT_EOF) == 0) { m->m_len = MCLBYTES - RE_ETHER_ALIGN; if (sc->re_head == NULL) sc->re_head = sc->re_tail = m; else { m_remove_pkthdr(m); sc->re_tail->m_next = m; sc->re_tail = m; } re_newbuf(sc, i, NULL); continue; } /* * NOTE: for the 8139C+, the frame length field * is always 12 bits in size, but for the gigE chips, * it is 13 bits (since the max RX frame length is 16K). * Unfortunately, all 32 bits in the status word * were already used, so to make room for the extra * length bit, RealTek took out the 'frame alignment * error' bit and shifted the other status bits * over one slot. The OWN, EOR, FS and LS bits are * still in the same places. We have already extracted * the frame length and checked the OWN bit, so rather * than using an alternate bit mapping, we shift the * status bits one space to the right so we can evaluate * them using the 8169 status as though it was in the * same format as that of the 8139C+. */ if ((sc->sc_quirk & RTKQ_8139CPLUS) == 0) rxstat >>= 1; if (__predict_false((rxstat & RE_RDESC_STAT_RXERRSUM) != 0)) { #ifdef RE_DEBUG printf("%s: RX error (rxstat = 0x%08x)", device_xname(sc->sc_dev), rxstat); if (rxstat & RE_RDESC_STAT_FRALIGN) printf(", frame alignment error"); if (rxstat & RE_RDESC_STAT_BUFOFLOW) printf(", out of buffer space"); if (rxstat & RE_RDESC_STAT_FIFOOFLOW) printf(", FIFO overrun"); if (rxstat & RE_RDESC_STAT_GIANT) printf(", giant packet"); if (rxstat & RE_RDESC_STAT_RUNT) printf(", runt packet"); if (rxstat & RE_RDESC_STAT_CRCERR) printf(", CRC error"); printf("\n"); #endif ifp->if_ierrors++; /* * If this is part of a multi-fragment packet, * discard all the pieces. */ if (sc->re_head != NULL) { m_freem(sc->re_head); sc->re_head = sc->re_tail = NULL; } re_newbuf(sc, i, m); continue; } /* * If allocating a replacement mbuf fails, * reload the current one. */ if (__predict_false(re_newbuf(sc, i, NULL) != 0)) { ifp->if_ierrors++; if (sc->re_head != NULL) { m_freem(sc->re_head); sc->re_head = sc->re_tail = NULL; } re_newbuf(sc, i, m); continue; } if (sc->re_head != NULL) { m->m_len = total_len % (MCLBYTES - RE_ETHER_ALIGN); /* * Special case: if there's 4 bytes or less * in this buffer, the mbuf can be discarded: * the last 4 bytes is the CRC, which we don't * care about anyway. */ if (m->m_len <= ETHER_CRC_LEN) { sc->re_tail->m_len -= (ETHER_CRC_LEN - m->m_len); m_freem(m); } else { m->m_len -= ETHER_CRC_LEN; m_remove_pkthdr(m); sc->re_tail->m_next = m; } m = sc->re_head; sc->re_head = sc->re_tail = NULL; m->m_pkthdr.len = total_len - ETHER_CRC_LEN; } else m->m_pkthdr.len = m->m_len = (total_len - ETHER_CRC_LEN); m_set_rcvif(m, ifp); /* Do RX checksumming */ if ((sc->sc_quirk & RTKQ_DESCV2) == 0) { /* Check IP header checksum */ if ((rxstat & RE_RDESC_STAT_PROTOID) != 0) { m->m_pkthdr.csum_flags |= M_CSUM_IPv4; if (rxstat & RE_RDESC_STAT_IPSUMBAD) m->m_pkthdr.csum_flags |= M_CSUM_IPv4_BAD; /* Check TCP/UDP checksum */ if (RE_TCPPKT(rxstat)) { m->m_pkthdr.csum_flags |= M_CSUM_TCPv4; if (rxstat & RE_RDESC_STAT_TCPSUMBAD) m->m_pkthdr.csum_flags |= M_CSUM_TCP_UDP_BAD; } else if (RE_UDPPKT(rxstat)) { m->m_pkthdr.csum_flags |= M_CSUM_UDPv4; if (rxstat & RE_RDESC_STAT_UDPSUMBAD) { /* * XXX: 8139C+ thinks UDP csum * 0xFFFF is bad, force software * calculation. */ if (sc->sc_quirk & RTKQ_8139CPLUS) m->m_pkthdr.csum_flags &= ~M_CSUM_UDPv4; else m->m_pkthdr.csum_flags |= M_CSUM_TCP_UDP_BAD; } } } } else { /* Check IPv4 header checksum */ if ((rxvlan & RE_RDESC_VLANCTL_IPV4) != 0) { m->m_pkthdr.csum_flags |= M_CSUM_IPv4; if (rxstat & RE_RDESC_STAT_IPSUMBAD) m->m_pkthdr.csum_flags |= M_CSUM_IPv4_BAD; /* Check TCPv4/UDPv4 checksum */ if (RE_TCPPKT(rxstat)) { m->m_pkthdr.csum_flags |= M_CSUM_TCPv4; if (rxstat & RE_RDESC_STAT_TCPSUMBAD) m->m_pkthdr.csum_flags |= M_CSUM_TCP_UDP_BAD; } else if (RE_UDPPKT(rxstat)) { m->m_pkthdr.csum_flags |= M_CSUM_UDPv4; if (rxstat & RE_RDESC_STAT_UDPSUMBAD) m->m_pkthdr.csum_flags |= M_CSUM_TCP_UDP_BAD; } } /* XXX Check TCPv6/UDPv6 checksum? */ } if (rxvlan & RE_RDESC_VLANCTL_TAG) { vlan_set_tag(m, bswap16(rxvlan & RE_RDESC_VLANCTL_DATA)); } if_percpuq_enqueue(ifp->if_percpuq, m); } sc->re_ldata.re_rx_prodidx = i; } static void re_txeof(struct rtk_softc *sc) { struct ifnet *ifp; struct re_txq *txq; uint32_t txstat; int idx, descidx; ifp = &sc->ethercom.ec_if; for (idx = sc->re_ldata.re_txq_considx; sc->re_ldata.re_txq_free < RE_TX_QLEN; idx = RE_NEXT_TXQ(sc, idx), sc->re_ldata.re_txq_free++) { txq = &sc->re_ldata.re_txq[idx]; KASSERT(txq->txq_mbuf != NULL); descidx = txq->txq_descidx; RE_TXDESCSYNC(sc, descidx, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); txstat = le32toh(sc->re_ldata.re_tx_list[descidx].re_cmdstat); RE_TXDESCSYNC(sc, descidx, BUS_DMASYNC_PREREAD); KASSERT((txstat & RE_TDESC_CMD_EOF) != 0); if (txstat & RE_TDESC_CMD_OWN) { break; } sc->re_ldata.re_tx_free += txq->txq_nsegs; KASSERT(sc->re_ldata.re_tx_free <= RE_TX_DESC_CNT(sc)); bus_dmamap_sync(sc->sc_dmat, txq->txq_dmamap, 0, txq->txq_dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, txq->txq_dmamap); m_freem(txq->txq_mbuf); txq->txq_mbuf = NULL; if (txstat & (RE_TDESC_STAT_EXCESSCOL | RE_TDESC_STAT_COLCNT)) ifp->if_collisions++; if (txstat & RE_TDESC_STAT_TXERRSUM) ifp->if_oerrors++; else ifp->if_opackets++; } sc->re_ldata.re_txq_considx = idx; if (sc->re_ldata.re_txq_free > RE_NTXDESC_RSVD) ifp->if_flags &= ~IFF_OACTIVE; /* * If not all descriptors have been released reaped yet, * reload the timer so that we will eventually get another * interrupt that will cause us to re-enter this routine. * This is done in case the transmitter has gone idle. */ if (sc->re_ldata.re_txq_free < RE_TX_QLEN) { if ((sc->sc_quirk & RTKQ_IM_HW) == 0) CSR_WRITE_4(sc, RTK_TIMERCNT, 1); if ((sc->sc_quirk & RTKQ_PCIE) != 0) { /* * Some chips will ignore a second TX request * issued while an existing transmission is in * progress. If the transmitter goes idle but * there are still packets waiting to be sent, * we need to restart the channel here to flush * them out. This only seems to be required with * the PCIe devices. */ CSR_WRITE_1(sc, RTK_GTXSTART, RTK_TXSTART_START); } } else ifp->if_timer = 0; } static void re_tick(void *arg) { struct rtk_softc *sc = arg; int s; /* XXX: just return for 8169S/8110S with rev 2 or newer phy */ s = splnet(); mii_tick(&sc->mii); splx(s); callout_reset(&sc->rtk_tick_ch, hz, re_tick, sc); } int re_intr(void *arg) { struct rtk_softc *sc = arg; struct ifnet *ifp; uint16_t status; int handled = 0; if (!device_has_power(sc->sc_dev)) return 0; ifp = &sc->ethercom.ec_if; if ((ifp->if_flags & IFF_UP) == 0) return 0; const uint16_t status_mask = (sc->sc_quirk & RTKQ_IM_HW) ? RTK_INTRS_IM_HW : RTK_INTRS_CPLUS; for (;;) { status = CSR_READ_2(sc, RTK_ISR); /* If the card has gone away the read returns 0xffff. */ if (status == 0xffff) break; if (status) { handled = 1; CSR_WRITE_2(sc, RTK_ISR, status); } if ((status & status_mask) == 0) break; if (status & (RTK_ISR_RX_OK | RTK_ISR_RX_ERR)) re_rxeof(sc); if (status & (RTK_ISR_TIMEOUT_EXPIRED | RTK_ISR_TX_ERR | RTK_ISR_TX_DESC_UNAVAIL | RTK_ISR_TX_OK)) re_txeof(sc); if (status & RTK_ISR_SYSTEM_ERR) { re_init(ifp); } if (status & RTK_ISR_LINKCHG) { callout_stop(&sc->rtk_tick_ch); re_tick(sc); } } if (handled) if_schedule_deferred_start(ifp); rnd_add_uint32(&sc->rnd_source, status); return handled; } /* * Main transmit routine for C+ and gigE NICs. */ static void re_start(struct ifnet *ifp) { struct rtk_softc *sc; struct mbuf *m; bus_dmamap_t map; struct re_txq *txq; struct re_desc *d; uint32_t cmdstat, re_flags, vlanctl; int ofree, idx, error, nsegs, seg; int startdesc, curdesc, lastdesc; bool pad; sc = ifp->if_softc; ofree = sc->re_ldata.re_txq_free; for (idx = sc->re_ldata.re_txq_prodidx;; idx = RE_NEXT_TXQ(sc, idx)) { IFQ_POLL(&ifp->if_snd, m); if (m == NULL) break; if (sc->re_ldata.re_txq_free == 0 || sc->re_ldata.re_tx_free == 0) { /* no more free slots left */ ifp->if_flags |= IFF_OACTIVE; break; } /* * Set up checksum offload. Note: checksum offload bits must * appear in all descriptors of a multi-descriptor transmit * attempt. (This is according to testing done with an 8169 * chip. I'm not sure if this is a requirement or a bug.) */ vlanctl = 0; if ((m->m_pkthdr.csum_flags & M_CSUM_TSOv4) != 0) { uint32_t segsz = m->m_pkthdr.segsz; if ((sc->sc_quirk & RTKQ_DESCV2) == 0) { re_flags = RE_TDESC_CMD_LGSEND | (segsz << RE_TDESC_CMD_MSSVAL_SHIFT); } else { re_flags = RE_TDESC_CMD_LGSEND_V4; vlanctl |= (segsz << RE_TDESC_VLANCTL_MSSVAL_SHIFT); } } else { /* * set RE_TDESC_CMD_IPCSUM if any checksum offloading * is requested. otherwise, RE_TDESC_CMD_TCPCSUM/ * RE_TDESC_CMD_UDPCSUM doesn't make effects. */ re_flags = 0; if ((m->m_pkthdr.csum_flags & (M_CSUM_IPv4 | M_CSUM_TCPv4 | M_CSUM_UDPv4)) != 0) { if ((sc->sc_quirk & RTKQ_DESCV2) == 0) { re_flags |= RE_TDESC_CMD_IPCSUM; if (m->m_pkthdr.csum_flags & M_CSUM_TCPv4) { re_flags |= RE_TDESC_CMD_TCPCSUM; } else if (m->m_pkthdr.csum_flags & M_CSUM_UDPv4) { re_flags |= RE_TDESC_CMD_UDPCSUM; } } else { vlanctl |= RE_TDESC_VLANCTL_IPCSUM; if (m->m_pkthdr.csum_flags & M_CSUM_TCPv4) { vlanctl |= RE_TDESC_VLANCTL_TCPCSUM; } else if (m->m_pkthdr.csum_flags & M_CSUM_UDPv4) { vlanctl |= RE_TDESC_VLANCTL_UDPCSUM; } } } } txq = &sc->re_ldata.re_txq[idx]; map = txq->txq_dmamap; error = bus_dmamap_load_mbuf(sc->sc_dmat, map, m, BUS_DMA_WRITE|BUS_DMA_NOWAIT); if (__predict_false(error)) { /* XXX try to defrag if EFBIG? */ printf("%s: can't map mbuf (error %d)\n", device_xname(sc->sc_dev), error); IFQ_DEQUEUE(&ifp->if_snd, m); m_freem(m); ifp->if_oerrors++; continue; } nsegs = map->dm_nsegs; pad = false; if (__predict_false(m->m_pkthdr.len <= RE_IP4CSUMTX_PADLEN && (re_flags & RE_TDESC_CMD_IPCSUM) != 0 && (sc->sc_quirk & RTKQ_DESCV2) == 0)) { pad = true; nsegs++; } if (nsegs > sc->re_ldata.re_tx_free) { /* * Not enough free descriptors to transmit this packet. */ ifp->if_flags |= IFF_OACTIVE; bus_dmamap_unload(sc->sc_dmat, map); break; } IFQ_DEQUEUE(&ifp->if_snd, m); /* * Make sure that the caches are synchronized before we * ask the chip to start DMA for the packet data. */ bus_dmamap_sync(sc->sc_dmat, map, 0, map->dm_mapsize, BUS_DMASYNC_PREWRITE); /* * Set up hardware VLAN tagging. Note: vlan tag info must * appear in all descriptors of a multi-descriptor * transmission attempt. */ if (vlan_has_tag(m)) vlanctl |= bswap16(vlan_get_tag(m)) | RE_TDESC_VLANCTL_TAG; /* * Map the segment array into descriptors. * Note that we set the start-of-frame and * end-of-frame markers for either TX or RX, * but they really only have meaning in the TX case. * (In the RX case, it's the chip that tells us * where packets begin and end.) * We also keep track of the end of the ring * and set the end-of-ring bits as needed, * and we set the ownership bits in all except * the very first descriptor. (The caller will * set this descriptor later when it start * transmission or reception.) */ curdesc = startdesc = sc->re_ldata.re_tx_nextfree; lastdesc = -1; for (seg = 0; seg < map->dm_nsegs; seg++, curdesc = RE_NEXT_TX_DESC(sc, curdesc)) { d = &sc->re_ldata.re_tx_list[curdesc]; #ifdef DIAGNOSTIC RE_TXDESCSYNC(sc, curdesc, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); cmdstat = le32toh(d->re_cmdstat); RE_TXDESCSYNC(sc, curdesc, BUS_DMASYNC_PREREAD); if (cmdstat & RE_TDESC_STAT_OWN) { panic("%s: tried to map busy TX descriptor", device_xname(sc->sc_dev)); } #endif d->re_vlanctl = htole32(vlanctl); re_set_bufaddr(d, map->dm_segs[seg].ds_addr); cmdstat = re_flags | map->dm_segs[seg].ds_len; if (seg == 0) cmdstat |= RE_TDESC_CMD_SOF; else cmdstat |= RE_TDESC_CMD_OWN; if (curdesc == (RE_TX_DESC_CNT(sc) - 1)) cmdstat |= RE_TDESC_CMD_EOR; if (seg == nsegs - 1) { cmdstat |= RE_TDESC_CMD_EOF; lastdesc = curdesc; } d->re_cmdstat = htole32(cmdstat); RE_TXDESCSYNC(sc, curdesc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); } if (__predict_false(pad)) { d = &sc->re_ldata.re_tx_list[curdesc]; d->re_vlanctl = htole32(vlanctl); re_set_bufaddr(d, RE_TXPADDADDR(sc)); cmdstat = re_flags | RE_TDESC_CMD_OWN | RE_TDESC_CMD_EOF | (RE_IP4CSUMTX_PADLEN + 1 - m->m_pkthdr.len); if (curdesc == (RE_TX_DESC_CNT(sc) - 1)) cmdstat |= RE_TDESC_CMD_EOR; d->re_cmdstat = htole32(cmdstat); RE_TXDESCSYNC(sc, curdesc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); lastdesc = curdesc; curdesc = RE_NEXT_TX_DESC(sc, curdesc); } KASSERT(lastdesc != -1); /* Transfer ownership of packet to the chip. */ sc->re_ldata.re_tx_list[startdesc].re_cmdstat |= htole32(RE_TDESC_CMD_OWN); RE_TXDESCSYNC(sc, startdesc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); /* update info of TX queue and descriptors */ txq->txq_mbuf = m; txq->txq_descidx = lastdesc; txq->txq_nsegs = nsegs; sc->re_ldata.re_txq_free--; sc->re_ldata.re_tx_free -= nsegs; sc->re_ldata.re_tx_nextfree = curdesc; /* * If there's a BPF listener, bounce a copy of this frame * to him. */ bpf_mtap(ifp, m, BPF_D_OUT); } if (sc->re_ldata.re_txq_free < ofree) { /* * TX packets are enqueued. */ sc->re_ldata.re_txq_prodidx = idx; /* * Start the transmitter to poll. * * RealTek put the TX poll request register in a different * location on the 8169 gigE chip. I don't know why. */ if ((sc->sc_quirk & RTKQ_8139CPLUS) != 0) CSR_WRITE_1(sc, RTK_TXSTART, RTK_TXSTART_START); else CSR_WRITE_1(sc, RTK_GTXSTART, RTK_TXSTART_START); if ((sc->sc_quirk & RTKQ_IM_HW) == 0) { /* * Use the countdown timer for interrupt moderation. * 'TX done' interrupts are disabled. Instead, we reset * the countdown timer, which will begin counting until * it hits the value in the TIMERINT register, and then * trigger an interrupt. Each time we write to the * TIMERCNT register, the timer count is reset to 0. */ CSR_WRITE_4(sc, RTK_TIMERCNT, 1); } /* * Set a timeout in case the chip goes out to lunch. */ ifp->if_timer = 5; } } static int re_init(struct ifnet *ifp) { struct rtk_softc *sc = ifp->if_softc; uint32_t rxcfg = 0; uint16_t cfg; int error; #ifdef RE_USE_EECMD const uint8_t *enaddr; uint32_t reg; #endif if ((error = re_enable(sc)) != 0) goto out; /* * Cancel pending I/O and free all RX/TX buffers. */ re_stop(ifp, 0); re_reset(sc); /* * Enable C+ RX and TX mode, as well as VLAN stripping and * RX checksum offload. We must configure the C+ register * before all others. */ cfg = RE_CPLUSCMD_PCI_MRW; /* * XXX: For old 8169 set bit 14. * For 8169S/8110S and above, do not set bit 14. */ if ((sc->sc_quirk & RTKQ_8169NONS) != 0) cfg |= (0x1 << 14); if ((sc->ethercom.ec_capenable & ETHERCAP_VLAN_HWTAGGING) != 0) cfg |= RE_CPLUSCMD_VLANSTRIP; if ((ifp->if_capenable & (IFCAP_CSUM_IPv4_Rx | IFCAP_CSUM_TCPv4_Rx | IFCAP_CSUM_UDPv4_Rx)) != 0) cfg |= RE_CPLUSCMD_RXCSUM_ENB; if ((sc->sc_quirk & RTKQ_MACSTAT) != 0) { cfg |= RE_CPLUSCMD_MACSTAT_DIS; cfg |= RE_CPLUSCMD_TXENB; } else cfg |= RE_CPLUSCMD_RXENB | RE_CPLUSCMD_TXENB; CSR_WRITE_2(sc, RTK_CPLUS_CMD, cfg); /* XXX: from Realtek-supplied Linux driver. Wholly undocumented. */ if ((sc->sc_quirk & RTKQ_8139CPLUS) == 0) { if ((sc->sc_quirk & RTKQ_IM_HW) == 0) { CSR_WRITE_2(sc, RTK_IM, 0x0000); } else { CSR_WRITE_2(sc, RTK_IM, 0x5151); } } DELAY(10000); #ifdef RE_USE_EECMD /* * Init our MAC address. Even though the chipset * documentation doesn't mention it, we need to enter "Config * register write enable" mode to modify the ID registers. */ CSR_WRITE_1(sc, RTK_EECMD, RTK_EEMODE_WRITECFG); enaddr = CLLADDR(ifp->if_sadl); reg = enaddr[0] | (enaddr[1] << 8) | (enaddr[2] << 16) | (enaddr[3] << 24); CSR_WRITE_4(sc, RTK_IDR0, reg); reg = enaddr[4] | (enaddr[5] << 8); CSR_WRITE_4(sc, RTK_IDR4, reg); CSR_WRITE_1(sc, RTK_EECMD, RTK_EEMODE_OFF); #endif /* * For C+ mode, initialize the RX descriptors and mbufs. */ re_rx_list_init(sc); re_tx_list_init(sc); /* * Load the addresses of the RX and TX lists into the chip. */ CSR_WRITE_4(sc, RTK_RXLIST_ADDR_HI, RE_ADDR_HI(sc->re_ldata.re_rx_list_map->dm_segs[0].ds_addr)); CSR_WRITE_4(sc, RTK_RXLIST_ADDR_LO, RE_ADDR_LO(sc->re_ldata.re_rx_list_map->dm_segs[0].ds_addr)); CSR_WRITE_4(sc, RTK_TXLIST_ADDR_HI, RE_ADDR_HI(sc->re_ldata.re_tx_list_map->dm_segs[0].ds_addr)); CSR_WRITE_4(sc, RTK_TXLIST_ADDR_LO, RE_ADDR_LO(sc->re_ldata.re_tx_list_map->dm_segs[0].ds_addr)); if (sc->sc_quirk & RTKQ_RXDV_GATED) { CSR_WRITE_4(sc, RTK_MISC, CSR_READ_4(sc, RTK_MISC) & ~RTK_MISC_RXDV_GATED_EN); } /* * Enable transmit and receive. */ if ((sc->sc_quirk & RTKQ_TXRXEN_LATER) == 0) CSR_WRITE_1(sc, RTK_COMMAND, RTK_CMD_TX_ENB | RTK_CMD_RX_ENB); /* * Set the initial TX and RX configuration. */ if (sc->re_testmode && (sc->sc_quirk & RTKQ_8169NONS) != 0) { /* test mode is needed only for old 8169 */ CSR_WRITE_4(sc, RTK_TXCFG, RE_TXCFG_CONFIG | RTK_LOOPTEST_ON); } else CSR_WRITE_4(sc, RTK_TXCFG, RE_TXCFG_CONFIG); CSR_WRITE_1(sc, RTK_EARLY_TX_THRESH, 16); CSR_WRITE_4(sc, RTK_RXCFG, RE_RXCFG_CONFIG); /* Set the individual bit to receive frames for this host only. */ rxcfg = CSR_READ_4(sc, RTK_RXCFG); rxcfg |= RTK_RXCFG_RX_INDIV; /* If we want promiscuous mode, set the allframes bit. */ if (ifp->if_flags & IFF_PROMISC) rxcfg |= RTK_RXCFG_RX_ALLPHYS; else rxcfg &= ~RTK_RXCFG_RX_ALLPHYS; CSR_WRITE_4(sc, RTK_RXCFG, rxcfg); /* * Set capture broadcast bit to capture broadcast frames. */ if (ifp->if_flags & IFF_BROADCAST) rxcfg |= RTK_RXCFG_RX_BROAD; else rxcfg &= ~RTK_RXCFG_RX_BROAD; CSR_WRITE_4(sc, RTK_RXCFG, rxcfg); /* * Program the multicast filter, if necessary. */ rtk_setmulti(sc); /* * some chips require to enable TX/RX *AFTER* TX/RX configuration */ if ((sc->sc_quirk & RTKQ_TXRXEN_LATER) != 0) CSR_WRITE_1(sc, RTK_COMMAND, RTK_CMD_TX_ENB | RTK_CMD_RX_ENB); /* * Enable interrupts. */ if (sc->re_testmode) CSR_WRITE_2(sc, RTK_IMR, 0); else if ((sc->sc_quirk & RTKQ_IM_HW) != 0) CSR_WRITE_2(sc, RTK_IMR, RTK_INTRS_IM_HW); else CSR_WRITE_2(sc, RTK_IMR, RTK_INTRS_CPLUS); /* Start RX/TX process. */ CSR_WRITE_4(sc, RTK_MISSEDPKT, 0); #ifdef notdef /* Enable receiver and transmitter. */ CSR_WRITE_1(sc, RTK_COMMAND, RTK_CMD_TX_ENB | RTK_CMD_RX_ENB); #endif /* * Initialize the timer interrupt register so that * a timer interrupt will be generated once the timer * reaches a certain number of ticks. The timer is * reloaded on each transmit. This gives us TX interrupt * moderation, which dramatically improves TX frame rate. */ unsigned defer; /* timer interval / ns */ unsigned period; /* busclock period / ns */ /* * Maximum frame rate * 1500 byte PDU -> 81274 Hz * 46 byte PDU -> 1488096 Hz * * Deferring interrupts by up to 128us needs descriptors for * 1500 byte PDU -> 10.4 frames * 46 byte PDU -> 190.4 frames * */ defer = 128000; if ((sc->sc_quirk & RTKQ_IM_HW) != 0) { period = 1; defer = 0; } else if ((sc->sc_quirk & RTKQ_PCIE) != 0) { period = 8; } else { switch (CSR_READ_1(sc, RTK_CFG2_BUSFREQ) & 0x7) { case RTK_BUSFREQ_33MHZ: period = 30; break; case RTK_BUSFREQ_66MHZ: period = 15; break; default: /* lowest possible clock */ period = 60; break; } } /* Timer Interrupt register address varies */ uint16_t re8139_reg; if ((sc->sc_quirk & RTKQ_8139CPLUS) != 0) re8139_reg = RTK_TIMERINT; else re8139_reg = RTK_TIMERINT_8169; CSR_WRITE_4(sc, re8139_reg, defer / period); if ((sc->sc_quirk & RTKQ_8139CPLUS) == 0) { /* * For 8169 gigE NICs, set the max allowed RX packet * size so we can receive jumbo frames. */ CSR_WRITE_2(sc, RTK_MAXRXPKTLEN, 16383); } if (sc->re_testmode) return 0; CSR_WRITE_1(sc, RTK_CFG1, RTK_CFG1_DRVLOAD); ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; callout_reset(&sc->rtk_tick_ch, hz, re_tick, sc); out: if (error) { ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); ifp->if_timer = 0; printf("%s: interface not running\n", device_xname(sc->sc_dev)); } return error; } static int re_ioctl(struct ifnet *ifp, u_long command, void *data) { struct rtk_softc *sc = ifp->if_softc; struct ifreq *ifr = data; int s, error = 0; s = splnet(); switch (command) { case SIOCSIFMTU: /* * Disable jumbo frames if it's not supported. */ if ((sc->sc_quirk & RTKQ_NOJUMBO) != 0 && ifr->ifr_mtu > ETHERMTU) { error = EINVAL; break; } if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > ETHERMTU_JUMBO) error = EINVAL; else if ((error = ifioctl_common(ifp, command, data)) == ENETRESET) error = 0; break; default: if ((error = ether_ioctl(ifp, command, data)) != ENETRESET) break; error = 0; if (command == SIOCSIFCAP) error = (*ifp->if_init)(ifp); else if (command != SIOCADDMULTI && command != SIOCDELMULTI) ; else if (ifp->if_flags & IFF_RUNNING) rtk_setmulti(sc); break; } splx(s); return error; } static void re_watchdog(struct ifnet *ifp) { struct rtk_softc *sc; int s; sc = ifp->if_softc; s = splnet(); printf("%s: watchdog timeout\n", device_xname(sc->sc_dev)); ifp->if_oerrors++; re_txeof(sc); re_rxeof(sc); re_init(ifp); splx(s); } /* * Stop the adapter and free any mbufs allocated to the * RX and TX lists. */ static void re_stop(struct ifnet *ifp, int disable) { int i; struct rtk_softc *sc = ifp->if_softc; callout_stop(&sc->rtk_tick_ch); mii_down(&sc->mii); if ((sc->sc_quirk & RTKQ_CMDSTOP) != 0) CSR_WRITE_1(sc, RTK_COMMAND, RTK_CMD_STOPREQ | RTK_CMD_TX_ENB | RTK_CMD_RX_ENB); else CSR_WRITE_1(sc, RTK_COMMAND, 0x00); DELAY(1000); CSR_WRITE_2(sc, RTK_IMR, 0x0000); CSR_WRITE_2(sc, RTK_ISR, 0xFFFF); if (sc->re_head != NULL) { m_freem(sc->re_head); sc->re_head = sc->re_tail = NULL; } /* Free the TX list buffers. */ for (i = 0; i < RE_TX_QLEN; i++) { if (sc->re_ldata.re_txq[i].txq_mbuf != NULL) { bus_dmamap_unload(sc->sc_dmat, sc->re_ldata.re_txq[i].txq_dmamap); m_freem(sc->re_ldata.re_txq[i].txq_mbuf); sc->re_ldata.re_txq[i].txq_mbuf = NULL; } } /* Free the RX list buffers. */ for (i = 0; i < RE_RX_DESC_CNT; i++) { if (sc->re_ldata.re_rxsoft[i].rxs_mbuf != NULL) { bus_dmamap_unload(sc->sc_dmat, sc->re_ldata.re_rxsoft[i].rxs_dmamap); m_freem(sc->re_ldata.re_rxsoft[i].rxs_mbuf); sc->re_ldata.re_rxsoft[i].rxs_mbuf = NULL; } } if (disable) re_disable(sc); ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); ifp->if_timer = 0; }